Saga / Iswara Rear Brake Disc Solution

GoldenHawk

500 RPM
Senior Member
Aug 6, 2004
777
0
3,016
Pumps can cost anywhere between RM150 - RM200 in halfcut condition.
Get it tested once you've got it & make sure you can return it in case it's leaky or has a problem.
Shouldn't cost more than RM200 for a VR4 double-layer servo :smile:
 

kweng84

2,000 RPM
Senior Member
Dec 22, 2005
2,245
6
1,638
PUCHONG
www.zerotohundred.com
Thanks bro. But, if i wanna remain it all stock. Will changing OEM brake pads and skim back the disc will help a lot? My disc got a bit of rough surface. Thanks.
 

kweng84

2,000 RPM
Senior Member
Dec 22, 2005
2,245
6
1,638
PUCHONG
www.zerotohundred.com
Today, i skimmed my disc and change OEM brake pads(MINTYE).

Some pics and a video to share.

BEFORE:



AFTER:


VIDEO:

LINK: kweng84/Z Pictures n Videos to share/SKIMMING BRAKE DISC - Photobucket - Video and Image Hosting

A lot a lot better already.

1 month ago, i changed brake oil. Bleed using vacuum, then use BOSCH DOT4 oil. Service the rear drums, changed new brake shoes and also new pumps.

Now, skimming and brake pads for better grip and it really works.

Skimming =RM60 with labor charge
MINTYE Brake Pads =RM45 with labor charge
 
Last edited:

steven7810

mivec user
Senior Member
Oct 12, 2004
1,314
26
3,148
kuala lumpur
hi hi good day to all proton saga or iswara driver,
i also drive 1 proton iswara sedan convert to MIVEC 4G92 DOCH, already 3 years.
Now i using all VR4 disc brake with double layer pump...very good also remember to check ur 4 rubber too.ok bye
 

sicness80

Known Member
Senior Member
Feb 16, 2007
70
0
1,506
Do anyone hav handbrake pro after change rear disc?my h.brake `tak makan` when parking at front house or the road down or up hill,foreman said the cable use long time n be long so i change the new set h.b.cable,at 1st 1-2weeks is very `makan`,but as long as use,still same,now i need to shift 1st gear to parking,cos scare my car ll `walk` itself :( ,can anyone help to solve tis pro?thx.
 

dstar

Active Member
Senior Member
Dec 12, 2006
26
0
1,501
Hi! i have a question? is it need to be modify then disk break then only can installed in iswara aero back?
Do any model then no need to modify and just installed only?:driver:
 

steven7810

mivec user
Senior Member
Oct 12, 2004
1,314
26
3,148
kuala lumpur
hiih is steven again. yes u need to modified the rear drum brake.just need and use back the screw parts only is hard to explain. since u guys install the rear disc brake is better u guys change the front disc also and master pump also make it 2 layer.

1. all 4 must VR4
2. brake pump 2 layer can use 1.8 proton putra or sv4 honda accord.
3. change the brake oil to DOT 4.

IF GOT MISTAKE VERY SORRY.
 

dstar

Active Member
Senior Member
Dec 12, 2006
26
0
1,501
hiih is steven again. yes u need to modified the rear drum brake.just need and use back the screw parts only is hard to explain. since u guys install the rear disc brake is better u guys change the front disc also and master pump also make it 2 layer.

1. all 4 must VR4
2. brake pump 2 layer can use 1.8 proton putra or sv4 honda accord.
3. change the brake oil to DOT 4.

IF GOT MISTAKE VERY SORRY.
Okay thank you.
anyway i have 1 ppl he 1 2 sell me the evo 3 disbreak!
but i dun know ask who to installed for me?
 

steven7810

mivec user
Senior Member
Oct 12, 2004
1,314
26
3,148
kuala lumpur
wah EVO 3 disc brake ok can try to contact me i got foreman to help u but dun how much will cost and charge.
u from where.
steven 017-2392780.i at kl.
 

steven7810

mivec user
Senior Member
Oct 12, 2004
1,314
26
3,148
kuala lumpur
so bad u at penang. remember to ask ur foreman to double check all system such like brake hos and front pad and the rear pad.bye happy driving
 

qib_akip

Known Member
Senior Member
Jul 14, 2006
286
1
1,518
KL & KUANTAN
ur cool bro... sharing methods with others does not loose money rite... i like u broo... cheerss.... eyy, can install one like above to my saga turbo arr?? u lump sump parts n labour laa of couse..
 

steven7810

mivec user
Senior Member
Oct 12, 2004
1,314
26
3,148
kuala lumpur
share with poeple no RUGI wat. right. if all vr4 brake now i not sure la last time the rear part brake cost me rm 700.00 plus labour and install and mod. now 4 pcs of vr4 maybe cost u rm 1k not sure better check with ur area kedai potong la.

i got 1 foreman driving putra 1.8 manual gear already install sky line brake with 4 pots front only the rear still use back ori putra.
 

juniorkirk

500 RPM
Senior Member
Jan 17, 2006
906
1
3,018
Hey guys,
why dont you all try to get Perdana V6 rear disc brake? another solution for iswara/saga. I've my one install few months ago.
 

SagaR3Supercharge

Active Member
Senior Member
Aug 30, 2008
27
0
1,501
i'm using perdana disc brake..

i'ts ok for me no need lots of modifications...:smokin:
 

scoty20

Known Member
Senior Member
Mar 31, 2007
145
0
1,516
Perdana rear disc no need mod to fit in iswara rear?
What is the cheapest solution for rear disc on iswara?Transplanting 4G91 into my iswara and the braking system need upgrade else won't pass puspakom.:banghead:

Bump: Perdana rear disc no need mod to fit in iswara rear?
What is the cheapest solution for rear disc on iswara?Transplanting 4G91 into my iswara and the braking system need upgrade else won't pass puspakom.:banghead:
 

steven7810

mivec user
Senior Member
Oct 12, 2004
1,314
26
3,148
kuala lumpur
hi hi scoty how are you.... is me steven... remember or not...

the rear disc brake u can use mirage,vr4 or like our friends say perdana...
i will say u better use all VR4 DISC BRAKE AND DOUBLE LAYER PUMP... IS GOOD..
 

gilbert5107

Known Member
Senior Member
May 30, 2007
149
6
1,518
i finding solution on rear disc for saga/iswara. wad i know vr4 rear the pad are hard to get. mostly all go for perdana or waja rear disc. i wanted to get a rear disc,my drum brake giving alot problem
 

scoty20

Known Member
Senior Member
Mar 31, 2007
145
0
1,516
Isit neccessary upgrading disc brake if transpanting 4G91 into iswara?JPJ set the rules?
 
Apr 3, 2009
1
0
1,501
hi need a bit of advice, im planning to change my iswara front brakes to the wira front brakes. can i plug and play? do i have to change the brake pump and all? need advice. appreciate from the bottom of my heart :)

Bump: hi need a bit of advice, im planning to change my iswara front brakes to the wira front brakes. can i plug and play? do i have to change the brake pump and all? need advice. appreciate from the bottom of my heart :)
 

Random Post Every 5 Minutes

A friend of mine wants to build a custom exhaust & turbo manifold(fitting a larger turbo), dumpipe and FMIC. He wants good quality workmanship and is willing to pay for it.

He knows about Ah Heng in Subang Industrial Area and Jaafar in Sunway.

Any other places?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience