venting BOV to open air

[chanl55]

No offense to u evo3, I was referring to E V O L U T I O N

Anyway, using a 4g93T here.

EZ,

Hehe. I dun work in production plant la. I work in office area..besides security is tight here man. heheh.. Hey, better watch the bleeder valves man. Last time I did a dyno, they said there was some leaking and they were right. Boost spiked at times. I removed it and problem solved. Dude, if u need any advice on the 4g93T I'll be more than glad to share my experiences or paast problems with u. Penang kia ma. Member ma!

Vestax,

Yea. I go to those sites too sometimes but one thing I really hate is that the measurement is different. Since they measure in PSI, I am too lazy to go find the damn formula to do the conversions to the boost ...etc but you are right. I've seen a lot of your postings and what you state usually has some backing ( you are not talking cock like some people). I lived in the states for quite a while and I do have some friends driving the eclipse gsx / gst and yeah. The engine is like our 4g63 vr4/evo series. I believe that your advice is sincere in nature and that you simply do not cock around here like some do. Cheers

 

[ezwong2002]

ves... like this u try b4 or not? heheh.. stock adjustable BOV... since u got all the tools and stuffs.

 

[evo3]

Chanl55, just joking niah ....... no offence....

WOW!!! working at Intel factory? can curi the sticker or not? hehehe :D

 

[chanl55]

Evo3,

None taken dude. Peace!

 

[Danny]

Originally posted by vestax@Dec 17 2004, 11:12
aiyo , evolution thinks its a win win situation , and then samore can say " i don't care what i write is correct or not " , if you don't write the correct stuff , people will get wrong information la bro & that is not good . you sound so narrow minded , cause you say people will correct you , but then you don't accept the fact insted you make your own theory and you think its right without proving it .

1g bov in chop shop la bro , about RM 50 like that , but standard one can hold up to 12 psi only , you need to crush it if your going to boost higher . but no point if your still on stock boost , cause your standard plastic bov can still hold the stock boost .

vestax, if u don't mind can u pass me the link on how to crush the bov? Still can't find it with google.

I think I found the reason to my boost leak, mainly due to boosting higher than 12psi, when I turn down the boost it feels better. Still using the stock vr4 steel bov.

 

[jinkl]

OPS.. i am the one who started the FIRE back hehe..
but this is really good INFORMATION apart of the errr...
:) i have already got my 1G blow off at $35 bucks ..
just something to do for the weekend..
sandpaper and gonna spray it..
ezwong :D the diagram for the top drill looks cool ..
but i notice the pistons for the vr4 is small eh :D compare to my previous blitz

 

[evo3]

Originally posted by Danny+Dec 18 2004, 02:27 -->

QUOTE (Danny @ Dec 18 2004, 02:27 )

--QuoteBegin-vestax

@Dec 17 2004, 11:12 aiyo , evolution thinks its a win win situation , and then samore can say " i don't care what i write is correct or not " , if you don't write the correct stuff , people will get wrong information la bro & that is not good . you sound so narrow minded , cause you say people will correct you , but then you don't accept the fact insted you make your own theory and you think its right without proving it . 1g bov in chop shop la bro , about RM 50 like that , but standard one can hold up to 12 psi only , you need to crush it if your going to boost higher . but no point if your still on stock boost , cause your standard plastic bov can still hold the stock boost .

vestax, if u don't mind can u pass me the link on how to crush the bov? Still can't find it with google. I think I found the reason to my boost leak, mainly due to boosting higher than 12psi, when I turn down the boost it feels better. Still using the stock vr4 steel bov. [/b][/quote] Danny, u can try JDM tuner, www.Vfaq.com ...... i think they got the info there....

 

[jinkl]

i just got my 1g blow off the other day.. $35 bucks..
then went and did my tapak $13 bucks ..
to fit evo 3 , u have to cut the tapak out and weld to a pipe as a tapak..
now my boost at 3rd gear goes 0.7 and 4th going 0.8
so do u tink my old plastic bov was rosak ?
i still getting -.8 at idle la ..

 

[Danny]

found the answer here - http://members.shaw.ca/costall/1000Q/Frame...swers-minor.htm

However there's no picture guide on where to crush, has anyone done this before? Supposedly you can't crush it too much otherwise there will be slower response.

 

[chanl55]

I think either EVOLUTION went on holiday or he's too chicken shit to reply

 

[vestax]

hahah maybe doing alot of R & D and later come back and fire us up with his research facts :lol:

 

[Danny]

go back ask for professor's help ...kekee

 

[jinkl]

hehe no one dare challenge u all la :D
he knows he silap cakap kekekeke

 

[chanl55]

haha,

Didn't u all know? EVOLUTION is a Physics professor. Anyways, jinkl and danny , I totally agree with u all. That bugger knows he's wrong already that's why he keep quiet.

 

[ezwong2002]

wah lan eh chanl55 early early in the morning wanna curse people already? :lol: wah.. ur fire still not out yet uh? dey.. come la.. yum char.. when how where la???? dun la everytime tulan tulan.. blood pressure can overboost la.. :lol:

 

[chanl55]

Bo tulan la,

Nothing to do ma come in here lo. Fire is out already. Just hate those cocky bastards...u know wat I mean. I'd like to repeat again and again just to remind everyone. Sorry, bad habit....hhehe. Yum char ar , u say la when...

 

[eddietee]

Anyone here know where to get the recirculation kit for SSQV? how much it costs? will the blow off sound gone after use the kit?

 

[algojo9]

aTTiTude n diSciPlinarY iS tHe mOst iMpoRtaNt
tO haNDLe uR macHine neeDs.... n uR reQUIremenT

 

[eddietee]

ALGOjO9,

i'm just asking help on the where to source for the re-circulation kit. Anything to do with attitude and discipline?? btw do you know what is the usage for it? Sorry ya...no offence here. :)