eh bro.. give me your Gen2 lar.. haha!ethanphoon592 said:Drex, try and study the EMS 700 as well la..
Many thanks,... please could you inform me the signal of Crankshaft Position Sensor?CHAPTER ONE:
EMS 400 ECU pin out (terminal assignment)
Introduction: EMS 400 ECU from Siemens VDO has two sectors called ECU1 and ECU2, with 120 pin terminals in total. Only 45 are used for SVDO 4G13/15.
The following list shows the terminal assignment as:
Wire Color Code:
Bk = black
G = green
Y = yellow
R = red
W = white
L = light blue
Bl = blue
Disclaimer: information provided might not be 100% accurate. However, I spent 3 hours taking the ECU out for the Wire Color Code, and putting it back. Terminal Assignment is based on the official information gathered via undisclosable sources. Use this information at your own risk but please don't forget that you see this from Drex Chan first.
cground hasn't logged in a looooong time. Are you in KL? I can tell you where to find him in personMany thanks,... please could you inform me the signal of Crankshaft Position Sensor?