problem evo3(with 4g67 block)--- video attch

[huakenny]

thanks bro danz....will try to search more info about the torque damper.....btw..im using standard clutch...ehehehe....

---------- Post added at 07:37 PM ---------- 6 hour anti-bump limit - Previous post was at 07:35 PM ----------




sure kenny...hehehe...i have the 4wd system at home but now im using 2wd setup....i think need to see u la kenny so u can give some help about my car problem....hehehe....

---------- Post added at 09:40 PM ---------- 6 hour anti-bump limit - Previous post was at 07:37 PM ----------

May i know where can i buy this torque damper for my wira evo engine?

dun need the torque dampener oso can...

pasang the 4wd if u wan, better...

2wd spinning only...its fun..but not fast...0-400mm at kolombong u eat smoke for sure if vs scoobie/evo unless ur 3rd gear damn kuat

 

[guest]

will do engine checking 2moro...haiya....feels like boost leak la.....when rev hi boost stayed at 0.7 for all gears...but 5th gear can only reach 140km/h...slowly up to 150km/h feels like fast gila dah.........haiya.....when when i free gear after reving rpm goes down to 100rpm(car feel car wanna stall)after down 100rpm..bounce back to 1k rpm...haiya.....is this bov leak?

 

[huakenny]

sms me if u wanna join us for yamcha tonight...hard to seek forummers suggestion here....

 

[guest]

Re: problem evo3(with 4g67 block)--- new video attch

went to work shop just now...problem still not solve...haiya....they tighthen my sheep dog bov...but still not solve....hais.....car only manage to go 140km/h......booost at all gear....feels like car super fast already but only clock 140km/h haiya...help2...video attach for 2nd problem.....urgent help....


boost leaking or BOV leaking?plz help - YouTube

 

[huakenny]

seems like the workshop doesnt do the jobs well....so many problems:hmmmm:

 

[LesleyAprotto]

ok...somehow my car began to make problem again....now car when start in idle...can hear "pop..pop"...sound from the exhaust and the car like wanna die trying to breath..when i start and drive the car..the car cannot go to high rpm...worse top speed only 120km/h(that also feels like the engine running about 180km/h already)....so i tot the problem maybe caused by bad spark plug...so i change the ori HKS spark plug to borch spark plug(new)...well bad idea...its getting worse then before.....b4 i bring to the mech...i wanna know what causing this problem....plze share....tq

engine spec: evo3 with 4g67 block,arp head screw, new piston ring and bearing(running around 1100km only, anything else is standard.....


wiraevo32.wmv - YouTube

Pls check the timing VALVE
Or Fuel pump
Or Air mask if theres one...

 

[guest]

ok guys...since school holiday had started...i manage to identify and solved my idling and power lose problem....for all this time....the ic pipe is already rusted and because of that the air escape from the rusted pipe and hose....so here is some of the pics...yahoo...power is now On boost!!!! yeahhhhhhhhhh....

rusted pipe and bad hose
http://img528.imageshack.us/img528/7332/20120816224013.jpg

Uploaded with ImageShack.us

ready to replace new hose(cheap hose rm20 only hahah)

http://img16.imageshack.us/img16/1114/20120817171609.jpg

Uploaded with ImageShack.us

http://img685.imageshack.us/img685/2345/20120817230201.jpg

Uploaded with ImageShack.us

 

[huakenny]

wa...ur piping still ori ya.....

 

[guest]

Yup still stock.thingkin changin to stel one.do contect me if u got place make ic stainless steel piping in kk cheap one hehe

 

[huakenny]

i got used hks full intercooler piping (to use with stock IC)if u r interested plz sms me la.......

 

[kimura kris]

walou ur enjin so teruk lol....so hard to check what is the problem so kelam-kebut lol ur enjin wayar ring