Build COROllA fOR StrEEt Performance

pcmoddingmy

1,000 RPM
Senior Member
Mar 23, 2006
1,147
101
1,663
www.pcmoddingmy.com
i did not agree with pcmoddingmy, how many people build their car and whack at track, (not many la...except people have extraordinary money) most of them whack at street (not busy area la...crazy)..people up hill to genting, bukit putus, bukit tinggi....bukit belacan...erkkk..he he he...most of them modded car for fun.

why they need some part that just more suitable to use at track/autocross, with that thing make ur car diff from others. don't say it can't drive on daily basis. it depend to owner i think larr...
Well its okay if we have different opinions, hey that's what makes every driver & ride unique. :driver:
Plus I didn't say you can't drive it on street lah bro...

The reason i think, ppl don't go to track nowadays is because the trackdays fee is quite expensive. So they rather whack their track spec-ed monsters on the street, which i think can be quite dangerous.

If trackdays are much cheaper say RM50 per session (in my dreams), I bet almost any auto-enthusiasts will rather test out their rides on a proper track where they can push the limit of their rides without worrying about safety issue or getting involved with the authorities or even worst risk of damaging their rides due to poor road condition on the public roads.
 

mh wong

500 RPM
Feb 14, 2012
952
159
543
Kuala Lumpur
no hope rm50.00 on track day.....i think even rm 150.00......u can see apek,,,uncle...makcik2...also go sepang......whack the corner.....:biggrin:
 

nappx

2,000 RPM
Senior Member
Thread starter
Sep 13, 2005
2,532
185
5,163
kLaNG-kEy_tEE
agreed with you my frend pcmoddingmy..i also want dream till wet if RM50.00 perentry.
 

pcmoddingmy

1,000 RPM
Senior Member
Mar 23, 2006
1,147
101
1,663
www.pcmoddingmy.com
Yeah... so back to the topic, I think some of us might accidentally without realizing have already made our rides as a semi track spec-ed machine. Come to think of it, track cars usually have very tight regulation compared to street cars in terms of engine modifications, weight and safety. So in some cases, it could be cheaper to build a track car compared to a fully modded street car.
 

mh wong

500 RPM
Feb 14, 2012
952
159
543
Kuala Lumpur
if im not mistaken,
gOV oledi pass in parliament new compount for speeding.......Lowest rm300.......till rm2000.....they want more money .....instead...of......impliment.....point minus like hong kong / n singapore........

---------- Post added at 05:26 PM ---------- 6 hour anti-bump limit - Previous post was at 05:25 PM ----------

better play corner.......compare to speeding on highway.....haha:smokin:
 

nappx

2,000 RPM
Senior Member
Thread starter
Sep 13, 2005
2,532
185
5,163
kLaNG-kEy_tEE
pcmoddingmy - street performance car...good looking exterior/interior (try to avoid attention from police/jpj or others) humble type. if got block must not get paper from bro police/jpj. not much sticker or club number, but internal all full with good stuff.. just my opinion..maybe diff with others...again..
 

pcmoddingmy

1,000 RPM
Senior Member
Mar 23, 2006
1,147
101
1,663
www.pcmoddingmy.com
Napie, from your description it sounds like "sleeper car" to me... hehehe
So far, your exhaust setup got kena kacau from Police/JPJ before?
 

nappx

2,000 RPM
Senior Member
Thread starter
Sep 13, 2005
2,532
185
5,163
kLaNG-kEy_tEE
So far if got block by police..only one time got stopped...immediatelly switch of engine...the officer just see front..rear and front...ask licence n advise to change exhaust...at same time got one honda...police wot the throattle...n i believe my sound is louder...maybe my car look stock...or toyota brand..if police more interested at honda i believe...

After that start car and slowly..jalan la..not rev at all...hahaha..

Got one night around 4.00am our convoy face police block...they just see licence only...not much interesting to my car...unker car...
 

D7zul

2,000 RPM
Senior Member
Feb 24, 2011
2,697
848
1,713
Shah Alam
yup.. nappx car is like a wolf in sheep's clothing

so, don't make him angry.. u won't like it if he's angry


---------- Post added at 09:23 AM ---------- 6 hour anti-bump limit - Previous post was at 09:22 AM ----------

:rofl::rofl::rofl:
 

nappx

2,000 RPM
Senior Member
Thread starter
Sep 13, 2005
2,532
185
5,163
kLaNG-kEy_tEE
yup.. nappx car is like a wolf in sheep's clothing

so, don't make him angry.. u won't like it if he's angry


---------- Post added at 09:23 AM ---------- 6 hour anti-bump limit - Previous post was at 09:22 AM ----------

:rofl::rofl::rofl:
dislike...dislike... :driver: :slug: :turtle::ridinghorse:
 

D7zul

2,000 RPM
Senior Member
Feb 24, 2011
2,697
848
1,713
Shah Alam
some thing to share..

