Anyone tried this Engine oil before?

[vr2turbo]

Can buy directly from shops and dealers man.
So far ZTH users, assuming they are smart, all okay.
Rock oil, Kendall and all, all very good.

Petrol station should be the safest if scare of imitation....:rolleyes:

 

[Apache91120]

I doubt them too hehe!

 

[vr2turbo]

I doubt them too hehe!

Everyone like you then petrol station also close down.....hhahhahahha

So you import your petrol too.....

 

[Apache91120]

Hahaha!

 

[Izso]

*facepalm*

Anyway guys, if the dude has the budget to ship in oils that's his prerogative. Us poorer blokes will use locally available oils

 

[vr2turbo]

*facepalm*

Anyway guys, if the dude has the budget to ship in oils that's his prerogative. Us poorer blokes will use locally available oils

Yup, because is not like we cannot get them here. I remember years ago there was a ban on the import of brake pads to help our local market. I had to get a friend who works in SG to bring them in for me.....

 

[Enhanced Vehicle]

This BMW oil is made by Warren Distribution, Inc, USA, as private branding product.

The specification is as below:

Inspection Data
Specific Gravity @ 60°F (15.6°C) ASTM D4052 0.8517
Viscosity @ 40°C cSt ASTM D445 70.01
Viscosity @ 100°C cSt ASTM D445 12.02
Viscosity Index ASTM D2270 170
Pour Point °C (°F) ASTM D5950 -45°C (-49°F)
Color ASTM D 1500 2
Cold Cranking Simulator at (°C), cP ASTM D5293 5627 (-30)
High Temperature / High Shear Vis at 150°C, cP ASTM D5481 3.56
Pumping Viscosity at (°C), cP ASTM D4684 22,234 (-35)
Gravity, °API ASTM D287 34.64
TBN, mgKOH/g ASTM D 2896 8.0

BMW LL-04 approved

 

[ixeo]

This BMW oil is made by Warren Distribution, Inc, USA, as private branding product.

The specification is as below:

Inspection Data
Specific Gravity @ 60°F (15.6°C) ASTM D4052 0.8517
Viscosity @ 40°C cSt ASTM D445 70.01
Viscosity @ 100°C cSt ASTM D445 12.02
Viscosity Index ASTM D2270 170
Pour Point °C (°F) ASTM D5950 -45°C (-49°F)
Color ASTM D 1500 2
Cold Cranking Simulator at (°C), cP ASTM D5293 5627 (-30)
High Temperature / High Shear Vis at 150°C, cP ASTM D5481 3.56
Pumping Viscosity at (°C), cP ASTM D4684 22,234 (-35)
Gravity, °API ASTM D287 34.64
TBN, mgKOH/g ASTM D 2896 8.0

BMW LL-04 approved

They are the distributor. Its blended by Mag1 whoever that is.
Product Details - Mag 1

 

[Enhanced Vehicle]

They are the distributor. Its blended by Mag1 whoever that is.
Product Details - Mag 1

Yes, IXEO.