supercharger on kelisa

[doityourself]

That figure is awesome for a standard motor, what brand of supercharger are you using??

 

[Boy1202]

Guys,
I'm driving a myvi 1.0 supercharger, basically the same engine with kelisa, just an extra DVVT solenoid :)

Not trying to show off or anything, but just sharing since some of u asked how would a supercharger kit work in a kelisa :D
Driving it is pretty fun! Torque at any time and not to mention the sweet supercharger whine

Results of the SC bolt on is pretty good!
Almost double whp on 0.4 bar boost ;)

this is stock, with apexi open pod + extractor only
http://lh5.ggpht.com/adrlo84/SAYcWRhFBXI/AAAAAAAADDY/T2KkvwqbVQ8/s800/DSC08705_blanked.jpg

this is after bolt on; still with stock internals
http://lh3.ggpht.com/_j0F3DQ-4kjU/Spcx8x5wgxI/AAAAAAAAIog/1aPWPmKKLSg/s800/090308%20dyno%20%28Medium%29.jpg


word of advice though; at 0.4 bar boost the engine can take it fine on the road, but if u track it in sepang etc, you're much better off installing a dual gasket minimum, coz it'll definitely leak / blow
My gasket went to heaven after 1 year

if i wan to modified my car with supercharger, is it i also need to pasang ECU(eg:emanage)??
coz the supercharger is not so expensive, but ECU cost a lot