KELISA - Tuning

[BakKutT3h]

ooooooooh nooooooooooo HEEELP ................i dismantle my roof half way and some of the screw is tight like hell.....can't even my friend which is stronger than me..........how.....now dangling there dunno what can i do....any shop can help me loosen the screw oni ? scare them LAN C and say they cant loosen too....==

 

[kelisa6009]

ooooooooh nooooooooooo HEEELP ................i dismantle my roof half way and some of the screw is tight like hell.....can't even my friend which is stronger than me..........how.....now dangling there dunno what can i do....any shop can help me loosen the screw oni ? scare them LAN C and say they cant loosen too....==

use WD-40.....

the roof screw plastic wan right?

 

[lonewolf]

huh.. can't even buy Magnolia Magnum ICE cream lar

 

[BakKutT3h]

use WD-40.....

the roof screw plastic wan right?

okokk...thanks...gao dim soundproof already...hahah...hands so tired screwing in and out

 

[kelisa6009]

huh.. can't even buy Magnolia Magnum ICE cream lar

see meh......okoko..later i sure wan to test your ride

 

[kelisa6009]

okokk...thanks...gao dim soundproof already...hahah...hands so tired screwing in and out

taikor...all the screw is plastic wan or the normal steel wan?

got any photo to show us?

 

[lonewolf]

wah..dismantle roof ar..nice. so when u want to pass ya knowledge to us ar?

 

[kelisa6009]

yayyaya...how how?

let us know...if can i wan to do before i shift house

 

[Tohsan]

KM

when wanna put k3vet? i wait for u ya!

 

[kelisa6009]

taikor...no need to wait for me lar....will be long long long long long....


u can go ahead with ur upgrade.....

 

[lonewolf]

TOHsan now in K3VET virus as well..

 

[kelisa6009]

that a good virus leh....
continue with the virus.....

 

[BakKutT3h]

wah..dismantle roof ar..nice. so when u want to pass ya knowledge to us ar?

hahaha..............

what i do is

open screw at
1) front passenger and driver sunvisor ( after screw out, the other side is a clip, use something sharp and flat or i recommend 2 flat head screw driver to poke in to the small hole that u can see left and right)

2) then screw out the center car dome light ( got 3 screw, gold color)

3) screw from roof handle at 3 passenger side ( front and rear)

4) screw out 4 bolt nuts seat belt at driver, front passenger, rear passenger side (those nuts are cover by a plastic cover, just take it off very easy

5) tear down those rubber(u know which rubber right?), dismantle the front side panel, center panel and rear panel.

6) pull out 2 plastic clips after u took out left and right center seat belt panel

7) pull out 2 plastic clips after took out rear seat belt panel

8) pull out 3 clips on the roof at rear side

9) knock knock the roof, should be fall down if everything has taken out...hah

taikor...all the screw is plastic wan or the normal steel wan?

got any photo to show us?

all is steel screw yea........sorry ler...forgot take pic....

 

[Tohsan]

TOHsan now in K3VET virus as well..

i have problem to overtake 24 wheels lumber trucks, any better way to increase stock engine?

 

[kelisa6009]

hahaha..............

what i do is

open screw at
1) front passenger and driver sunvisor ( after screw out, the other side is a clip, use something sharp and flat or i recommend 2 flat head screw driver to poke in to the small hole that u can see left and right)

2) then screw out the center car dome light ( got 3 screw, gold color)

3) screw from roof handle at 3 passenger side ( front and rear)

4) screw out 4 bolt nuts seat belt at driver, front passenger, rear passenger side (those nuts are cover by a plastic cover, just take it off very easy

5) tear down those rubber(u know which rubber right?), dismantle the front side panel, center panel and rear panel.

6) pull out 2 plastic clips after u took out left and right center seat belt panel

7) pull out 2 plastic clips after took out rear seat belt panel

8) pull out 3 clips on the roof at rear side

9) knock knock the roof, should be fall down if everything has taken out...hah




all is steel screw yea........sorry ler...forgot take pic....

taikor....

we plan to do...can u come and help us?


lonewolf....u wan to do boh? use my house to do before i move

 

[kelisa6009]

i have problem to overtake 24 wheels lumber trucks, any better way to increase stock engine?

yes.....change engine......confirm can overtake them...

taikor...this raya u confirm going to PEnang?

 

[lonewolf]

KM, what u wan to stick?..bitumen or insuflex?

 

[Tohsan]

yes.....change engine......confirm can overtake them...

taikor...this raya u confirm going to PEnang?

maybe will be going to Kedah to go for prayer,not sure yet, are u going back to Penang?

 

[Tohsan]

Lonewolf taikor

sorry cannot help you on weekday, too busy,now my car also got lot of minor problems, today got mickey mouse sound from those engine belt somemore tiu!

 

[BV5015]

hi all....
long time no drop by lorrrrr.....