mods on Accord CF4

[wan_iswandy]

hahah pasni mampoos kita kena banned kat abe faisal..

pyang, please call me ASAP.. oredi call u but nobody answer.. korang tgh mancing ikan ebek ke?

 

[amdfaisal]

har har har... lotus elise thread must masuk proton py section kot because lotus belongs to proton hehe...

alwi... that bearing if want to take out... must pump out kan?

wandy... i can not ban anyone la... the moderator is doing the job not meeeee

 

[pyang8018]

74k... stock standard car... hmmm.. the bonus = FL version kot... no comment lah

Bump: pyang... if still interested... ori twin loop

http://www.zerotohundred.com/newforums/engine-and-performance/273257-plug-and-play-fd2-ori-mugen-twin-loop-exhaust.html

Bump: pyang... if still interested... ori twin loop

http://www.zerotohundred.com/newforums/engine-and-performance/273257-plug-and-play-fd2-ori-mugen-twin-loop-exhaust.html

hah....lambat sangat..x de rezeki kot..oredi buy FGK RM01A mufler..just waiting the extractor FGK/FEELS...hehehe

 

[alwhitesat]

tak sure la faisal....
pasal masa mekanik kasi kat aku dia dah siap buka

 

[pyang8018]

hahah pasni mampoos kita kena banned kat abe faisal..

pyang, please call me ASAP.. oredi call u but nobody answer.. korang tgh mancing ikan ebek ke?

why wandy??got problem????macam ne aku nak call...ekk..

Bump: abe anip....i want ori rear knuckle from CH9...eh..u bleh challenge abe cat77 la pas ni..bisness honda part...

 

[amdfaisal]

alwi... which pomen you went to? my CH9 knuckles are still inside the store room in kampung. no time to pasang

 

[pyang8018]

abe anip....i want ori rear knuckle from CH9..ada ker?eh..that header n extractor tu brape harga???..u bleh challenge abe cat77 la pas ni..bisness honda part...

 

[alwhitesat]

pomen pokok kayu somewhere in sentul......
buat kerja damn slow

 

[pyang8018]

abe faisal...u oso got CH9 rear knuckle kan...bg free to me la..u bg rumah la siap dulu...hehehe..byk pakai duit bang...

 

[amdfaisal]

mine depan punya la... rear i'm using CL1 punya. still got "euro-R" written on the hub. u want? can... RM1k la cincai

CL7R ekzoz... SGD100 only - real bargain if (half of) piping is included
http://www.shc-forum.com/viewtopic.php?t=165632

pyang... u said ur rear knuckles tebuk rite? what part u tebuk? the rotors or the bearings? if the rotors tebuk... i don't think there are issues. some aftermarket rotors can be used for 4 or 5 lobang wat.

bearings tebuk might be issues la but i'm using bearing tebuk for years oredy in front. so far no prob. otherwise EK9 bearings la geng... RM560 (LHS) for both sides but the pomen told me not too ngam so modded a bit... dono what he did la actually but he cut ape ntah.

EK9 bearings from bay brothers RM320 kot each... ngam2 fit

 

[F20B+B16B]

abe anip....i want ori rear knuckle from CH9..ada ker?eh..that header n extractor tu brape harga???..u bleh challenge abe cat77 la pas ni..bisness honda part...

cat77 and me bisnes partner hehehehe.for the extractor give me the time for thinking coz mugen extractor.i also waiting another mugen extractor from my fren just wait and give me the time ok

 

[amdfaisal]

pyang... then u buy FD2R rear rotors here

http://www.shc-forum.com/viewtopic.php?t=165569

 

[alwhitesat]

amd/intel....when can we play badminton??

 

[amdfaisal]

any dewan will do i think. PJ?

when... oppsss silap... terperasan where... jemaat la kot... instead of TT kita main badminton. amacam?

 

[F20B+B16B]

pyang !how much your budget for the extractor?
from mudah http://www.mudah.my/extractor-mugen-421-accord-selangor-1662735.htm?ca=8_s

 

[alwhitesat]

nak kena beli raket dulu la....
dah lama tak main, 10 tahun ada kot...

what is the best racket ar??

 

[wan_iswandy]

why wandy??got problem????macam ne aku nak call...ekk..
.

aikksss, that day u can call me..

my phone number 0139434055.. ur lips repairing in progress..

 

[nksc]

nak kena beli raket dulu la....
dah lama tak main, 10 tahun ada kot...

what is the best racket ar??

racket?must be yonex aaaa..carbonex..
raket pasar mlm pon ok..

 

[pyang8018]

pyang !how much your budget for the extractor?
from mudah http://www.mudah.my/extractor-mugen-421-accord-selangor-1662735.htm?ca=8_s

budget???:hmmmm:below 1K bleh???nnt i give u kepok lekor best punye..

Bump:

nak kena beli raket dulu la....
dah lama tak main, 10 tahun ada kot...

what is the best racket ar??

hahaha...sport good for u...aku pun nak main gak...racket squash la bang...

Bump:

aikksss, that day u can call me..

my phone number 0139434055.. ur lips repairing in progress..

right...but must get approve from my bos 1st..if can call anytime..bleh la aku bergayut...but kalu mlm...beres...hehehe. platform - onshore (semenanjung) 1 hour-rm90...calling rate...

Bump:

mine depan punya la... rear i'm using CL1 punya. still got "euro-R" written on the hub. u want? can... RM1k la cincai

CL7R ekzoz... SGD100 only - real bargain if (half of) piping is included
http://www.shc-forum.com/viewtopic.php?t=165632

pyang... u said ur rear knuckles tebuk rite? what part u tebuk? the rotors or the bearings? if the rotors tebuk... i don't think there are issues. some aftermarket rotors can be used for 4 or 5 lobang wat.

bearings tebuk might be issues la but i'm using bearing tebuk for years oredy in front. so far no prob. otherwise EK9 bearings la geng... RM560 (LHS) for both sides but the pomen told me not too ngam so modded a bit... dono what he did la actually but he cut ape ntah.

EK9 bearings from bay brothers RM320 kot each... ngam2 fit

1K for ur CL1 knuckle???ooooo...ini x adil......my mugen lips u want 250 je..mane untung bang..x pe...kite cari sendiri la..huhuhu...my rear bearing yg kena tebuk...

SGD100 for twin ekzos CL7R???geng..jom pakat pi Spore....

 

[amdfaisal]

the best racket???? mestilah yonex geng... but fleet is not bad oso... alah... klu tere racket 30 hengget pun boleh main macam aja... myself... i'm using carbonex8 that my father bought for his usage when i was 15 or younger... very old the racket...

pyang... of kos la rear knuckle more expensip than mugen lip. lip lembek saja... knuckle kerassss dan berat

Bump: the best racket???? mestilah yonex geng... but fleet is not bad oso... alah... klu tere racket 30 hengget pun boleh main macam aja... myself... i'm using carbonex8 that my father bought for his usage when i was 15 or younger... very old the racket...

pyang... of kos la rear knuckle more expensip than mugen lip. lip lembek saja... knuckle kerassss dan berat