"270 degrees duration: This would be a cam upgrade to either 270 or 272 on the intake with the VVT still intact and 270 to 280 on the exhaust. Running VVT with a pair of 270 degree cams with the right grind will lead to no power loss at all anywhere in the rev range, instead it will help with the mid range and also at the upper end of the rev range. Changing to a 280 degree grind on the exhaust side should in theory lift the power curve higher in the rev range, this 270/280 degree set should in theory be an excellent choice for most 20V owners."

source : SQ Engineering - Articles - 20v cams
 

j_l200s

Senior Member
Senior Member
Dec 16, 2004
338
74
3,028
Just referred to the Tariff Code book. Refer to HS code 8483.10.0000 it stated there Import Tax 5% and Sales Tax 10% for moving shafts (cam/crank). These taxes will be taxed according to your total invoice value which will include sales amount, freight charges and insurance of 1% of your sales amount. Let's say i buy something which the value is RM1000 after conversion from USD. Freight/shipping will be RM100 and the insurance value (which is compulsory imposed by our local customs) is RM10. So, your total invoice value would be RM1110.

Now come the taxing part. Import tax will come first hence RM1110 + 5% + 10% = RM1282.05
So your total tax is RM282.05

Now comes the cams. I'll take the max amount of USD750 including shipping. I'll take easier rate for conversion of 3. that will be RM2250.
Pls our customs insurance of 1% = RM2272.50
RM2272.50 + 5% + 10% = RM2624.75

So the amount of the taxes would be around RM374.75

In short, lower down the sales amount ;-)
My cams just came in and yes, i kena duty and tax as above... :rolleyes:
 

Jason Teow

From Facebook
Feb 6, 2011
1
5
503
www.facebook.com
i asked the shipper to lower the value (declared on US customs declaration form) to USD250 + USD68 (shipping charges). total duty and tax around RM151. Now my PORNCAM is sleeping beside me. lol

the best part is this when i went to collect the cams:
customs officer : lain kali jangan buh nilai yang terlalu tinggi. mintak shipper declare USD10 cukup! TAK ADA TAX!
me : takkan u orang tak check harga barang tu? internet pun dapat cari la...
customs officer : kalau nak "cantik" sikit, declare kurang daripada RM500.

which means item value + shipping/freight charges LESS than USD160. NEVER ask shipper to include any commercial invoice in your parcel/package.

cheers!
 

yeehau86

Moderator
Helmet Clan
Moderator
Feb 10, 2007
2,856
2,425
5,213
The best part is actually when you get 'ping-pong' around counter 2, counter 1, kastam, counter 6. It took me 2 hours to get my parcel out of the building.
 

Mr.Chaser

4,000 RPM
Senior Member
Jun 29, 2009
4,065
184
1,663
Johor
The best part is actually when you get 'ping-pong' around counter 2, counter 1, kastam, counter 6. It took me 2 hours to get my parcel out of the building.
Haha, u dun know meh, this is their favourite "Ping-pong style" mah:rofl: but good to hear tat as u still manage to get the parcel! u know wat i mean right :wink:
 
Last edited:

intrigue

Known Member
Senior Member
Jan 2, 2004
275
39
3,028
nappx... so anything done to your 1zzfe corolla or the 2zrfe/3zrfe?

---------- Post added at 07:44 PM ---------- 6 hour anti-bump limit - Previous post was at 07:42 PM ----------

i asked the shipper to lower the value (declared on US customs declaration form) to USD250 + USD68 (shipping charges). total duty and tax around RM151. Now my PORNCAM is sleeping beside me. lol

the best part is this when i went to collect the cams:
customs officer : lain kali jangan buh nilai yang terlalu tinggi. mintak shipper declare USD10 cukup! TAK ADA TAX!
me : takkan u orang tak check harga barang tu? internet pun dapat cari la...
customs officer : kalau nak "cantik" sikit, declare kurang daripada RM500.

which means item value + shipping/freight charges LESS than USD160. NEVER ask shipper to include any commercial invoice in your parcel/package.

cheers!
quick check... normally shipping, will it reach us ah? Scare MIA while enroute to us
 

nappx

2,000 RPM
Senior Member
Thread starter
Sep 13, 2005
2,532
185
5,163
kLaNG-kEy_tEE
3ZRfE - keep stock since no aftermarket part available except throattle controller, but i think no need lah..just drop in filter from PIPERCROSS.

Just give prority for AE111/AE92 with bt Engine.
AE111 - reach final stage already, few thing on setting and think how to reduce car weight.
AE92 - engine in progress including searching part to improve handling
 

j_l200s

Senior Member
Senior Member
Dec 16, 2004
338
74
3,028
quick check... normally shipping, will it reach us ah? Scare MIA while enroute to us
So far i got no problem at all shopping online in the US. Ask for a registered post/parcel to be safe. They are a very reputable and honest sellers (so far i've seen la) not like here in malaysia... too many conmans.:banghead:

Anything above RM500 will not "reach" u but it'll be "safeguarded" by the customs in the post office. Go there declare, pay tax and cabut. :driver:
 

Random Post Every 5 Minutes

Hi guys :D ,
Anyone know is that universal air filter like K&N or APexi (Open-Pod) can match with the carburetor engine? for your information, im driving wira 1.5 stock engine. Thanks for the suggestion. B)
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience