Digital fuse.

[sentinal3_16]

I have accidently bought a digital fuse.It looks like below:

http://uk.pg.photos.yahoo.com/ph/jamesb3_16/album?.dir=/abe2

Where does this fuse connect to?Does this fuse replace the one from the battery to HU?Can i DIY it?

Thanks.

 

[Dique]

i believe this fuse is to connect ur power cable...yah, can diy...but not battery to Hu, i think is battery to ur amp....

 

[Xbox]

I have accidently bought a digital fuse.It looks like below:

http://uk.pg.photos.yahoo.com/ph/jamesb3_16/album?.dir=/abe2

Where does this fuse connect to?Does this fuse replace the one from the battery to HU?Can i DIY it?

Thanks.

Yeah for power from battery to Amp. Looks cool. How much did you buy it for?

 

[sentinal3_16]

well, bought it from lelong 2 months ago for rm128.I dont have an amp yet.So how?I still have a small old tube fuse from battery going to somewhere which im not sure since it goes inside dashboard.

So, isnt this fuse to replace the old tube i have?Correct me if im wrong.

 

[Dique]

yah, replace it, but wondering where ur power cable connect to?
but if da power cable is not using, no sense u put da digital fuse...

 

[sentinal3_16]

I dont know much about car audios.Dont the power cable with fuse from battery connect to the HU?This is what i was thinking when i bought the digital fuse.

If not ,where does the tube fuse which is in my car currently connects to?Can i remove it if it is only for amp?

 

[Dique]

u bought 2nd hand car ar? mayb da previous owner is into ICE, b4 sell his car, he take off all those amp n etc....jst left da cable....try to find where is da end of da cable, most probably at ur car boot or under ur seat....

 

[Bert]

the owner could have connected the HU to the battery.. I do that too... o check.. unplug the fuse and see if your HU turns on.

Also the fusebox you got is a high amp fuse.. usually 100A onwards. This is way too big for your HU... keep it for when you get an amp.

 

[sentinal3_16]

Thanks for the replies.Yes, the HU does not work when i unplug the fuse.So, if i use 2 amplifier;do i need to use 2 digital fuse or can use the single one i bought?

 

[Bert]

use 1 fuse with the correct rating and then use a distribution block to split the power t the 2 amps.