Need Sifus help on Upgrades for my Gsr

[xtremeleo]

i hope it solves ur problem too sir

 

[jinkl]

EVOMIVEC : the picture u r seeing is indeed a evo one laaa

vishnu : i guess u got the 38mm wastegate, so i guess if u get the 38mm also , do a small intlet and outlet pipe , cos 38mm is kinda overkill for a td04 , the actuator original flap is much much smaller than this.

a small example , u use a small straw and u blow air out, little air goes out although your mouth is the same size
now user a big straw , blow air out, lot of air goes out

thts the diffrence between the big n small wastegate, a big wastegate will let more exhaust air out, if its too big, it might cause boost drop n also lag, bt 38mm should be ok with a td04, just make the pipes smaller

 

[E-V-O-M-I-V-E-C]

EVOMIVEC : the picture u r seeing is indeed a evo one laaa

vishnu : i guess u got the 38mm wastegate, so i guess if u get the 38mm also , do a small intlet and outlet pipe , cos 38mm is kinda overkill for a td04 , the actuator original flap is much much smaller than this.

a small example , u use a small straw and u blow air out, little air goes out although your mouth is the same size
now user a big straw , blow air out, lot of air goes out

thts the diffrence between the big n small wastegate, a big wastegate will let more exhaust air out, if its too big, it might cause boost drop n also lag, bt 38mm should be ok with a td04, just make the pipes smaller

Thanks you so much !!! :D
gonna do one soon..so i jz weld the pin to open right?

 

[jinkl]

http://www.jakelatham.com/1gDSM/projects/external_wastegate/images/fp_green_02.jpg

port it out, remove the flapper goodbye :D

 

[vishnuruben]

EVOMIVEC : the picture u r seeing is indeed a evo one laaa

vishnu : i guess u got the 38mm wastegate, so i guess if u get the 38mm also , do a small intlet and outlet pipe , cos 38mm is kinda overkill for a td04 , the actuator original flap is much much smaller than this.

a small example , u use a small straw and u blow air out, little air goes out although your mouth is the same size
now user a big straw , blow air out, lot of air goes out

thts the diffrence between the big n small wastegate, a big wastegate will let more exhaust air out, if its too big, it might cause boost drop n also lag, bt 38mm should be ok with a td04, just make the pipes smaller

Bro i msgd u on FB.....Thank you for explaining ...=) can we get this fixed this wed?.....

 

[wongsengming]

if i was u, i will stick to the stock manifold ported nicely for better flow , the stainless steel for a td04 flange would be a waste

plug the wastegate at the o2 housing and not the manifold
like these
http://www.maperformance.com/products/map_DSM-O2-38-SS.jpg

http://www.jakelatham.com/1gDSM/projects/external_wastegate/images/fp_green_02.jpg

port it out, remove the flapper goodbye :D

simply awesome~! can i just use original GSR TD04L to do so? the downpipe with wastegate, and port it out remove the flapper

 

[zamwfcz]

http://www.jakelatham.com/1gDSM/projects/external_wastegate/images/fp_green_02.jpg

port it out, remove the flapper goodbye :D

i want to do like this..It's ok or not...for 16g evo.