mods on Accord CF4

[amdfaisal]

best... for the time being... the deal with our customer not finalized yet... if yes maybe can belanja them buka puasa and i can eat syiok2 at the same time...

 

[Sato]

My office staff got his car stolen yesterday ! Hehehee...

78' toyota starlet still so high demand ar ? Hahahaa....but today police found it !

The thief took the tyres, changed them all to botak tyres....and took the battery !

Weird.....

---------- Post added at 04:58 PM ---------- Previous post was at 04:33 PM ----------

Guys, wanna ask ar

Engine mounting for CF4 same as CL1 ? How much would i expect if i wanna change ar ? Engine now shakes la....

 

[aja]

Aja, CAT77, AMD/INTEL Faisal & all KL CF4 ians....come today break fast at PJ Hilton!

Paya Serai kah?. Cannot afford ler....mahal.

---------- Post added at 07:54 PM ---------- Previous post was at 07:26 PM ----------

http://www.mudah.my/Honda-accord-cf4-euro-r-3822365.htm

Faizal,

It's Eric your friend car kah?. BTW, the "suspention" really pention la...hehehe

 

[fairy]

4k??? bro danny spent 1k+ to change bushes,... car feels like new again,...

err,... the vtec engine use ron95??? aiyo,... f20b and h22a spec i think say at least use ron99, but malaysia tarak,... so better if guna 97,... can add in some naftalena balls (ubat lipas, bulat bulat one) if you want.



f20b triptronic also can become super power if you modd kaw kaw,... this engine is made to rev,.... prannnnggggggggggggggggggggggggggg,...



siput = turbo

4k sebab i changed two brand new original upper arm almost 800 d, then fully serviced my four batang tein flex, replaced all bushes including front and rear, absorber link , tie rod end, anti roll bar bush, everything change d.. like that ma 4k lo.. thats what we call suspension system overhaul:proud:.. and also wallet overhaul...

last nite... i handed over my white knight to his new owner. we met at some shoplot area for the document handover, etc and then the guy sent me back home... man... as the car was leaving... the sight of a white torneo bontot at night with shining tail lights... damn... it was something special.

for the time being... i'm driving my brother's viva GTR and our new small car will arrive possibly next week. the plan now for me is to get another big car somewhere next year... what car? don't know yet... but if edddial is planning to sell his CF4 (to be converted to euro R very soon inside out) i will seriously consider har har har

aja... dyno shootout when? give me a call la... if i'm around i can join

---------- Post added at 10:24 AM ---------- Previous post was at 10:24 AM ----------

wandy... wan iswandy is better la because of that WAN title... royalty punye bau2 bacang wat...

poor white knight.. your owner abandon you after he lenjan you for a few years... kesian... hehehehehe :p

Hahahaa....New president ~

Probably still sticking to that devilish figures ? Time for our president to move forward.....CL7RR

Guys...i got a problem with the car now ar....see the rims still scratches the fender whenever the car is loaded to 4 person. I tried to stiffen the shox but still it will hit the fender.....should i go raise the shox ? Need to go kampung kampung with full load of ppl in the car, i don't think the car can handle the roads there...

bro sato, give me the size of your rims, tyre size and also brand..

---------- Post added at 08:03 AM ---------- Previous post was at 07:59 AM ----------

bro sato ah.. is it the rear left fender ???

 

[bulet]

My office staff got his car stolen yesterday ! Hehehee...
Engine mounting for CF4 same as CL1 ? How much would i expect if i wanna change ar ? Engine now shakes la....

mine shaking too....brapa harga?abang dollah pernah tukar kan?

4k sebab i changed two brand new original upper arm almost 800 d, then full

bro sato, give me the size of your rims, tyre size and also brand..

---------- Post added at 08:03 AM ---------- Previous post was at 07:59 AM ----------

bro sato ah.. is it the rear left fender ???

aik...same with mine also...rear left kena sangat. this raya holiday going back kelantan using CL1 stended rims hehehe

 

[Sato]

4k sebab i changed two brand new original upper arm almost 800 d, then fully serviced my four batang tein flex, replaced all bushes including front and rear, absorber link , tie rod end, anti roll bar bush, everything change d.. like that ma 4k lo.. thats what we call suspension system overhaul:proud:.. and also wallet overhaul...



poor white knight.. your owner abandon you after he lenjan you for a few years... kesian... hehehehehe :p


bro sato, give me the size of your rims, tyre size and also brand..

