I think u mean are the cams for these engines are interchangable. Rite? Definately all B series engine cams are able to swap btw each other.
For Honda cam... the best is B16B cam then B18CR cam... lastly B16A cam.
Port and polish must be very very careful to choose the right person. Workmanship no good means there goes ur head or block... problem forever exist... or the worst is blow ur engine...
stock B16a with `hattech gay' chip can give you in the 155whp region. the max on stock b16a is 156whp. fuel consumption wise, with current petrol price it can go from subang to bentong with RM10. hehehehehehe..
i know la abang zaki,where got that chip.but i know u also do a rechip work.dont mind la whose gay,either mie or abg zaki,hehehehe.mind to pm me how much it cost?
just a little difference between b16b n b18cr cams...if u r on a budjet,look for b18cr cams and tune with adj cam pulley..it should work lah but do not expext much power gain....
My glx in the process to swap 4g18 to 4g63t evo.... any brothers here got pics of the mounting at the timing belt side.... wat kind of mounting u guys use... cos 4g18 and 4g63 the lobang different... at least show me...
can anyone help me setting this type air charger..
i have use it..
actually it use to save the fuel..
but when i install this air charger to my satria 1.3
rm30 fuel can go just around 100km...
help me please!!