[DIY] How to decrease engine bay temperature

[Izso]

And DIY CAI as well.

that's a very cool CAI holder. Where'd you get this done / bought?

 

[DanzEterna]

izso, that's not a cai holder la its an aftermarket air filter, go brothers can see a lot of those.
just cut some of the batang to fit the CAI

 

[3309]

izso, that's not a cai holder la its an aftermarket air filter, go brothers can see a lot of those.
just cut some of the batang to fit the CAI

Danz,
Yes you're right.

 

[vr2turbo]

that's a very cool CAI holder. Where'd you get this done / bought?

Not CAI as open to suck engine hot sir....

 

[3309]

I agree not perfect CAI but atleast there are still a lot of outside air coming thru the hose.

 

[vr2turbo]

I agree not perfect CAI but atleast there are still a lot of outside air coming thru the hose.

Maybe can close all those holes or shift filter to the bumper.....

 

[3309]

Just wait for my next DIY

 

[4gbanger]

can DIY this..

 

[3309]

Ha ha ha...I don't dare to do that...I don't want jay pee jay to be my good friend...

 

[DanzEterna]

Ha ha ha...I don't dare to do that...I don't want jay pee jay to be my good friend...

haha not only jpj, all of us will laugh at u :proud:

 

[3309]

ha ha ha...yes agree with you...
Anyway whose car is that...I want to rolling on the floor right now...ha ha ha...
But I saw before someone install at his Odyssey a scoop with double hole....so daring...

 

[3309]

Like this one...

 

[vr2turbo]

can DIY this..

Water go in woh! and hard to do polishing.....hahahahahaha

---------- Post added at 03:00 PM ---------- 6 hour anti-bump limit - Previous post was at 02:59 PM ----------

Like this one...

This one block air woh!......

 

[Saring]

hello guys need to know can this spray can also applied to engine block ?

where can i get ?
i want to spray my engine block to flat black any suggestion how to make it ?

I'm already take out all the internal part so need advise what spray can applied for block engine need flat black colour

:hmmmm:

 

[twistedichc]

hello guys need to know can this spray can also applied to engine block ?

where can i get ?
i want to spray my engine block to flat black any suggestion how to make it ?

I'm already take out all the internal part so need advise what spray can applied for block engine need flat black colour

:hmmmm:

yepp sure can use 1, manifold is hotter than block maaa

 

[ken yeang]

hello guys need to know can this spray can also applied to engine block ?

where can i get ?
i want to spray my engine block to flat black any suggestion how to make it ?

I'm already take out all the internal part so need advise what spray can applied for block engine need flat black colour

:hmmmm:

make sure the engine block is free from oil stain, grease or dirt. If not the paint wont stick properly and your spray paint will be a wasted effort.

Try engine degreaser. They are tough on heavy oil, grease, etc.

 

[vr2turbo]

make sure the engine block is free from oil stain, grease or dirt. If not the paint wont stick properly and your spray paint will be a wasted effort.

Try engine degreaser. They are tough on heavy oil, grease, etc.

Most engine degreaser are petroleum base therefore you may need to use soap to wash the degreaser off also and then let dry kao kao first

 

[Saring]

make sure the engine block is free from oil stain, grease or dirt. If not the paint wont stick properly and your spray paint will be a wasted effort.

Try engine degreaser. They are tough on heavy oil, grease, etc.

Most engine degreaser are petroleum base therefore you may need to use soap to wash the degreaser off also and then let dry kao kao first

Tq will buy engine degreaser this weekend, and wait for block coming back from machine shop after that i will start to build it back

 

[vr2turbo]

Tq will buy engine degreaser this weekend, and wait for block coming back from machine shop after that i will start to build it back

Sent to machine shop, come back should be quite clean, right? If not in the car you can clean with whatever solvents, rather than spray degreaser. Just make sure no dirt and oil before spraying

 

[twistedichc]

Tq will buy engine degreaser this weekend, and wait for block coming back from machine shop after that i will start to build it back

or u can go to hardware shop & try to find water based degreaser, ace should have lot for oil & grease, its spray leave rinse method.