Item: Fuse Extension Cable for DIYers
Package includes: Wire itself and 1 piece of fuse with rating of your choice.
Price: Stated below of each fuse type
Warranty: Nil.
Dealing method: COD or Poslaju postage
Location of seller: Cheras or KLCC
Contact method/details: PM
Age of item: New
Note: Available fuse rating: 5A, 7.5A, 10A, 15A and 20A
Reason for sale: Trade
Fuse Type: ATO Fuse
Price: RM 16.00
Fuse Type: Mini Fuse
Price: RM 16.00
Fuse Type: Low-Profile Mini Fuse
Price: RM 20.00
How to use:
1. Identify the fuse you want to tap power source from.
2. Unplug the existing fuse and plug it into the 2nd row of the fuse extension (B).
3. Plug the desired fuse rating into the 1st row of the fuse extension (A).
4. Connect your devices such as DRL, etc to the red wire (positive) of the fuse extension.
5. Plug the fuse extension into the place where you unplug the existing fuse in step 2 above.
Note: You may need a device (such as multi-meter) to identify which female plug (after removal of fuse) is connected to the power source. Once identified, plug in the fuse extension according to the orientation shown in the diagram above.
Package includes: Wire itself and 1 piece of fuse with rating of your choice.
Price: Stated below of each fuse type
Warranty: Nil.
Dealing method: COD or Poslaju postage
Location of seller: Cheras or KLCC
Contact method/details: PM
Age of item: New
Note: Available fuse rating: 5A, 7.5A, 10A, 15A and 20A
Reason for sale: Trade
Fuse Type: ATO Fuse
Price: RM 16.00
Fuse Type: Mini Fuse
Price: RM 16.00
Fuse Type: Low-Profile Mini Fuse
Price: RM 20.00
How to use:
1. Identify the fuse you want to tap power source from.
2. Unplug the existing fuse and plug it into the 2nd row of the fuse extension (B).
3. Plug the desired fuse rating into the 1st row of the fuse extension (A).
4. Connect your devices such as DRL, etc to the red wire (positive) of the fuse extension.
5. Plug the fuse extension into the place where you unplug the existing fuse in step 2 above.
Note: You may need a device (such as multi-meter) to identify which female plug (after removal of fuse) is connected to the power source. Once identified, plug in the fuse extension according to the orientation shown in the diagram above.
