diy install mitsu dashboard

[over]

Hi guys...can anyone tell me how to diy dismantle wira dash and install mitsu dashboard??? how many screws??? where?? n one other thing...can we use oem blower with mitsu dashboard???

 

[simefly]

There are about 8-10 screws that mainly hold the dashboard, I cant really remember coz the last time i did it was almost 3 years ago.

This is how i did it. You look at the mitsu dashboard and find out how many brackets that can be joined to the body, It will be a direct blueprint with the wira's one. Remember, always remove the screws from inside then move outside(center towards left and right) and do the reverse when screw it on.

Yes you can use the same blower.

 

[over]

Yes you can use the same blower.

no need to mod??? anyways....steering,cdplayer,...aircond all must be unplugged first rite??

 

[simefly]

if i am not mistaken its plug and play... i used the blower that came with the dashboard.

Yes, you will need to remove alot of things first... basically the meter cluster and also the middle panel, otherwise you are not able to reach the screws...