Stock Block 4G63T Rebuild

[Mistaken_Identity]

RM6500 for 4G63 Block,Pistons,Rods,ACL Engine/Rod Bearing,Crank,ARP Head Stud and including Engineering work.(only Block assemble) maybe u can get the lower price in sunway shop.try the best.

Bump: RM6500 for 4G63 Block,Pistons,Rods,ACL Engine/Rod Bearing,Crank,ARP Head Stud and including Engineering work.(only Block assemble) maybe u can get the lower price in sunway shop.try the best.

The price INCLUSIVE of the 4G63 BLOCK..???

 

[Havok_KiD]

bro what if i have a evo3 block and u do it in that block..the cost still same??

 

[3rd GearPerformance House]

My block is RM6500,Your block just pay RM5900.

 

[Mistaken_Identity]

My block is RM6500,Your block just pay RM5900.

Noted...Good bargain...Can get a good package price if included the MICROTECH package that U offer @ RM 3.8K..???

 

[3rd GearPerformance House]

i can give a good price for microtech if u buy my block pakage.give me PM or come to my wshop

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

 

[Trinityblood]

wah look at the offer dude...very interesting ler....

 

[jo1]

i can give a good price for microtech if u buy my block pakage.give me PM or come to my wshop

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

very tempting... plug and play

 

[Trinityblood]

huahua...yeah...the labor cost of assembling the block edi inclusive.

 

[sooso4e]

bro can you order for me this list or if you have this stuff how much the last price

Shortblock Includes: Hot tanked, bored / honed and painted block Cleaned and polished ,
ARP Head Studs, Upgrade to Oliver Rods , O-Ring Block Deck ,Full Race Machined Balance Shaft Eliminator,Knife Edged Crankshaft,2.3 Liter Stroker Kit,MLS Mitsubishi Head Gasket Upgrade,Water Pump Kit, Timing Belt & Tensioner Kit
give me the best price

Bump: bro can you order for me this list or if you have this stuff how much the last price

Shortblock Includes: Hot tanked, bored / honed and painted block Cleaned and polished ,
ARP Head Studs, Upgrade to Oliver Rods , O-Ring Block Deck ,Full Race Machined Balance Shaft Eliminator,Knife Edged Crankshaft,2.3 Liter Stroker Kit,MLS Mitsubishi Head Gasket Upgrade,Water Pump Kit, Timing Belt & Tensioner Kit
give me the best price

 

[che_deq]

sorry bro...what do u :hmmmm:mean 6 bolt and 7 bolt?i'm new b in this field la bro..

 

[Trinityblood]

i belive that there refering to the crankshaf...6 bolt is vr4 and 4g67 variant,
7 bolt is later version,like evo1-9...diesel crank aswell...

 

[rpm2racing]

Let him check for u and email him [email protected] may be he bz time

bro can you order for me this list or if you have this stuff how much the last price

Shortblock Includes: Hot tanked, bored / honed and painted block Cleaned and polished ,
ARP Head Studs, Upgrade to Oliver Rods , O-Ring Block Deck ,Full Race Machined Balance Shaft Eliminator,Knife Edged Crankshaft,2.3 Liter Stroker Kit,MLS Mitsubishi Head Gasket Upgrade,Water Pump Kit, Timing Belt & Tensioner Kit
give me the best price

Bump: bro can you order for me this list or if you have this stuff how much the last price

Shortblock Includes: Hot tanked, bored / honed and painted block Cleaned and polished ,
ARP Head Studs, Upgrade to Oliver Rods , O-Ring Block Deck ,Full Race Machined Balance Shaft Eliminator,Knife Edged Crankshaft,2.3 Liter Stroker Kit,MLS Mitsubishi Head Gasket Upgrade,Water Pump Kit, Timing Belt & Tensioner Kit
give me the best price

 

[owndferra]

i can give a good price for microtech if u buy my block pakage.give me PM or come to my wshop

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

Bump: This is a good OFFER ,U can't get out site there

1.Block 63 rebore 86mm
2.Head rebuild(no cam/pulley)
3.Mahle Pistons
4.Eagle Rods
5.ARP head stud
6.1.5mm Metal Gasket
7.Block and head Assemble
8.Microtech LT10s
9.X4 box
10.MSD coil plug set
11.Bosch Coils 4 pc

BEST Price RM 12k

for
1.Block 63 rebore 86mm...
if my block is 4g67 how much the cost?

 

[3rd GearPerformance House]

Same Price bro

 

[gIGoN]

contact num?

 

[3rd GearPerformance House]

3rs GearPerformance Racing
No 54 Jalan Perindustrian USJ 1/15
Subang Jaya
+60178320009

Bump: 3rs GearPerformance Racing
No 54 Jalan Perindustrian USJ 1/15
Subang Jaya
+60178320009

 

[trust_Wrx]

bro if ck chassis block? u do or not?
i dnt have the 63t CK block..
how? im using waja... huhu :(

Bump: bro if ck chassis block? u do or not?
i dnt have the 63t CK block..
how? im using waja... huhu :(