Err....still dun understand....u want the centre cover of the steering ? The "H" logo piece ?
No sato-san, not the centre cover.. but the inside thingy - like the pix i posted, that inside centre thing (the centre is metal, and the surround is black plastic/rubber), there is a short rod in the middle where it is connected to the steering column later.
I guess it's gonna be hard to find one, so the alternatively is to get a steering with burst or missing airbag.. tension.. tension..
Bump:
me marah ppl not using english in here??? i never get angry for this kind of issue lah... i was only reminding ppl because the rules say so and the mod once deleted countless malay posts...
bulet... the guy from melaka has a set of SiR-T driveshaft. not sure if it fits a CL1 though. the price was RM420 or RM430 for the whole thing left and right.
pyang... that shop in sunway... is it the official recaro shop? if it is then cat77 can call the number below
Recaro Malaysia
No 30 Jalan PJS 11/16
Bandar Sunway
46150 Subang Jaya
Selangor
03-5637 2855
futsal... badminton la wei... syiok la badminton. less risk of injury. aja is badminton star. i once played with him... fuh dasat this brader aja. he represented malaysia kot
sloth... the recaro fabric replacement... you went to this shop ke?
http://www.h-performance.com.my/
amd,
no la.. i went to:-
1) one shop near mun lee puchong (got his advert somewhere here in zth) for the front seats.. claimed to be under VDP (vendor development program) for fabric replacement under mun lee but the workmanship is so-so only.. plus not really customer friendly. the shop is also not that impressive.
2) carbi deco near tesco puchong - went to rewrap my stoopid, incomplete steering and for fake CF of gear console. asked to rewrap my door panel but no CL1 fabric available. Shop seems ok, many high end cars - last visit saw maserati quattroporte..
3) a shop in seri kembangan industrial park (also got advert in zth).. workmanship nice and he knows about CL1/CF4 (bought 1 complete set CF4 seats for his corolla SEG - dunno how he fit the rear seats tho. can ka?). price quite expensive but as i was desperado and tired looking for shops, i just did it (in fact the remaining CL1 fabric left in his shop is just nicely enuff for my door panels).
badminton low risk injury ka? my wife torn her achilles tendon in december while playing badminton woo.. now while walking still tempang a bit.
and if not mistaken some time ago, got one prominent politician diead while playing badminton..
moral of the story:- sports are dangerous! be a professional couch potato like me then! hehehe
Bump:
that part i'm not sure la sato... i haven't ventured to that area yet. sloth showed me the list of items bought for the conversion from CF3 to CL1
SV4 driveshaft
SM4 driveshaft
balljoints
among others
sloth... if you have the time... can u detail everything here...
pyang did the same thing but no clear list of parts involved
after i bought the CL1 (CL1 ka? dunno laa.. bought from yewson) front and rear knuckles, the installation need:-
1) d/shaft SV4 (M) ABS
2) d/shaft SM4 (M) ABS
3) d/shaft cover
4) Ball joint
5) Grease (??? - hahahha aku tak paham tulisan die dlm resit, tp dlm RM30) d/shaft
5) nut d/shaft
6) brake fluid
7) labour cost
cost for barang2 = RM900, labour cost = RM300
Bump:
spacer n wiiiideee body... if nicely done will look nice... like a wide E46 nyam nyam
Bump: wandy... this is my car with grandpire euro-R potong lip to make way for the foglites
Bump: wandy... this is my car with grandpire euro-R potong lip to make way for the foglites
amd,
ur car in this pix looked like previous gen Mazda6 ler.. hehehe
where's ur grandpire front lip? i got the rear one.. maybe we both can donate to wandy before he get the real McCoy..
