I think u mean are the cams for these engines are interchangable. Rite? Definately all B series engine cams are able to swap btw each other.
For Honda cam... the best is B16B cam then B18CR cam... lastly B16A cam.
Port and polish must be very very careful to choose the right person. Workmanship no good means there goes ur head or block... problem forever exist... or the worst is blow ur engine...
stock B16a with `hattech gay' chip can give you in the 155whp region. the max on stock b16a is 156whp. fuel consumption wise, with current petrol price it can go from subang to bentong with RM10. hehehehehehe..
i know la abang zaki,where got that chip.but i know u also do a rechip work.dont mind la whose gay,either mie or abg zaki,hehehehe.mind to pm me how much it cost?
just a little difference between b16b n b18cr cams...if u r on a budjet,look for b18cr cams and tune with adj cam pulley..it should work lah but do not expext much power gain....
Hi to sifus, im currently searching and surveying for a bot project on my 4G92 SOHC..i've come across IHI RHF4 turbo at mudah and cost are around RM200-300 compare to TD04/TD05 which is almost at RM600-900..RHF4...
Anyone here with VF34 on a 1.5/1.6L engine? (B.O.T.)
I would liked to know how's the response
Currently i'm on TD04L @ 1.0b
Spool up around 2.8k full boost around 3.2k and can hold boost up till rev cut at 6.2k
Thx...
Installed HKS twin plate (GD pro) recently. Got the ice cream sound when holding the clutch which is norm, but will there be any sound (for example, very soft "eeeee") sound when the car is idle and not holding...