Apexera SAFC & VAFC

so we can set a mode for sav FC n b mode for top performance rite? if not mistaken safc 2 can set evry 200rpm and safc 1 can set at each 500rpm increament..
 
Sifuss, i got 1 more ques........

What is Knock sensor for? How to monitor it? how to see its ok or dangerous??

Thanks to who ever can explain to me...........thanks a lot
 
i think knock sensor to detect knocking in the engine.. does safc2 usually comes with G sensor?? anyone could enlighten bout G sensor?? wats it for??
 
Advantages is, it can tune your car become smoother & faster. Maybe save u'r Petrol.

Disadvantages, it still expensive gadget to play (1k++ with dyno & installation) & most wanted by theift.
 
dudes!!!! anyone can help me tuning my car??? ... mine is 6A12 (stock) with SAFC2 installed without dyno... anyplace around kajang / kl for dyno tune??? Need some advise...
 
Syamri said:
dudes!!!! anyone can help me tuning my car??? ... mine is 6A12 (stock) with SAFC2 installed without dyno... anyplace around kajang / kl for dyno tune??? Need some advise...

there are a lot of places 2 dyno tune ur car roun KL especially ar sunway.... its up 2 u if u wana dyno tune or jus tune on da road.. ur cars performance will depend on how good da tuner is...

4 me i jus tune my emanage on da road... no problems with da tuning but make sure u dun end up in an accident... even if tune on da dyno, some ppl will still fine tune on da road...

i got a few frens dat r tuners....
 
just wondering can the safc effect a car ecu in anyway? esp. if a wiring is wrongly done. Can the safc be repaired ? Where?
 
Apexi AFC on 2nd Gen Kelisa/Kenari

as i know apexi version 1 afc can tuned the first batch kelisa/kenari with japan made ecu, but second gen 1 ecu made from Philippine, any idea izzit possible to tune our 2nd gen kelisa/kenari ecu using apexi afc version 1 / 2? may some master here give an advice!

thanks! :shades_smile:
 
safc2 wiring diagram n instruction

who ever hav for safc 2 pls lend 2 me.. wanna make a copy

i wanna DIY install saf2 in my satria 1.6...

so if anyone hav manual... or any of u guys using safc2 on a 1.6 SOHC

let me know yeah... wanna DIY install....

thanx
 
i use 4g91 and later want to change head n blok to 4g93 but use 4g91 ECU n airflow sensor.. basicly i must change to 4g93 ECU n airflow sensor in order to get more AFR reading (ECU mapping) but dun have enough budget for that..
if I install SAFC, can it give me same result (better AFR than 4g91 ECU)rather than i change to 1.8 ECU?
 
anyone could past me manual n wiring diagram for safc2? cant download fr its site.. only blank pages came out
 
Check light ON with AFC NEO installed

hi,

I have just installed Apexi super afc neo to GSR and after installed, my check engine light keeps turning ON and OFF while driving. sometimes it would ON for fews seconds then went OFF, sometimes 1 to 2minutes. have double check the wiring diagram manual and all wires are connected properly.

wondering if anyone have the same problem and found a solution to it. would appreciate and help and comments coz have been try for few days with my mech yet couldnt solve it.

thanks in advanced.
 
anybody have a safc diagram for mazda 210

my fren have looking safc 5 button for mazda 210 la,,any body cant help then????
 
anybody cant help me,, diagram safc 5 button for mazda 210 engine.. in apex safc 5 button not diagram for this engine laa
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
 
paranoid_android said:
i use 4g91 and later want to change head n blok to 4g93 but use 4g91 ECU n airflow sensor.. basicly i must change to 4g93 ECU n airflow sensor in order to get more AFR reading (ECU mapping) but dun have enough budget for that..
if I install SAFC, can it give me same result (better AFR than 4g91 ECU)rather than i change to 1.8 ECU?
ECU 4g91 rev cut 7000rpm but 4g93 8000rpm
if you change airflow 4g93 only,, your afr is lean
if u change airflow and ECU,, your afr still lean
u have change airflow+ECU+injector
for AFR good result,, SAFC can do that i think laa
 
e819 said:
anyone could past me manual n wiring diagram for safc2? cant download fr its site.. only blank pages came out

u hv to update ur Adobe Reader in order to read the file...BTW, wat car n ecu running? i got the diagram as well
 
eclipse07,

Please use ODB-II Diag. Tools and check up the code.

Good Luck.
 
Successfully fix AFC Select on my Gen.2 and so far so good. Also try use Apexi NA Timer for check the A/F Ratio.
 
tuning an safc2

hye guys..

i need help from u guys on how 2 play wit my safc on a satria 1.6...

if can teach me wit details or links... on setting lo/hi trottle

n thoose kg/cm bla bla bla..

thanx....
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience