mazda 3 bk 2005-2009 mod for brake???

[heefmy]

i recently buy a mazda 3 bk sedan 1.6 auto

after i bought it, i only notice that the rear brake is drum!!! behind the drum got screw hole to install caliper. i wan to modify to disc. my car is 5 lug 114.3.

i know that mazda b8 210, mazda lantis v6 2.0 original is 5 lug. can fit?

how about he handbrake cable?

any mazda expert can recommand workshop for modify performance?

got any other choice? pls recommand.

mazda expert pls help.

 

[heefmy]

help pls

 

[samuelccy]

I've been asking this but seems like Mazda folks are not very helpful here ... ~~~ sad ...

 

[stupidcar]

I've been asking this but seems like Mazda folks are not very helpful here ... ~~~ sad ...

No Mazda owners here?

 

[heefmy]

I've been asking this but seems like Mazda folks are not very helpful here ... ~~~ sad ...

u also a mazda 3 onwer? now still driving this model?

---------- Post added at 12:23 AM ---------- 6 hour anti-bump limit - Previous post was at 12:22 AM ----------

No Mazda owners here?

i really hope mazda folks help help help!!!!

 

[Sportback]

wish to have a SUV Mazda CX5. Do the Spare part of it expensive ? For example absorber.....

 

[dream.tent]

I don't have Mazda 3.
But i think the question u have here is not a normal one for 99.9% of Mazda owners out here.

To mod a drum brake to disc is possible. Specially for the standard models which has both Drum and Disc.
Why not just go chop shop and ask if can chop a set of rear disc and put in your car? I'm sure the mounting make all Mazda 3 the same rite?

 

[heefmy]

I don't have Mazda 3.
But i think the question u have here is not a normal one for 99.9% of Mazda owners out here.

To mod a drum brake to disc is possible. Specially for the standard models which has both Drum and Disc.
Why not just go chop shop and ask if can chop a set of rear disc and put in your car? I'm sure the mounting make all Mazda 3 the same rite?

i can find full set of rx-7 four pot front, rear disc assemble but not sure can fit or not. but i cant find mazda 3 rear disc from half cut. coz very less halfcut from mazda. hehe

now i had put mazda rx-8 rim to my car. so i can upgrade to big disc or caliber. anyway the car not required 4 pot, drive by my gf only.

---------- Post added at 04:04 PM ---------- 6 hour anti-bump limit - Previous post was at 04:02 PM ----------

mazda owner pls help.

 

[Jonnip]

Hi. Probably can use a mps rear assembly as that is caliper. Would have to change the hand brake cables as well and probably have some custom brake hoses made up.
the master cylinder also must change but should be OK la...

 

[samuelccy]

u also a mazda 3 onwer? now still driving this model?

---------- Post added at 12:23 AM ---------- 6 hour anti-bump limit - Previous post was at 12:22 AM ----------



i really hope mazda folks help help help!!!!

sorry bro, didn't log in for very long time ... yes, my ride is a Mazda 3 h/b 2.0

 

[Kippo]

try to find Gen 1 Mazda 3 MPS rear disc brake. Or you can buy the after market disc brake for Gen 1