upgrade brake caliper

[B8 Turbo]

brake upgrade for our cars

Please forgive me,

The ultimate upgrade is this :

http://www.cardomain.com/ride/254328/6

 

[B8 Turbo]

I used rx7 fc sumitomo 4 pot calipers on my 95 lynx before.. i had to put spacers for my rims. No problems...xcept i had to spend more money for brake pads.

It costed me more than a thousand. Parts are bracket for upgrade, spacer (custom machined), FC caliper, pads, & labor.

If I could go back in time to tell myself not to do it, I would. But then again, I wouldn't be able to experience what 4-pot feels like in my car.

I've driven a STI and their complete set of Brembo brake system is unmatched. Ultra sensitive and bite like hell!!

 

[freddy]

about brake, the best is to adopt vr4 brake or evo3 which can be put it in,then for the rear you can vr4 brake.
this mod is done and tested ,because my next door neighbour now still driving this tx3 with b8210 sitting on the engine hood with those brake upgrade....
dont use b8 -210 brake on your car, its not worth it,because b8 -210 brake is 5 lugs..... where you will get new set of rims, although braking is good, but still adopt vr4 and evo3 should be better then this .

 

[kfze]

HI guys,

Anyone can help me to determine what brand of brake pads available for lantis V6 calipers ?

 

[Khorne]

Stop Tech would be a good one to look at...
Dunno if it's the same as the B8 210 ones but I would recommend it...
You can get in touch with YSKhong Motorsports...
Same pads used in the FORD FOCUS Rally Car...
CHEERS