Help..!!(mate a sohc vtec head with a non-vtec sohc block)

[marty_friedman20]

hello guys..a couple of weeks before my friend borrowed my car..he drove from kl to melaka and cruising in the highway..on his way to melaka,the car's engine overheated bcoz of the radiator..it's leaking and all the water dried..

he didn't wait for the engine to cool down and directly pour water into the radiator and started the engine..and then..'gasket bakar'

the head of the engine is cracked..
now my engine have a new head and it is a sohc vtec..
oh..by the way..my current engine is sohc non-vtec 1.6 EFI..
the problem is..how can i make the vtec to function..

i've search on the net and i found this..

http://www.jdmuniverse.com/forums/showthread.php?t=32971

the write up shown on how to wire up the wire from the vtec solenoid to the OBD2 'ecu's..

for OBD1..how can this be done?
anyone have this experience?
and is there any places can do this wiring?
mu current mechanic didn't noe how...

and..1 more..what are the current code for sohc non-vtec ecu?p28 eh?

 

[marty_friedman20]

plz..all the sifu out there...

 

[evoX2]

i'd that in my previous engine. if not mistaken u need a sohc vtec ecu to run the vtec. later i'll check the ecu code for u, i still keep it at home :P

but frankly speaking, if u looking for performance, its no match for B-series. I been through this. sohc vtec convert to turbo than can play with B16A.

 

[crower75]

Marty Friedman's playing sucks when he left Megadeth that's for sure.......ehehe

 

[marty_friedman20]

mm..agreed wif that..

 

[marty_friedman20]

actually the reason i mate it is bcoz my actual head cracked..and i'm seeking for a new head..so i thought..what the heck juz mate it with the sohc vtec..and..then..is juz bcoz of the low budget i'm having to convert to b series..