mods on Accord CF4

[aja]

Faisal,

Going to Lumut kah?.

don't forget to makan ikan bakaq kat teluk Muroh, sebelah Outward Bound Lumut tuh..same to Teluk Batik.

But the price there a bit mahal la. Ketam 1kg siap masak around RM45.00!

So far, Kuala Kerteh is the cheapest. Ketam and other binatang laut siap masak is RM25 per kg. Marang also quite expensive.

 

[sloth]

Kuala Kerteh or Kuala Kemamang bro aja?

bien, dok berahi maghi sini kah? can eat binatang laut all the times.. huhuhu

 

[aja]

aja... if u get the E9, E7 can sell to me cheap hehe

Sure can. No problems!. Doa2 la me got any one of them...or ntah2 last2 tak dapat langsung ro dapat saguhati jer!. kekeke

In fact, they only asked me 1 question..what is the official color for Petronas?. For sure color same with PAS color lah. kekeke

 

[aja]

Kuala Kerteh or Kuala Kemamang bro aja?

bien, dok berahi maghi sini kah? can eat binatang laut all the times.. huhuhu

Kuala Kerteh. Masuk ikut small round-bout near Petronas Kerteh/MacD tuh.
Kuala Kemamang dok ade kedaiy makang, excpet for those kedai facing the Masjid Geliga. Those kedai also quite mahal. RM40 per kg siap masak for those binatang laut...flat rate.applied to all binatang laut.

Tapi the big taiko binatang ..udang quite mahal. RM100 per kg siap masak...but the freshness of those binatang laut arhhh.....hanya aku jer yang tahu!. kekeke

In fat, there got few kedai. Try to look the one near to the junction. Murah tuh!

 

[bien335]

sloth, xdop berahi lagi nop pi make binate laut las. sibuk do'oh las ni.

haru. nop pi setting keter xdop masa pong.

las ni nop cari tmpt praktikal kat Kay Ell. bleh TT lalu!

 

[sloth]

Kuala Kerteh. Masuk ikut small round-bout near Petronas Kerteh/MacD tuh.
Kuala Kemamang dok ade kedaiy makang, excpet for those kedai facing the Masjid Geliga. Those kedai also quite mahal. RM40 per kg siap masak for those binatang laut...flat rate.applied to all binatang laut.

Tapi the big taiko binatang ..udang quite mahal. RM100 per kg siap masak...but the freshness of those binatang laut arhhh.....hanya aku jer yang tahu!. kekeke

In fat, there got few kedai. Try to look the one near to the junction. Murah tuh!

ooo.. ok, ok.. not far from my house leh.. the one yg near to the T junction tuh, the big, standalone kedai or the one yang kat kedai sederet teres tuh?
huhuhuhu.. never really survey the price and quality of the foods here ler.. ngap sayot saja!

 

[USJ101]

EVO 9

Guys, nak mintak tolong/tanya

Im currently looking for internship places to do my practical training. Im currently a Mechanical Engineering Undergrad, Materials Engineering.

If anybody of you guys have any contacts with the Industry (doesnt matter what type, as long as its related to mechanical engineering), do let me know. I have a strong base in the field of coatings/corrosion protection. I will submit my resume upon request.

If your corporation/company/kilang has an opening for any trainees, please PM me or SMS me or email me.

I am in desperate need of a position, preferably around KL or Shah Alam.

Please send me a PM, thank you.

Desperate ni!!

Are you interested in Precision Metal Stamping Industry?
I can help you with....
Location? .. Balakong.. My workplace...

 

[aja]

ooo.. ok, ok.. not far from my house leh.. the one yg near to the T junction tuh, the big, standalone kedai or the one yang kat kedai sederet teres tuh?
huhuhuhu.. never really survey the price and quality of the foods here ler.. ngap sayot saja!

The corner one...sederet tuh. Never got a chance to try the one standalone at jetty LKIM tuh.

Better try and see!.

 

[bien335]

Are you interested in Precision Metal Stamping Industry?
I can help you with....
Location? .. Balakong.. My workplace...

woot! stamping. production. interesting!

Balakong? I'll give it a shot. Got elaun? :D

Im just firing at any opportunity here. Actually aiming for oil n gas.

I'll shoot a PM to you later.

 

[USJ101]

woot! stamping. production. interesting!

Balakong? I'll give it a shot. Got elaun? :D

Im just firing at any opportunity here. Actually aiming for oil n gas.

