I think u mean are the cams for these engines are interchangable. Rite? Definately all B series engine cams are able to swap btw each other.
For Honda cam... the best is B16B cam then B18CR cam... lastly B16A cam.
Port and polish must be very very careful to choose the right person. Workmanship no good means there goes ur head or block... problem forever exist... or the worst is blow ur engine...
stock B16a with `hattech gay' chip can give you in the 155whp region. the max on stock b16a is 156whp. fuel consumption wise, with current petrol price it can go from subang to bentong with RM10. hehehehehehe..
i know la abang zaki,where got that chip.but i know u also do a rechip work.dont mind la whose gay,either mie or abg zaki,hehehehe.mind to pm me how much it cost?
just a little difference between b16b n b18cr cams...if u r on a budjet,look for b18cr cams and tune with adj cam pulley..it should work lah but do not expext much power gain....
I have a Starion G54B engine in a Pajero long wheel base, LO47 for normal daily driving and some off road when I'm free. The G54B is a 2.6L, in line 4, 8 valves EFI, turbocharge engine.
In the engine bay the...
Using td04, wif intercooler and bov etc..the problem is that at 1-3 gear..i dint get any boost...only when at 3rd gear, and when speed is near to 100kph,then the boost slowly creeps up..at 4th gear i dint get any...