---------- Post added at 08:03 AM ---------- Previous post was at 07:59 AM ----------

bro sato ah.. is it the rear left fender ???

My rims size ar...17x7 114.5 offset +43 4 lugs

Tyre size 215/45/ brand yoko S drive ~

Not really juz hit rear left side la....it hits both end and also sometimes front ! Last time when i use Bridgestone My01....no problem at all....

I juz wonder....can i ask the tyre shop to set some camber ar ? Without adjusting the height of the shox ? So if degree of V more....the less chance it hits the fender rite ?

 

[aja]

Guys,

Now Exceptional Auto Parts had move to S. Alam...somewhere along Jalan Pendidik Glenmarie.

At least no need to go to LHS fro now on. Jauh beb!!

 

[bulet]

Guys,

Now Exceptional Auto Parts had move to S. Alam...somewhere along Jalan Pendidik Glenmarie.

At least no need to go to LHS fro now on. Jauh beb!!

both jauh for me hehehe........

today petang selisih with abang kucing77 at tmn connaught...tersengih sengih...lama tak jumpa. then saw abang fairy with beutiful white torrord (sorry forgot ur car name) infront of PGA camp, he look at me suspiciosly..when i tegur him..he buat donno jek ...ceit

 

[fairy]

mine shaking too....brapa harga?abang dollah pernah tukar kan?


aik...same with mine also...rear left kena sangat. this raya holiday going back kelantan using CL1 stended rims hehehe

i remember they were not too expensive.. the front one and right one is about seratus dua ratus lebih... but the rear is a bit more expensive and the 1 on the left with oil inside is about 500...

My rims size ar...17x7 114.5 offset +43 4 lugs

Tyre size 215/45/ brand yoko S drive ~

Not really juz hit rear left side la....it hits both end and also sometimes front ! Last time when i use Bridgestone My01....no problem at all....

I juz wonder....can i ask the tyre shop to set some camber ar ? Without adjusting the height of the shox ? So if degree of V more....the less chance it hits the fender rite ?

hahaha.. itu akibatnya pakai yoko tyres and lowered with +43 offset rims... i'm using 215/17/45 eagle f1, +42 rims and car lowered till half finger gap front and back.. the only 1 kacau was the rear left 1.. send it to your trusted mardgard lou and have him bend the insdes a little for you.. if u have euro arch lips then a balde will do the job... same for the front , but its a little trickier, once the sides a clear then you have to install the pisang back properly, if not tyre kena pisang the pisang very pain ooooo... hehe.. good luck bro :)

both jauh for me hehehe........

today petang selisih with abang kucing77 at tmn connaught...tersengih sengih...lama tak jumpa. then saw abang fairy with beutiful white torrord (sorry forgot ur car name) infront of PGA camp, he look at me suspiciosly..when i tegur him..he buat donno jek ...ceit

abang sayang bulet... mana i buat duno, i tak perasan :hmmmm:... but at that time i memang tengah banyak fikir.. sorry la bang, jgn marah.. nanti adik fairy jumpa abang i belanja abang ok :) jangan marah ye... sorry ye...

 

[bulet]

i remember they were not too expensive.. the front one and right one is about seratus dua ratus lebih... but the rear is a bit more expensive and the 1 on the left with oil inside is about 500...

the right one?..beside battery ke?my mounting on left side (near to ABS) sometimes shaking like hell.....

hahaha.. itu akibatnya pakai yoko tyres and lowered with +43 offset rims... i'm using 215/17/45 eagle f1, +42 rims and car lowered till half finger gap front and back.. the only 1 kacau was the rear left 1.. send it to your trusted mardgard lou and have him bend the insdes a little for you.. if u have euro arch lips then a balde will do the job... same for the front , but its a little trickier, once the sides a clear then you have to install the pisang back properly, if not tyre kena pisang the pisang very pain ooooo... hehe.. good luck bro :)

mine also 215/45/17 n +43 offset with falken tyres.....had tried to bengkok the rear fender but the problem is on the screw place between rear bumper n fender. that 1 cannot bengkok rite...tried also using spring damper, kurang la sket tyre kene body.....with the very low budget, what would u suggest to setel the prob?

