LE club`

[AE82GT]

xenothrix, are u referring weld near or low arm bar there???

 

[tctho]

how many fingers can u put between the tire n fender if u use ae101 spring n abs?
my std spring n abs is kinda "auto lowering" my car. looking for cheapskate method to improve coz hv to save money for other things. oh ya. do u guys weld ur near the front wheels? the common LE problem? i dont know where should i do it coz the last time i ask, a mech told me is a 1 shot job. if the weld hold then it will hold, if the 1st job is bad then it's pretty hard to get it hold the next time.

ae101/ae111 hv 2 difference version. 4 door ae101/111 version very soft and the handling not as good as ae101/111 Levin version. If u want to upgrade make sure u get the Levin 101/111. After upgrade to Levin 101/111 suspension is around 3.5 to 4 finger from the fender depend on what rim saiz and tyre u use. Save ur money and direct upgrade to levin 101/111 n dont try to weld here and there and the end result not satisfied hv to redo will spend more money and time.

 

[xenothrix]

thanks all sifu. actually the kaki koyak... i can't even install the bar that azuan sold. hvnt custom the bar yet. my current std abs feels ok, not too bumpy. but when there r ppl in the back, it's floor sweeping time. kena bumps, when going across high n low place, kena. but overall if 1 person is damn nice.. LE lowered is really nice. u get the slightly garang feel. my front can only fit 3 fingers. behind is slightly higher.

 

[AE80]

guys... how much to repaint and body repair..for LE..it's take to RM5k ??and look to this.. can still be repair?
http://judytankgirl.speedpost.net/xshit.jpg?variant=raw
http://judytankgirl.speedpost.net/xfuck.jpg?variant=raw
...what do you guys think?

 

[AE82GT]

AE80, is tat ur car? its really serious damaged...

 

[AE80]

yea..that's my car..crashed last year..on september..but now i already found a new LE(EE80) and brought it for RM1.6K..but it's standard..2 years parking at this old man house..quite teruk juga dari segi luar..but frame+lantai still ok.sikit2 saja..and i tell him i wanna buy his car..first he offered me for RM2K..but then i brought it for RM1.6k.. 2E engine..and i start to swap my engine and everything that what i can use from my old car to this new car..and 3weeks ago.. this engine start working..i'm so happy.. http://judytankgirl.speedpost.net/01.jpg?variant=raw. .. hehehee..and now masuk workshops for body repair and re-paint..lots more work to do..hope it's finish this middle of august..body repair + repaint and change head lamp/signal++ i'll pay for RM4.8k .. it's worth???..

 

[adqelmy]

ok la than u got new LE just for 1.6k n put nice engine inside....hehehe....really cheap broooo....

 

[AE82GT]

Really worth it la...bought LE for rm1.6k sumore EE80 1.3 2E engine, the late model LE...

 

[mzh82]

yup.... 1.6k is cheap.... (i think so la)... 12valve isn't it?

 

[AE82GT]

EE80 is 12v 2E engine...

 

[tctho]

2E=12v
2A=8v

Doesn't matter whether 12v or 8v, as long as is Toyota engine sure tahan lasak

 

[RoLD]

what is the different between ee80 and ae80?

 

[tctho]

Anybody can tell what is the difference?

 

[andrewleec2]

dont know...anyone to help out here...

 

[AE82GT]

2E=12v (1.3cc)
2A,3A,4A=8v (2A=1.3cc, 3A=1.5cc, 4A=1.6cc)

The difference is the chassis & engine sure different la...signal light 12v longer while 8v shorter, dashboard curve oso different, EE80 is the last model for LE 1.3cc while AE82 is the last model for 1.6cc.

I guess my explanation is clear...if its nt true, feel free to correct...

 

[AE82GT]

I understand Shazmi3 is selling his car la....reason being given is got new project....hmmm wonder what is that....hehehe....

 

[andrewleec2]

Project: marriage? Could be, there are more comittments in that compare to a car. To sell my car for marriage...I will not do that...too much of effort put into it where money can't buy.

 

[AE82GT]

andrew, i agree with you....

 

[AE80]

..my ee80 only got until fourth gear...i dont know if it's ori or the gearbox already changed..but it's doesnt matter now. coz i already swap my 20valve from the ae80 that already crash to my new ee80..and forgot to tell ya..that it's need to mod a bit the bracket (mounting)..someone who need a part for LE..engine or whatever..freely tell me.. :D ..and some more..box meter for this ee80 is also different..using mph...i also got trueno ae101 parts from my old halfcut...now i'm facing just 1 prob..how to get my speedmeter (kmph/mph) working?..coz it's use analog cable..not digital..... -_-??? speedometer sensor issue............

 

[mcfurby]

shazmie wanna change car?
i tot he wanna use tat LE? wat happen to him?
i dont think he will get married at this age....he is young...almost same age as me leh.