DIY - NVH Insulation and Tested Part 2

[cvkit17]

I would. But Autofoaming my car would cost 2k+. Later la.

If DIY? Well if they are using polyurethane foam, its easily available.

 

[Izso]

If DIY? Well if they are using polyurethane foam, its easily available.

I've heard horror stories about those foams.

 

[vr2turbo]

If DIY? Well if they are using polyurethane foam, its easily available.

DIY make sure no gap inside then water will collect.....

 

[cvkit17]

I've heard horror stories about those foams.

Post in hungry ghost thread hahahahah

Hmmm but 2k is expensive man

 

[vr2turbo]

Post in hungry ghost thread hahahahah

Hmmm but 2k is expensive man

Yah! full autofoam cost that much. Some do half or something like front part only then cheaper

 

[Allexking]

I did the same insulation with those Bituminous. Before you apply it, make sure the content is watering instead already harden. Hard to apply with paint brush if harden.

Last time, I washed my under carriage a day before start to apply it. That's to make sure the surface that wanted to apply is clean and dry before start to apply it.

Happy motoring