I'll shoot a PM to you later.

Aiyo brother,

oil n gas field where got applied coating/corrosion protection?

I am not 100% sure whether my Engineering dept still need any Practical training student or not, but you are keen, I will have a try.

 

[sloth]

sloth, xdop berahi lagi nop pi make binate laut las. sibuk do'oh las ni.

haru. nop pi setting keter xdop masa pong.

las ni nop cari tmpt praktikal kat Kay Ell. bleh TT lalu!

bien,

pekat sangat nih.. aku dok pahang setarang.. huhuhuhu

oil and gas come here la bro.. dok pung bintulu or miri.

 

[sloth]

Aiyo brother,

oil n gas field where got applied coating/corrosion protection?

I am not 100% sure whether my Engineering dept still need any Practical training student or not, but you are keen, I will have a try.

for O&G most prolly applicable for pipelines from offshore to land. so upstream sector leh..

 

[bien335]

ahh

quite the contrary, the oil n gas field applies various coatings on the pipelines.

nickel plating, chormium plating to stop corrosion in the pipes. corrosion protection is the key :D

yes, upstream. mung kerja mana sloth?

sloth, kalu dapat ar. las ni pun ramai org dh migrate ke KL. tganu pung tnggal Petronas jer. Exxonmobil (esso) dah xdop production/carigali las.

 

[USJ101]

ahh

quite the contrary, the oil n gas field applies various coatings on the pipelines.

nickel plating, chormium plating to stop corrosion in the pipes. corrosion protection is the key :D

yes, upstream. mung kerja mana sloth?

sloth, kalu dapat ar. las ni pun ramai org dh migrate ke KL. tganu pung tnggal Petronas jer. Exxonmobil (esso) dah xdop production/carigali las.

Now I understood.

 

[fobs]

maih coating keta keta aku kat sini,...
dun let it rust,...

 

[sloth]

ahh

quite the contrary, the oil n gas field applies various coatings on the pipelines.

nickel plating, chormium plating to stop corrosion in the pipes. corrosion protection is the key :D

yes, upstream. mung kerja mana sloth?

sloth, kalu dapat ar. las ni pun ramai org dh migrate ke KL. tganu pung tnggal Petronas jer. Exxonmobil (esso) dah xdop production/carigali las.

huhuhuhu.. aku keje downstream bien.. i deal with corrosion inhibition and protection too but more on chemicals treatment leh..

yup last few years back exxonmobil moved out from their main office here and now their terminal is about to be handed over to carigali.

come up here la.. sini got many E7/8/9 huhuhuhuhu..

 

[fobs]

huhuhuhu.. aku keje downstream bien.. i deal with corrosion inhibition and protection too but more on chemicals treatment leh..

yup last few years back exxonmobil moved out from their main office here and now their terminal is about to be handed over to carigali.

come up here la.. sini got many E7/8/9 huhuhuhuhu..

skarang mesia got E10 already or not???

 

[bulet]

EVO 9

Guys, nak mintak tolong/tanya

Im currently looking for internship places to do my practical training. Im currently a Mechanical Engineering Undergrad, Materials Engineering.

If anybody of you guys have any contacts with the Industry (doesnt matter what type, as long as its related to mechanical engineering), do let me know. I have a strong base in the field of coatings/corrosion protection. I will submit my resume upon request.

If your corporation/company/kilang has an opening for any trainees, please PM me or SMS me or email me.

I am in desperate need of a position, preferably around KL or Shah Alam.

Please send me a PM, thank you.

Desperate ni!!

my kilang took trainees from UPM last 6 months, u could try also if u want.... but for mechanical eng, not sure if they would take or not coz oredi ramai mecha eng guys here. but if u on electrical eng, i can recommend u on my dept hehehe... then we can go TT together geder lah, kelik kelate tugeder geder lah...

ade TT tak this friday?wanna give invitation kad to all my cf/cl bros here hehehe

 

[bulet]

maih coating keta keta aku kat sini,...
dun let it rust,...

can aa?have kawan2 price dop?

 

[aja]

huhuhuhu.. aku keje downstream bien.. i deal with corrosion inhibition and protection too but more on chemicals treatment leh..

yup last few years back exxonmobil moved out from their main office here and now their terminal is about to be handed over to carigali.

come up here la.. sini got many E7/8/9 huhuhuhuhu..

No wonder last CNY times got many Evos berkeliaran there. Earlier thought was there were a convoy ker etc.