Project "Zombie"

[b310turbo]

if ur engine are standard stock, better stay same suspension.... no point maaaa... 4 speed some more..... just came back from kk, saw one SR20det powered datsun 120y full drag spec, hoosier tyres, 700 plus hp... damn gila man... worth spending at RM80k mannn....

 

[raceengine]

Engine transplant haven't done yet. Still looking for the new heart. Hoping fairuz would help in this department. Oh by the way my car came with 4 speed manual only. sob sob... :( . I think I'm gonna go titan but that have to come way later since budget is getting tighter and tighter expecially after the transplant. Lots of other things need to be done including interior work and wiring. Oh yea... I DIY installing my seats into the datto. Will post the pic soon. :P

 

[b310turbo]

yes, i'm sure gonna help u wan.... after 29th we go n check out the engine.... me also not sabar larrr.... damn itchy already.... hahahhaaa.....

 

[zyfull]

my datto was stok only..but need some suggestion not for the hi-end one..juz for nice ride..need less better compare wit stok..ehhe..but if i want to lowed the car..the stok one is ok or bumpy..cannot rojak one ka..neway thanx for info..n gud luck for the mod..i will cucuk both of u later..ehhe..

p/s:fairuz-aiya,y u didnt reply for the rim..aku tunggu ma..but it ok if u not interested wit the price..gonna catch u later..

 

[zyfull]

actually my g/b was 5speed..but jam oledi..it hard to find the same species..so now run on 4speed..the f/c was not goodla..80kmh oledi hi rev so minyak pun parah..how bout u raceengine..ur f/c for ur car ok..can u stok g/b put in mine..can rojak..maybe ur g/b much better coz ur car was 1.6 rite..so wut ur next mod..transplant engine wit wut type??4age,ca18,rb20 or sr20..be4 this i already ask for h/c ca18 only 2400 at sunway n 4age for 3800 in gombak..ehhe..juz for u info..

 

[sam1741]

me also...
'almost' stock one...
try to restore it
still many things to done... :(


raceengine : your dat using titan suspension?

 

[zyfull]

giv me 5 sam..we r da same stok..akaka..

 

[raceengine]

Originally posted by sam1741@Apr 21 2005, 12:40
raceengine : your dat using titan suspension?

[snapback]915878[/snapback]​

Not yet but surely going to be since it's nearly impossible to get good balance if we rojak the suspention. Since my using coil spring at all four then I think I'm going for TITAN. I used hotbits for my wira before it's very good but then u need to service it every six month because that's how long it'll last with my driving. (sakit). So gonna try TITANing my datto :P

 

[zyfull]

can we use or rojak wit cefiro,silvia,skyline or other suspension??anyone tried before??any opinion??

 

[b310turbo]

Originally posted by zyfull@Apr 21 2005, 08:37
my datto was stok only..but need some suggestion not for the hi-end one..juz for nice ride..need less better compare wit stok..ehhe..but if i want to lowed the car..the stok one is ok or bumpy..cannot rojak one ka..neway thanx for info..n gud luck for the mod..i will cucuk both of u later..ehhe..

p/s:fairuz-aiya,y u didnt reply for the rim..aku tunggu ma..but it ok if u not interested wit the price..gonna catch u later..

[snapback]915496[/snapback]​

ehhh.... aku kan dah sms kau pasal rim tuhh.... la biar betul bang, dah lama aku sms 016 kau kan???? sorrilah.... rim tu okay tapi takde X factor lahh... lagipun aku dah jumpa rim kat kk, aku bawak balik sini dalam bulan depan la kot......

 

[b310turbo]

Originally posted by zyfull@Apr 22 2005, 08:32
can we use or rojak wit cefiro,silvia,skyline or other suspension??anyone tried before??any opinion??

[snapback]917363[/snapback]​

front one can use s13 but the rear ones gotta use something similar to iswara.....

 

[raceengine]

Originally posted by b310turbo+Apr 22 2005, 17:25 -->
QUOTE(b310turbo @ Apr 22 2005, 17:25 )
--QuoteBegin-zyfull@Apr 21 2005, 08:37
my datto was stok only..but need some suggestion not for the hi-end one..juz for nice ride..need less better compare wit stok..ehhe..but if i want to lowed the car..the stok one is ok or bumpy..cannot rojak one ka..neway thanx for info..n gud luck for the mod..i will cucuk both of u later..ehhe..

p/s:fairuz-aiya,y u didnt reply for the rim..aku tunggu ma..but it ok if u not interested wit the price..gonna catch u later..

