DIY NOS

[CarroTT]

why dun u just fit a shieldtox can n picit the bottle terus lar
shieldtox has very powerful flammable propellants ler

 

[Northiswara]

why dun u just fit a shieldtox can n picit the bottle terus lar
shieldtox has very powerful flammable propellants ler

can't feel the G force of the gal wet feeling with this shieldtox larr.........

 

[del]

Hey u guys trying to promote sheildtox or wat

 

[JINEIL2EN]

if not shieldtox, then using Fumakila....

 

[Northiswara]

cosway mosquito killer also not bad.

 

[JINEIL2EN]

FUMAKILA H2O is the best.... increase O2 percentage... more burning power...

 

[K_Takuya]

why dont just diy 12v motor with fan? press the on switch and suck/compress/blow more air to your air filter/box..i think this is safer....

 

[Northiswara]

why dont just diy 12v motor with fan? press the on switch and suck/compress/blow more air to your air filter/box..i think this is safer....

i always have this idea but 1 drawback that is we cant control the speed of the fan in proportional to the engine rpm macam turbo. the higher u rev the more the fan spins. so u have to build a circuit that control the speed of the fan in proportional to the engine rpm. i not E&E guy so i stuck here.

 

[K_Takuya]

buy a cheap rpm meter, voltage controller and the set of fan and motor.

here is the idea..

you have to wired the motor the voltage controller and the rpm meter together.

when the rpm needle goes up, it will send more voltage to the motor (by using the voltage controller) this whole idea just involve mechanical setup..

a bit more explanation..think of a volume knob/controller. we turn the knob to turn the volume high is it? think if the turn of rpm needle function like the volume knob. maybe the voltage controller need to install somewhere at the rpm needle itself (maybe open the meter and connect the rpm meter motor directly to the voltage controller?)

ive done this project before but just without the rpm meter and the voltage controller. just on off switch on my dashboard..the fan motor maybe can get from 12v cigarette lighter car vacuum cleaner selling RM30 at the market...

performance gain? dont try compare with turbo..hehehe..

 

[Northiswara]

buy a cheap rpm meter, voltage controller and the set of fan and motor.

here is the idea..

you have to wired the motor the voltage controller and the rpm meter together.

when the rpm needle goes up, it will send more voltage to the motor (by using the voltage controller) this whole idea just involve mechanical setup..

a bit more explanation..think of a volume knob/controller. we turn the knob to turn the volume high is it? think if the turn of rpm needle function like the volume knob. maybe the voltage controller need to install somewhere at the rpm needle itself (maybe open the meter and connect the rpm meter motor directly to the voltage controller?)

ive done this project before but just without the rpm meter and the voltage controller. just on off switch on my dashboard..the fan motor maybe can get from 12v cigarette lighter car vacuum cleaner selling RM30 at the market...

performance gain? dont try compare with turbo..hehehe..

sounds cool but lazy to do it. haha.............. :sleep: :sleep:
then again once u press the button u wont feel like macam NOS kick in. so its kinda to me. i just wish i could buy a turbo car.

how much does those setup helps in ur car?

 

[K_Takuya]

if you grade NOS as 100 point, i think my setup maybe can give 5 point only..hahaha..

 

[JINEIL2EN]

so, keep the nos...hahahahaha...

 

[johnkor]

i think ts is asking regarding Flame Thrower not the NOS system