what is the BEST BOOST CONTROLLER ?

What about Sard Trigger, i like the beeping sound when the boost reach it's peak, therefore i wont have to view the boost meter.

Greddy Profec is nice too, does the scramble boost button comes as a package?

Sum-dum-fuk : some says that tulang ikan may cause boost spike, is it true? :confused:

dont quite like sard trigger :P lol

nop, scramble button comes seperate, but u can make yourself one :P if i make for u rm100 lolx
 
ok Thankss ! but.. it look like hard to use it :driver:
any suggest more easily to control boost ?..
 
thomas from gt auto recommends me hks evc 5. but i personally prefer AVCR
 
HKS EVC is good stuff too , but err do u really want to spend that much cash on a boost controller ?

if u dnt mind buying it, then its good :)
few things i dnt like about the EVC , errr HKS writer to further play with it ? u have it ? hehehe
bt in terms of accuracy its good, the selenoid has a built in MAP sensor which
enables better and smoother closed loop application. Blitz , Greddy, Sard & Turbosmart , they all read boost pressure from the engine by vacuum hose till dashboard. Only AVCR and HKS reads them electronically using a MAP sensor.

From DSMlink source, it states that, AVCR , TURBOSMART & GREDDY uses the same type of selenoid valves , they come from the same manufacturer, AVCR , TURBOSMART & GREDDY do not make selenoid valves. All 3 uses the same mechanism & 2 wire design.

http://www.demon-tweeks.co.uk/resources/images/zoom/AETFG-EBOOST-40.jpg

http://www.clubrsx.com/graphics/00000001/APE-499-X003.jpg

http://carworks.gr/online/images/stories/parts/greddy/greddy_profecbspecii.jpg
 
ahak and those Draggers who want to use Trigger button on steering or etc

HKS EVC has it optional i tink around rm500
Greddy profec b also has it around rm450 bt can diy rm 5 ?
AVCR errr has it u just got to DIY normal switch rm5 ?

blitz DSBC ? i dont tink there is a trigger
about Turbosmart Dual Stage, there is a trigger comes with unit
about e-boost 2 has triggers too

but greddy is the most advanced trigger over here although its cheaper than the HKS cos its wireless
 
ahak and those Draggers who want to use Trigger button on steering or etc

HKS EVC has it optional i tink around rm500
Greddy profec b also has it around rm450 bt can diy rm 5 ?
AVCR errr has it u just got to DIY normal switch rm5 ?

blitz DSBC ? i dont tink there is a trigger
about Turbosmart Dual Stage, there is a trigger comes with unit
about e-boost 2 has triggers too

but greddy is the most advanced trigger over here although its cheaper than the HKS cos its wireless

i seriously hav no idea that it can be done by our self in such a simple way. i mean bout the trigger switch. it means that u can hav any design of the button that u want rite. correct me if i'm wrong.
 
i seriously hav no idea that it can be done by our self in such a simple way. i mean bout the trigger switch. it means that u can hav any design of the button that u want rite. correct me if i'm wrong.

its just simple wiring
like greddy wiring, u jst need to ground a cable with momentary switch from jalan pasal to switch from low to high boost
avcr is the same , u just need to ground a cable to the white wire (if not mistaken) to enable scramble boost
turbosmart e-boost will have similar setup to just ground them

but so far i love the design of sparco scramble button :P , can buy from N1
http://www.horsepowerfreaks.com/viewimageresize.asp?w=252&p=Sparco&f=Steering_Wheel_Accessories_External_Horn_Button_Kit
 
turbosmart e boost 2 price is cheaper than the evc5, around same price with avcr or might be cheaper than it and its also side by side with the blitz dual solenoid spec R if im not mistaken... im taking the 45psi version to do comparison.

for those who use manual boost controler. wanna do trigger button for scramble is superb easy... just loop a bypass frm your existing boost controller to the 4age aircond idle solenoid. wire a 12v signal to it and ground it via a switch positioned as u like. set your hi boost and there u go. hi low boost with kampung style trigger function:thefinger:
 
:confused: about the boost controller......
hard to learn...wiring ..blalalalala:stupid::banghead:
 
turboXS quad got 4 trigger switch,can be triggered by gear positioning sensor or just make 4 trigger switch trigger when ever u like or make it RPM based huhuhu gud for front wheel drive for traction issue
 
its just simple wiring
like greddy wiring, u jst need to ground a cable with momentary switch from jalan pasal to switch from low to high boost
avcr is the same , u just need to ground a cable to the white wire (if not mistaken) to enable scramble boost
turbosmart e-boost will have similar setup to just ground them

but so far i love the design of sparco scramble button :P , can buy from N1
http://www.horsepowerfreaks.com/viewimageresize.asp?w=252&p=Sparco&f=Steering_Wheel_Accessories_External_Horn_Button_Kit

ok thanx for the info. will try it soon...
 


Write your reply...

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience