what is the BEST BOOST CONTROLLER ?

[jinkl]

What about Sard Trigger, i like the beeping sound when the boost reach it's peak, therefore i wont have to view the boost meter.

Greddy Profec is nice too, does the scramble boost button comes as a package?

Sum-dum-fuk : some says that tulang ikan may cause boost spike, is it true?

dont quite like sard trigger :P lol

nop, scramble button comes seperate, but u can make yourself one :P if i make for u rm100 lolx

 

[SDF]

sudut : yeap.. it spikes.

 

[pimpin323]

APEXI AVCR. best ever

 

[veilsideboyz]

ok Thankss ! but.. it look like hard to use it
any suggest more easily to control boost ?..

 

[Gtiiiii_01]

thomas from gt auto recommends me hks evc 5. but i personally prefer AVCR

 

[veilsideboyz]

it cost RM1200 right? if not mistaken......

 

[jinkl]

HKS EVC is good stuff too , but err do u really want to spend that much cash on a boost controller ?

if u dnt mind buying it, then its good :)
few things i dnt like about the EVC , errr HKS writer to further play with it ? u have it ? hehehe
bt in terms of accuracy its good, the selenoid has a built in MAP sensor which
enables better and smoother closed loop application. Blitz , Greddy, Sard & Turbosmart , they all read boost pressure from the engine by vacuum hose till dashboard. Only AVCR and HKS reads them electronically using a MAP sensor.

From DSMlink source, it states that, AVCR , TURBOSMART & GREDDY uses the same type of selenoid valves , they come from the same manufacturer, AVCR , TURBOSMART & GREDDY do not make selenoid valves. All 3 uses the same mechanism & 2 wire design.

 

[veilsideboyz]

ok ! thankss !!!!!!!!!!!!!!

 

[Gtiiiii_01]

that's a very gud explanation from the expert...

 

[jinkl]

ahak and those Draggers who want to use Trigger button on steering or etc

HKS EVC has it optional i tink around rm500
Greddy profec b also has it around rm450 bt can diy rm 5 ?
AVCR errr has it u just got to DIY normal switch rm5 ?

blitz DSBC ? i dont tink there is a trigger
about Turbosmart Dual Stage, there is a trigger comes with unit
about e-boost 2 has triggers too

but greddy is the most advanced trigger over here although its cheaper than the HKS cos its wireless

 

[zurinazwan]

TURBOSMART IS THE BEST 4 ME HAHAHAHAHAHA GO TURBOSMART

 

[Gtiiiii_01]

ahak and those Draggers who want to use Trigger button on steering or etc

HKS EVC has it optional i tink around rm500
Greddy profec b also has it around rm450 bt can diy rm 5 ?
AVCR errr has it u just got to DIY normal switch rm5 ?

blitz DSBC ? i dont tink there is a trigger
about Turbosmart Dual Stage, there is a trigger comes with unit
about e-boost 2 has triggers too

but greddy is the most advanced trigger over here although its cheaper than the HKS cos its wireless

i seriously hav no idea that it can be done by our self in such a simple way. i mean bout the trigger switch. it means that u can hav any design of the button that u want rite. correct me if i'm wrong.

 

[jinkl]

i seriously hav no idea that it can be done by our self in such a simple way. i mean bout the trigger switch. it means that u can hav any design of the button that u want rite. correct me if i'm wrong.

its just simple wiring
like greddy wiring, u jst need to ground a cable with momentary switch from jalan pasal to switch from low to high boost
avcr is the same , u just need to ground a cable to the white wire (if not mistaken) to enable scramble boost
turbosmart e-boost will have similar setup to just ground them

but so far i love the design of sparco scramble button :P , can buy from N1

 

[veilsideboyz]

TURBOSMART IS THE BEST 4 ME HAHAHAHAHAHA GO TURBOSMART

nowaday ppl using electric boost controller ad :proud:

 

[renxun]

turbosmart e boost 2 price is cheaper than the evc5, around same price with avcr or might be cheaper than it and its also side by side with the blitz dual solenoid spec R if im not mistaken... im taking the 45psi version to do comparison.

for those who use manual boost controler. wanna do trigger button for scramble is superb easy... just loop a bypass frm your existing boost controller to the 4age aircond idle solenoid. wire a 12v signal to it and ground it via a switch positioned as u like. set your hi boost and there u go. hi low boost with kampung style trigger function

 

[veilsideboyz]

about the boost controller......
hard to learn...wiring ..blalalalala:stupid:

 

[goo_61t]

turboXS quad got 4 trigger switch,can be triggered by gear positioning sensor or just make 4 trigger switch trigger when ever u like or make it RPM based huhuhu gud for front wheel drive for traction issue

 

[Gtiiiii_01]

its just simple wiring
like greddy wiring, u jst need to ground a cable with momentary switch from jalan pasal to switch from low to high boost
avcr is the same , u just need to ground a cable to the white wire (if not mistaken) to enable scramble boost
turbosmart e-boost will have similar setup to just ground them

but so far i love the design of sparco scramble button :P , can buy from N1

ok thanx for the info. will try it soon...

 

[zurinazwan]

BAI BOOST CON CHAP AYAM BREND APE YG BEST EKKKKKK

 

[jinkl]

kesian goo nobody supporting his turboxs hehehehehe

Bump:

BAI BOOST CON CHAP AYAM BREND APE YG BEST EKKKKKK

http://www.e-kereta.com/v2/showproduct.php?product=31123&cat=500