mods on Accord CF4

[bien335]

bontot torneo

 

[Sato]

Guys, my car in deep Sh*t la...

Mechanic fixed my car ECU, then found out the valve dah burnt....what it means ar ?

Got to open up the heart and see how bad it is ~

1st cylinder very bad compression ratio...2nd and 3nd still way low than normal....only 4th cylinder in good pressure.....duh....i nearly fainted hearing this la ~

Oh...by the way....my parts...dah goyang goyang arrived.....hehehee....

Later snap pic ~

 

[cat77]

Guys, my car in deep Sh*t la...

Mechanic fixed my car ECU, then found out the valve dah burnt....what it means ar ?

Got to open up the heart and see how bad it is ~

1st cylinder very bad compression ratio...2nd and 3nd still way low than normal....only 4th cylinder in good pressure.....duh....i nearly fainted hearing this la ~

Oh...by the way....my parts...dah goyang goyang arrived.....hehehee....

Later snap pic ~

time for a new heart..........

 

[Sato]

New heart need to wait la....i'm really broke ~

Got to see how bad the engine is....

Ok...my parts...

Now i wonder.....how come my shox is written "ACTIVE" instead of "ARAGOSTA" ?

 

[alwhitesat]

wow! nice stuff!!

but at the price of the header u might instead buy h23a halfcut for your car!!

 

[cat77]

wow! nice stuff!!

but at the price of the header u might instead buy h23a halfcut for your car!!

of course maaaa........still hot direct from jepong.........made in japan maaaaa.......

 

[Sato]

Still hot from jepung....hahhaa....but when i touched it ar....so cold already....not as light as expected ~

Anyway...let say i wanna change heart.....how much am i expecting ar ?

 

[cat77]

Still hot from jepung....hahhaa....but when i touched it ar....so cold already....not as light as expected ~

Anyway...let say i wanna change heart.....how much am i expecting ar ?

12k to 15k i guess........depend how cheap half cut you can get.......nowsday euro r half cut price between 9k to 12k.......

 

[alwhitesat]

12k to 15k i guess........depend how cheap half cut you can get.......nowsday euro r half cut price between 9k to 12k.......

woaaa bro, u mark up lebih nampak

 

[Sato]

Wua...dun freak me out la....euro r need that 15k ke ???

I mean...engine + trans + all the needs....15k seems really not affordable ~

I thought 8k also expensive for me already ~

 

[pyang8018]

that stuff need new heart wooo...tomorrow price for petrol,sugar n natural gas NAIK!!!!

---------- Post added at 11:29 PM ---------- 6 hour anti-bump limit - Previous post was at 11:22 PM ----------

that stuff need new heart wooo...tomorrow price for petrol,sugar n natural gas NAIK!!!!

 

[Sato]

I wonder where fairy bro is ?

Need to ask him how much he transformed his car.....

 

[cat77]

Wua...dun freak me out la....euro r need that 15k ke ???

I mean...engine + trans + all the needs....15k seems really not affordable ~

I thought 8k also expensive for me already ~

8k ka????........last time fairy bought euro half cut cost 9k without bodypart.......labour cost is around 1.5k to 2.0k........timing belt set + water pump + other around 1k to 1.2k.........flushing gearbox around 400 to 700.......so you do the calculation......normally i will standby extra if i planned to do some conversion or modification......if got extra then can but other performance parts.....but if short......pening la......kekekeke.......and the other thing that i learn doing marketing is......if u quoted more than the customer should pay......the customer will happy......but if u qouted short.....then perang besar....... so mr sato......if u budget 15k for the conversion but the actual cost is 12k......i think u happy rite?????......just my 0.0000005 sense........

 

[Sato]

8k ka????........last time fairy bought euro half cut cost 9k without bodypart.......labour cost is around 1.5k to 2.0k........timing belt set + water pump + other around 1k to 1.2k.........flushing gearbox around 400 to 700.......so you do the calculation......normally i will standby extra if i planned to do some conversion or modification......if got extra then can but other performance parts.....but if short......pening la......kekekeke.......and the other thing that i learn doing marketing is......if u quoted more than the customer should pay......the customer will happy......but if u qouted short.....then perang besar....... so mr sato......if u budget 15k for the conversion but the actual cost is 12k......i think u happy rite?????......just my 0.0000005 sense........

Hmm....thanks for the senses.....at least i know what range it goes....

So...i dun have that much money to do conversion....then what to do now ? Have to put my car to sleep at my mechanic's place la....wait till i got enough money ! Hehehe...

Hey bro cat77.....boleh loan ke ? Hehehee

My mechanic said the rod ar....i forgot what it called....the high and low that push the valve i think ?.....got scratches la....he suspect the engine oil pump not in good shape...

Then dunno what arm got free play..... i really wonder how much to fix the engine.....

 

[aja]

Hmm....thanks for the senses.....at least i know what range it goes....

So...i dun have that much money to do conversion....then what to do now ? Have to put my car to sleep at my mechanic's place la....wait till i got enough money ! Hehehe...

Hey bro cat77.....boleh loan ke ? Hehehee

My mechanic said the rod ar....i forgot what it called....the high and low that push the valve i think ?.....got scratches la....he suspect the engine oil pump not in good shape...

Then dunno what arm got free play..... i really wonder how much to fix the engine.....

Sato, buy the Engine Kosong (tanpa Gula) would be better.

 

[alwhitesat]

hey pyang, kereta amacam??? sudah settle ka??

 

[pyang8018]

hey pyang, kereta amacam??? sudah settle ka??

roger..oredi settle..1st inspection..rear screen tinted lepas...but 2nd inspection front & rear x lepas pulak..so koyak dpn dia..then lepas..rear brake OK...

sato...i got enjin kosong F20B..mau ker???hehe

 

[aja]

roger..oredi settle..1st inspection..rear screen tinted lepas...but 2nd inspection front & rear x lepas pulak..so koyak dpn dia..then lepas..rear brake OK...

sato...i got enjin kosong F20B..mau ker???hehe

Kete Pyang dah power doh ler nih!! hehehehe

Pyang, better get runner to do for the brake tuh. Selesai....(based on my experience on Detamaso)

 

[Sato]

roger..oredi settle..1st inspection..rear screen tinted lepas...but 2nd inspection front & rear x lepas pulak..so koyak dpn dia..then lepas..rear brake OK...

sato...i got enjin kosong F20B..mau ker???hehe

What it means by enjin kosong ? What's inside then ? Sorry...really no mechanical sense at all....

 

[pyang8018]

Kete Pyang dah power doh ler nih!! hehehehe

Pyang, better get runner to do for the brake tuh. Selesai....(based on my experience on Detamaso)

power but cannot lawan H22AR/CL7...hehehe...

for Puspakom dah settle dah..try ask member..."masuk 2 kali puspakom..mesti leh settle bang"..just service brake kits & replace bendix pad..

alwi....at Trg oso got one CF4 turbo..rear torneo front cf4..TA. 491...dont know that owner..

bro sato...enjin kosong tu complete block & head w/o gearbox...but if u want...i give speacial price..can sell separately that part..

---------- Post added at 03:17 AM ---------- 6 hour anti-bump limit - Previous post was at 03:08 AM ----------

abe2 otai2...betul x definisi enjin kosong???adik minta tolong....:help::help: