mods on Accord CF4

[fobs]

me like to cucuk tepi.....kekekekeke.....aka tepi ketiak......

pengsan,...

okok, tt with bertamboy besok petang,... in mentegaworth

 

[dzulx]

fairy san, for recon better sent to ah soon in pandan indah.....cheap n good.....where got i bully virgins.......virgins car more power than me maaaa.....

Is it advisable to recond rim if let say bengkok?

Got a PM for my car. Asking me my plate number and location.
Very very fishy.. What the heck they need my plate number for?

 

[fobs]

Is it advisable to recond rim if let say bengkok?

Got a PM for my car. Asking me my plate number and location.
Very very fishy.. What the heck they need my plate number for?

if rim is of durable type,... can "jack" it back,... if bengkok until reach bangkak,.. then cannot ler,...

"recond" as in fairy's question,... means to make the appearance like new,...
new paint,....

hmmm,..... on 4th thought,... dun sell lahhhh,...

 

[dzulx]

if rim is of durable type,... can "jack" it back,... if bengkok until reach bangkak,.. then cannot ler,...

"recond" as in fairy's question,... means to make the appearance like new,...
new paint,....

hmmm,..... on 4th thought,... dun sell lahhhh,...

Any rim repair shop can jack the thing back? but my concern is how bout the strength of the rim. Remain the same?

 

[amdfaisal]

ait... wak saiful... got backside problem kah???

TT tonite... i join hehe

selalunya saya, abg dolah and wak saiful je.......bulet and fairy want to join tak?????..... if tak, kita pun ok what......

 

[fobs]

Any rim repair shop can jack the thing back? but my concern is how bout the strength of the rim. Remain the same?

strength ah,..???
have to use ulbra pro 7.825 version b.0765 omega programme,... calculate using assumption of room temp and humidity and mercury pressure oxidating with sulfur content of 0.124697% + occurence of permanent amperage of 0.18ohms and using FEA (finite element analysis),... can get comparison,... sure,...

only certain shops can do,... they might even skim the rim at the hubcap area a bit to center balik,...

 

[ehsean]

2nite TT mana guys?

 

[BzboDi]

just came back from small tt with bro bzbodi.. he is quite a fun guy.. hehe

EHeh where got ?? no lahh u were the funnier guy.. thanks 4 the barang.. the only downside is when she got her new 'play toy'.. she buat tak layan jer wif me !!

 

[5efte]

selalunya saya, abg dolah and wak saiful je.......bulet and fairy want to join tak?????..... if tak, kita pun ok what......

OK, dont forget call me! Late TT......

 

[5efte]

Is it advisable to recond rim if let say bengkok?

Got a PM for my car. Asking me my plate number and location.
Very very fishy.. What the heck they need my plate number for?

Volks Racing CE28 ker? Tu Rim very soft and gentle bila nampak hole ....hehehe

 

[dzulx]

Volks Racing CE28 ker? Tu Rim very soft and gentle bila nampak hole ....hehehe

Thats why.. jadi guinea pig aku... langgar lubang bengkok.. You know Malaysia's road.. Blame sammy for that.

 

[fobs]

Thats why.. jadi guinea pig aku... langgar lubang bengkok.. You know Malaysia's road.. Blame sammy for that.

boleh,... depa akan jack skit skit,... kasik round bulat gedempol balik,...
aku tanya otai faroq,... dia kata boleh,... walaupun forged material,....

only enkei punya rim kekadang kedai tak mau buat,... senang patahhhhh

 

[fobs]

anybody can buy me a jepun number plate,...

with digits that i want???

 

[5efte]

Thats why.. jadi guinea pig aku... langgar lubang bengkok.. You know Malaysia's road.. Blame sammy for that.

Dear Dzul Chan,

Repair, skimming and balacing rim rm40/rim
Repaint rm40/rim
Kedai kat Pandan Indah

Normally foreman quoted to us is rm80/rim to repair

 

[Sato]

Dear Dzul Chan,

Repair, skimming and balacing rim rm40/rim
Repaint rm40/rim
Kedai kat Pandan Indah

Normally foreman quoted to us is rm80/rim to repair

Repaint RM40 ??? Ain't it's juz cheap ? The building materials for our projects on fencing and grilles using powder coated is quoted thousands and thousands of dollar wooo....

 

[fairy]

fairy san, for recon better sent to ah soon in pandan indah.....cheap n good.....where got i bully virgins.......virgins car more power than me maaaa.....

virgin no experience ma... hahaha

selalunya saya, abg dolah and wak saiful je.......bulet and fairy want to join tak?????..... if tak, kita pun ok what......

malam ni i have to pindah kedai.. its gonna be a longggg nite.. sigh..

hanif and his child dah 4 days not feeling well......maybe can't join us tonite...

sick ka?? serious ke??

Is it advisable to recond rim if let say bengkok?

Got a PM for my car. Asking me my plate number and location.
Very very fishy.. What the heck they need my plate number for?

its best to ask them for their contact number.. talk on the phone 1st.. if its ok then meet up.. but usually i will bring my parang along.. better safe than sorry... hehe

strength ah,..???
have to use ulbra pro 7.825 version b.0765 omega programme,... calculate using assumption of room temp and humidity and mercury pressure oxidating with sulfur content of 0.124697% + occurence of permanent amperage of 0.18ohms and using FEA (finite element analysis),... can get comparison,... sure,...

only certain shops can do,... they might even skim the rim at the hubcap area a bit to center balik,...

so deeppppppp.. tarak fahom.. me go to school chase girls so tak sempat belajar..

EHeh where got ?? no lahh u were the funnier guy.. thanks 4 the barang.. the only downside is when she got her new 'play toy'.. she buat tak layan jer wif me !!

you are most welcome bro.. dont worry, it happens to most ppl.. after that she will be playing with you again... hahahahahahhahahahahahaha

Dear Dzul Chan,

Repair, skimming and balacing rim rm40/rim
Repaint rm40/rim
Kedai kat Pandan Indah

Normally foreman quoted to us is rm80/rim to repair

wahhh.. cheap.. but will the paint tahan??

 

[sendai]

bulet bro,...

or any1,... pls help see if this rearskirt is for accord or torneo?

Yahoo!¥ª¡¼¥¯¥·¥ç¥ó - [UPJ=58299584]¥¢¥³¡¼¥É¥æ¡¼¥íR¡¦X(CL1)¥ê¥¢¥í¥¢¥¹¥«¡¼¥È¡ùJunk

cheap cheap ask someone buy and cut into three pieces and mail back or ask matki to hand-carry,... bro danny is in need of a rear skirt,...

This one still got no buyer..the seller set minimum price.If you bid 1 yen or 5 yen also,still cannot win..
Bought myself gear console panel carbon fiber and power window panel carbon fiber for each doors..total RM180..condition very good..taken from accord wagon CH9
CH9 also got lots of good cheap stuff..last time got my stabilizer bar from CH9..
Anyway,will be going back for holiday end of this August..If got TT that time,do inform me..maybe can meet and kenal2 with you guys..

 

[fobs]

This one still got no buyer..the seller set minimum price.If you bid 1 yen or 5 yen also,still cannot win..
Bought myself gear console panel carbon fiber and power window panel carbon fiber for each doors..total RM180..condition very good..taken from accord wagon CH9
CH9 also got lots of good cheap stuff..last time got my stabilizer bar from CH9..
Anyway,will be going back for holiday end of this August..If got TT that time,do inform me..maybe can meet and kenal2 with you guys..

bro sendai, min price 100yen? abt rm30++,...
u coming back,... sure got tt one lah these guyz, make sure u have the village head phone number, can liao.

if manage to buy this, u can carry back?

u bought the carbon fiber lookalike panels, nice!
my gear console one got scratches,... look look in auction also cant find a decent one,... that day got see one, but got burnt marks,...

 

[sendai]

bro sendai, min price 100yen? abt rm30++,...
u coming back,... sure got tt one lah these guyz, make sure u have the village head phone number, can liao.

if manage to buy this, u can carry back?

u bought the carbon fiber lookalike panels, nice!
my gear console one got scratches,... look look in auction also cant find a decent one,... that day got see one, but got burnt marks,...

Quite big lah bro..and maybe overweight already because I also bring other items..If small2,maybe can..no problem at all..

euro-R and accord wagon CH9 I think a bit difference the carbon fiber but both looks nice..sometimes I search for euro-R,CH9,CF4,CF6,CF7..
there is another one..only the gear console..start bid from 3000yen..

Now,instead of changing my car,maybe just find exterior for euro-r,adjustable absorber and then stop already..hehe..have to start saving some money because going back 2,3 years from now...

 

[fobs]

bro sendai,...

that lip wat minimum bid???

if success bought,... u potong it to a few pieces,... maybe 4 pieces,...
like this l _ _ l
then easy to carry,...
then balik here, my kawan will sambung balik,... ABS material, can sambung menyambung,...
i think abt 1.5 to 2kg only,...

juz tell me what the minimum price is,... i'll finalise with our bro danny,...