I think u mean are the cams for these engines are interchangable. Rite? Definately all B series engine cams are able to swap btw each other.
For Honda cam... the best is B16B cam then B18CR cam... lastly B16A cam.
Port and polish must be very very careful to choose the right person. Workmanship no good means there goes ur head or block... problem forever exist... or the worst is blow ur engine...
stock B16a with `hattech gay' chip can give you in the 155whp region. the max on stock b16a is 156whp. fuel consumption wise, with current petrol price it can go from subang to bentong with RM10. hehehehehehe..
i know la abang zaki,where got that chip.but i know u also do a rechip work.dont mind la whose gay,either mie or abg zaki,hehehehe.mind to pm me how much it cost?
just a little difference between b16b n b18cr cams...if u r on a budjet,look for b18cr cams and tune with adj cam pulley..it should work lah but do not expext much power gain....
im just own my skyline GTT for few week,every thing is new to me.there some problem on my ride,hope all sifu-sifu can help me slove this problem.pls dun cucuk me
What's special about it?
Remember Mazda's overall win at the 24 Hours of Le Mans in 1991? The rotor-heads at Mazda sure do, and they created the Furai as a reminder of that accomplishment. Half concept car...
So... does anyone know where to buy carbon fibre fabric? These usually come in rolls at least one foot wide. I am looking for large pieces to make my own CF hood and doors for my FC. Its a long term project.