abang sayang bulet... mana i buat duno, i tak perasan :hmmmm:... but at that time i memang tengah banyak fikir.. sorry la bang, jgn marah.. nanti adik fairy jumpa abang i belanja abang ok :) jangan marah ye... sorry ye...

hahah..no hal lah. saja seronok nampak kawan at my place...what were u doing there?

btw, ur car really cun lah

 

[edddial]

Guys,

Now Exceptional Auto Parts had move to S. Alam...somewhere along Jalan Pendidik Glenmarie.

At least no need to go to LHS fro now on. Jauh beb!!

Price better than LHS?

 

[amdfaisal]

price is exceptional oso la :)

---------- Post added at 11:06 AM ---------- Previous post was at 11:06 AM ----------

update... kedai midon in TTDI jaya... CF4 full car inside out pearl white RM2500

 

[Sato]

price is exceptional oso la :)

---------- Post added at 11:06 AM ---------- Previous post was at 11:06 AM ----------

update... kedai midon in TTDI jaya... CF4 full car inside out pearl white RM2500

Oii....dun understand la....what CF4 full car RM2500 ??? car model ar ?:stupid:

 

[amdfaisal]

hehe.... sori... this is for car repainting service. the info was intended for edddial since he is in the midst of pearl whiting his CF4 that is soon to be a CF4K

 

[John.]

2.5k for pearl white? super duper deal. my car is still in paint shop for taffeta white costing me more than 3k :( but kansai paint la.

anyway whats cf4k? sorry newbie here.

hehe.... sori... this is for car repainting service. the info was intended for edddial since he is in the midst of pearl whiting his CF4 that is soon to be a CF4K

 

[Sato]

hehe.... sori... this is for car repainting service. the info was intended for edddial since he is in the midst of pearl whiting his CF4 that is soon to be a CF4K

Icic.....ok..

I will be going to change the color also. But i'm still undecided la....whether to paint the inside also ! Scared once they open up everything, it might get loosen or broken bits of here and there....later ride become very annoyed with the sounds of loosen parts !

 

[cat77]

2.5k for pearl white? super duper deal. my car is still in paint shop for taffeta white costing me more than 3k :( but kansai paint la.

anyway whats cf4k? sorry newbie here.

cf4 kacuk....... or cf4 converted.....

 

[amdfaisal]

CFK... K for kahwin la... aja's dictionary

 

[fairy]

the right one?..beside battery ke?my mounting on left side (near to ABS) sometimes shaking like hell.....



mine also 215/45/17 n +43 offset with falken tyres.....had tried to bengkok the rear fender but the problem is on the screw place between rear bumper n fender. that 1 cannot bengkok rite...tried also using spring damper, kurang la sket tyre kene body.....with the very low budget, what would u suggest to setel the prob?



hahah..no hal lah. saja seronok nampak kawan at my place...what were u doing there?

btw, ur car really cun lah

abang bulet
the mounting next to abs is the expensive 1, dalam got minyak 1, just see whether got pecah or not.. if pecah you will see minyak inside..

the raba raba of tyre and body can settle with 20ringgit, send the car to my body shop at gombak, he will know what to do :) but you must allow him to raba raba your car.. hehe

i used to go there almost everyday for six years, sebab my ex gf stays there, i still go there to see my hairstylist .. hehe.. that day baru lepas potong rambut...

my car cun ah?? hehehe thank you thank you...

Icic.....ok..

I will be going to change the color also. But i'm still undecided la....whether to paint the inside also ! Scared once they open up everything, it might get loosen or broken bits of here and there....later ride become very annoyed with the sounds of loosen parts !

bro sato:wavey: biasa lah, after spray painting you will also find broken clips or missing clips... small small problem only.. the clips can buy back 1 ma... spray painting is like girls, at first when you first know them they are nice and quiet, after you LOOSEN them wahhhhhhhhhh.. banyak bising ohhhhhh.. so what happens is we make them bising while vtecking them, after that memang senyap and good girl.. hehehe

 

[cat77]

CFK... K for kahwin la... aja's dictionary

eh.....cilappppppppppppp......hehehehe