[snapback]915496[/snapback]​

ehhh.... aku kan dah sms kau pasal rim tuhh.... la biar betul bang, dah lama aku sms 016 kau kan???? sorrilah.... rim tu okay tapi takde X factor lahh... lagipun aku dah jumpa rim kat kk, aku bawak balik sini dalam bulan depan la kot......

[snapback]918908[/snapback]​

[/b][/quote]

Oh! Rim apakah itu? Can share with all of us? :ph34r:

 

[zyfull]

Originally posted by b310turbo+Apr 22 2005, 17:25 -->
QUOTE(b310turbo @ Apr 22 2005, 17:25 )
--QuoteBegin-zyfull@Apr 21 2005, 08:37
my datto was stok only..but need some suggestion not for the hi-end one..juz for nice ride..need less better compare wit stok..ehhe..but if i want to lowed the car..the stok one is ok or bumpy..cannot rojak one ka..neway thanx for info..n gud luck for the mod..i will cucuk both of u later..ehhe..

p/s:fairuz-aiya,y u didnt reply for the rim..aku tunggu ma..but it ok if u not interested wit the price..gonna catch u later..

[snapback]915496[/snapback]​

ehhh.... aku kan dah sms kau pasal rim tuhh.... la biar betul bang, dah lama aku sms 016 kau kan???? sorrilah.... rim tu okay tapi takde X factor lahh... lagipun aku dah jumpa rim kat kk, aku bawak balik sini dalam bulan depan la kot......

[snapback]918908[/snapback]​

[/b][/quote]

which one??u juz mention bout price jerkan..can nego or not..the last time i send u msg was that i say can nego more..then juz senyap..but its ok lor..past oledi..misunderstoodla..so sori fairuz..no hard feeling k..cheers :D

but now my question was same wit raceengine..wut is the rim wit X factor..ehhe..dun want to share ker..

guys how u modified to fit the large rim..rite now try to put 15' rim but the problem was offset..if put thick spacer pun tayar mesti terkeluarla..how fairuz n raceengine??if mod wit hi bajek,the rim will be sell..ahha..borink ma if only can use the mangkuk hayun rim only.. :lol:

 

[raceengine]

I used a 1 inch spacers to get them in. but mine offset is 36 at front and 33 at rear.

 

[zyfull]

Originally posted by raceengine@Apr 24 2005, 10:36
I used a 1 inch spacers to get them in. but mine offset is 36 at front and 33 at rear.

[snapback]922654[/snapback]​

its ok if like that..mine only about 25 infront..that the problem..rite now only can use the mangkuk rim one..i think fairuz model was same like me rite..how he can put the big rim? for front..:unsure:

 

[sam1741]

giv me 5 sam..we r da same stok..akaka..

hi 5 !~

anyway...
me also almost all stock..
but .. better suspension gives better handling mar.. :)
so.. thinking lor
dono what rojak suspension will fit..
probably i will try rear harder than front to giv more oversteer.. :D


anyway.. also thinking of upgrading brake pad...
any suggestion for 120y?



anyway.. here is link to share share
http://jaw.iinet.net.au/cars/120y/index.html
a person restore his datsun
something might can be reference..

 

[b310turbo]

its ok if like that..mine only about 25 infront..that the problem..rite now only can use the mangkuk rim one..i think fairuz model was same like me rite..how he can put the big rim? for front..:unsure:

no problem bro, mine is 17 inch X 7jj, my offset is 42 front n rear, no spacers!!! bodyworks need to do a bit lah......

 

[raceengine]

I need those spacers to clear mhy front absorbers and the rear suspention arms. I stretch my car's body a bit to clear the 16 x 8jj rear rims and tyres. front rims offset also doesn't match my car thus the spacers... but front only 16 x 7jj

 

[zyfull]

thanks guy..better for me to call fairuz know how to fit it..actually for front,need to replace other absorber..because the problem was the tyre already meet the spring..need to find other absorber that has high spring position..maybe can bring out first then bring it to halfcut to check the similar absorber..

 

[zyfull]

thanq dude..is't stanza one of datto model??there got stanza in malaysia..r u know about king brand because at datto club most of them use king spring..r there sell in malaysia?

raceengine:how do u stretch ur body?
sam:wut brand do u use now?asb n spring..front and rear..
fairuz:r u using the s13 n iswara asb..or already with adjustable??