The 4agze Forum

[Adeen]

ya la...must wait for bro nnik/bro nappx to get another tt planned....

 

[speedcrave]

Hi, been driving ae1014agze for 5 years in SEG 92 model.....long time not active in this forum.....anyway would like to join tt if there is one.....

 

[zaidi seg]

alooo 4agze owner
nak tanye nie ader barang² aftermarket yang memurah tak :-)

 

[caleb_5375]

wow...semakin banyak charger kaki here liao nice nice way to go charger kaki...
can consider do a 4 throttle gang also ...sure alot ....
kidding lah...

 

[Adeen]

barang aftermarket ape yg bleh dpt murah bro...??hehehe...
tnye levin30 aka charger paling kuat tu....kekee....
die duk cari extractor 4-2-1 tu...

 

[LEVIN30]

Bertuah nak dapat brg aftermarket 4agze yg murah,
extractor cusco ball 4-1 (used),price=rm850.
4-2-1 HKS-Jasma (used) =rm1200
Cable Plug performance=susah dapat!
sakit kepala!
so,maintain standard je la,itu pun,not easy!

 

[akugom]

levin30 getti'n angry!!!
kita makin pupus..............

 

[Adeen]

tu la...man charger dh pening kepala la....
hehehe....biar je la stended gini je la....
stended badak...!!

 

[toyota03]

Bertuah nak dapat brg aftermarket 4agze yg murah,
extractor cusco ball 4-1 (used),price=rm850.
4-2-1 HKS-Jasma (used) =rm1200
Cable Plug performance=susah dapat!
sakit kepala!
so,maintain standard je la,itu pun,not easy!

The cusco ball 4-1 extractor not much of used unless u modified quite a lot and pump more rpm. Besides that, u need a very light car..Have u put it in ur car yet?? I believe u will take away lotsa torque and u wont feel the pulling here..

The 4-2-1 should be good to go together with smaller pulley mod and boast to 1.2. Cable plug so so only. Just make sure u get a brand new original denso plug. Platinium or Iridium is good with factory recommended heat range unless u mod until ur car 220hp and above..

As for the fan on top of the i/c is not use larrr... U want the fan to suck air out or to blow air in? To suck air out, u will suck the heat generate by the engine as well and u might have negative effect..To blow air in, it is going to contradict as well..

The best MOD in s/c is to front mount the i/c. Get a normal 1G i/c at maybe 100-200 then mod is in front...Normal piping is good to go and no need stainless steel unless u r loaded.. Workmanship should be around 400-500 if i am not mistaken..
Some even mod water jet to spray and it helps a lot as well.
As for the laggin if u front mount is not noticeable at all. If for turbo, yes, u will notice some lagging but sc/ no prob and this is fun about it. Ping and knocking will improve coz the air is colder compare to top mount.

U will feel very very very much diff and the pulling is great compare to top mount ic. Sunny day with outside temp about 35 deg, u will able to get about 40-42 deg at the air intake after front mount i/c. Try to get the top mount temp and u will know what i mean.

I wish i remember every single thing so I can give some opinion here. I have gone through the hard way last time coz hardly ppl play with sc..However, still miss my sc and i sold it to some nice gentlement in Nilai..

my 2 cents

:)

 

[7Heaven]

Bertuah nak dapat brg aftermarket 4agze yg murah,
extractor cusco ball 4-1 (used),price=rm850.
4-2-1 HKS-Jasma (used) =rm1200
Cable Plug performance=susah dapat!
sakit kepala!
so,maintain standard je la,itu pun,not easy!

cable plug tu tak susah cari, just u tak ngam with mine only, if not u already using the splitfire cable
so weird with ur car, why cant use huh? last time i blh pki... ish ish ish got ghost kot
hmm....:hmmmm: next time must have a look to ur engine

 

[caleb_5375]

izzit the plug cable end wit connect to the distributor cap tak ngam or the distributor cap different from bro 7 one....can change the distributor from chop shop to settle rite

 

[trueno101]

waaa... dunno that there is a special 4agze tread here...
i'm Azhar from AU2, Keramat, ae101 4agze stock with trueno facelift...
dunno Adeen from Keramat also... lama tak masuk forum ni, apa citer?

~please info some list of halfcut shop in KL/any area that have 4agze stuff
or enjin lantai... maybe can help out some of our gang...

~peace...

 

[7Heaven]

izzit the plug cable end wit connect to the distributor cap tak ngam or the distributor cap different from bro 7 one....can change the distributor from chop shop to settle rite

yup his distributor not same as mine, so he return back the cable for me already.....

 

[trueno101]

yup his distributor not same as mine, so he return back the cable for me already.....

ae92 & ae101 stuff are different for certain parts...

 

[Adeen]

waaa... dunno that there is a special 4agze tread here...
i'm Azhar from AU2, Keramat, ae101 4agze stock with trueno facelift...
dunno Adeen from Keramat also... lama tak masuk forum ni, apa citer?

~please info some list of halfcut shop in KL/any area that have 4agze stuff
or enjin lantai... maybe can help out some of our gang...

~peace...

seen sum ae101 before in keremat....dunno la u or not...
sumtimes i do go to wangsa maju lepak carrefour play games...hehee...

 

[Adeen]

link to the tt esok hari...

http://www.zerotohundred.com/newfor...0-30-gl-le-se-seg101-seg111-gathering-25.html

 

[LEVIN30]

sorry la bro 7,i may have to change my dist. if i still want to use your
plug cable,

 

[7Heaven]

ae92 & ae101 stuff are different for certain parts...

oh mean Levin30's charger is AE101 one lo, coz last time i used it on AE92 2nd gen model....

 

[7Heaven]

sorry la bro 7,i may have to change my dist. if i still want to use your
plug cable,

never mind, if u got change the distributor then u let me know lo, i sell to u pulak kakkaka

 

[caleb_5375]

actually wat is the different between MSD and distributor....i not gud at performance parts...any one can teach me ...i know MSD is for spark ...amplifly the spark rite??