Mivec 1.8 jerking.

[Dbass]

The tuner quiet busy right now, need to wait when he is free....

 

[DanzEterna]

The tuner quiet busy right now, need to wait when he is free....

no need tuner to tune AFR can do yourself ma, get youtube to guide u, a lot of trial & errors.

 

[Dbass]

My car use VAFC, and also doesn't air/fuel meter. How I will to adjust and to know it's lean or rich every RPM?

 

[.:JiT_187:.]

Hi all,
i've exactly the same problem with yours from my 1.6 mivec
can i know what's the solution?
did u solved it?

thank you

 

[Dbass]

My mechanic adjust TPS sensor, idling sensor & timing- coil sensor...
Almost 90% solve the problem...

 

[.:JiT_187:.]

can u recommend the workshop u r doing this?
coz i've been face this problem really long time ago
and my mech can't solve it

thank you very much

 

[slipar]

diagnose ur car 1st..from there can read many info about ur mivec..if u have adj cam pulley get it dial properly also..many mivec problem occur due to the engine not properly tune..

 

[Dbass]

can u recommend the workshop u r doing this?
coz i've been face this problem really long time ago
and my mech can't solve it

thank you very much

This mechanic is nearby my house, at Taman Cempaka, Ampang. The shop name is V-One Auto aka "Bunga".

 

[.:JiT_187:.]

diagnose ur car 1st..from there can read many info about ur mivec..if u have adj cam pulley get it dial properly also..many mivec problem occur due to the engine not properly tune..

My Mivec is completely stock.
what else u suggest?

---------- Post added at 05:22 PM ---------- 6 hour anti-bump limit - Previous post was at 05:19 PM ----------

Thanks dude

---------- Post added at 05:22 PM ---------- 6 hour anti-bump limit - Previous post was at 05:22 PM ----------

This mechanic is nearby my house, at Taman Cempaka, Ampang. The shop name is V-One Auto aka "Bunga".

Thanks dude

 

[.:JiT_187:.]

diagnose ur car 1st..from there can read many info about ur mivec..if u have adj cam pulley get it dial properly also..many mivec problem occur due to the engine not properly tune..

any recommended workshop near old klang road area?
cause i'm from kuchai lama
thank you