Suitable boost for stock E3

[pert]

Hi guys,

Mind to share how high (not really high la, just want to just nice when floor the pedal) the boost can be set on stock E3+fuel regulator+walbro+highcam.
stock boost is 0.6 rite? it is safe if set it to 0.8 or 1bar(use fish bone)?

Thanks..

 

[kumar22mostwanted]

Hi guys,

Mind to share how high (not really high la, just want to just nice when floor the pedal) the boost can be set on stock E3+fuel regulator+walbro+highcam.
stock boost is 0.6 rite? it is safe if set it to 0.8 or 1bar(use fish bone)?

Thanks..

hmm i feel better to just set at 1 bar by remap ur stock ecu and set the boost at 1 bar then at least u can tune your air fuel ratio also to suit the higher boost
but make sure u get external wastegate first if wanna boost higher
for e3 i feel 1bar boost is safest with stock internal higher than that takut detonation or pre-igintion than KABOOM!! so better be safe than sorry

 

[Newbienissan]

i think 0.8-0.9 bar is ok without remap/piggyback

 

[kumar22mostwanted]

i think 0.8-0.9 bar is ok without remap/piggyback

:hmmmm::hmmmm: yeap i guess thats ok then you just need either tulang ikan or boost controller if budget permits
yeah i guess it should be ok to up boost slightly higher than stock coz mitsu set their engines running rich anyways to avoid detonation but dun up boost 2 much maybe just tambah 0.1-0.2 bar :top:

 

[pert]

ok...thanks guys for all the info.
any shop would you guys recommend for remap my ecu?
normally what are the functions that will be override than stock ecu?
roughly how much it will cost me?

Thanks.

 

[pert]

any ideas guys...?

 

[Newbienissan]

find Optima Workshop in pandan indah : Ah Yee 012 231 3638
pro in mitsu engine