I know about this mod but my intercooler pipe is forcing the intake pipe to push downward forcing the pod filter to be slanted instead of straight. So to construct a nice airbox, unless I redo the intercooler pipe, else it will not look good.
i used to work at a tuner shop 7 years ago and my job there is to fabricate parts like intake manifold, intercooler pipes, banana etc.. one thing for sure, if u wanna make ur banana not to crack is to weld one support from main flange to turbo flange.. so when receive hard vibration or impact it will absorb.
Guyz,,,, im driving wira aeroback 1.3cc... currently overhaul it and change the piston and clutch 1.6... and upgrade to disk brake too, so my 13 inch sport rim cnt fit it as the disk slightly bigger... so i wanted to...
Since Evo engines are 4G63T which is similar to my Airtrek Turbo's engine (essentially detuned 7.5 GTA motor), I thought of sharing my experiences with timing belt change.
205/45/16" Yokohama AR01 RM255 per piece, it's cheap(including: installation,balancing&Alignment)?How was it,nice or bad? or any recommend shop around Kepong?or other brand to recommend?Budget around Rm260max(per...