spray soap water on the surface....
n stick the sticker...
n stick the sticker...
Last edited:
DIY - decals -
- Thread starter partyJOE
- Start date
- Replies 90
- Views 10K
-
See what others are reading now! Try Forums > Current Activity
after adjusting the sticker...
let it dry awhile n remove the masking tape...
wallah ...finish...
save me 5bucks 4 dis sticker....
let it dry awhile n remove the masking tape...
wallah ...finish...
save me 5bucks 4 dis sticker....
I think I know how to do it. Actually normal A4 printer also can, it all depending on the size of sticker that you want actually. :D
Wahahhahahahaa, nice using the masking type. :D
I think the hardest part is the cutting.
Joe: You didn't use the steel ruler to cut? How did you cut so perfectly without making a single mistake?
For stickers like ADVAN, don't need good printer, you just need the outline to cut.
Wahahhahahahaa, nice using the masking type. :D
I think the hardest part is the cutting.
Joe: You didn't use the steel ruler to cut? How did you cut so perfectly without making a single mistake?
For stickers like ADVAN, don't need good printer, you just need the outline to cut.
simplythebest said:I think I know how to do it. Actually normal A4 printer also can, it all depending on the size of sticker that you want actually. :D
Wahahhahahahaa, nice using the masking type. :D
I think the hardest part is the cutting.
Joe: You didn't use the steel ruler to cut? How did you cut so perfectly without making a single mistake?
For stickers like ADVAN, don't need good printer, you just need the outline to cut.
ya u can even use A4 printers for small stickers ...
but i need a A3 for windscreen sticker cos dat was bigger...
so its adviseable to do simple logos for easier cutting...
'momo' is the easiest... cut it in 2mins only...
but again it all depends on how u cut them... just take yr time, it will all be fine...
happy trying.. it will be fun...
p/s... gonna use plotter for my next project.... waitup 4 'PROJECT BODY STRIP'..
good
good, i know how to do ald...thanks alot
good, i know how to do ald...thanks alot
partyJOE said:
Don't forget to post here after finishing the project ok. :D
I have a question, all the stickers you cut them following the outline only? Is there any tips? I doubt I can cut that consistent.
aiii
i salah cut lar......my lovely sticker gone liau....coz i was printing out the sticker of the brand call pipercross, ai...have to redo again, maybe other name lar.....
not free to diy now.....got project to do...
i salah cut lar......my lovely sticker gone liau....coz i was printing out the sticker of the brand call pipercross, ai...have to redo again, maybe other name lar.....
not free to diy now.....got project to do...
partyJOE said:
which brothers you bought it from?
what is the sticker called..? because i ask brothers in port klang.. they like damn
blur.. -.-"
stalkerrox said:
i bought at brothers batu caves..
this vynil stickers can get anywhr...
those sticker shops in pandan indah also...
more colors n choices...but abit far..malas...hehehe
partyJOE said:
okie =)
thanks bro.. :D
trxx said:
i din use any transparent sticker... i use normal black vynil sticker..
steps r as u c for d 'ADVAN' sticker...
ijoe said:
tq tq... looks real ha... i search 4 logo images in the net... print them out..
then draw back as exact as possible in computer... hehe ... if draw freeehand tak jadi 1..
maybe i'll brief mur on our next TT...(",)
hi all ZTH members.
i'm a newbie here, sila tunjuk ajar.
learnt a lot from other forum topic and got interested with this one.
before i proceed, i would like to say, joe, it's really awesome!
and thanx for providing the instruction here.
will try one myself one of these days.
still figuring what to print.
hehe
:)
i'm a newbie here, sila tunjuk ajar.
learnt a lot from other forum topic and got interested with this one.
before i proceed, i would like to say, joe, it's really awesome!
and thanx for providing the instruction here.
will try one myself one of these days.
still figuring what to print.
hehe
:)
bizkuzz said:
thx alot yo...
awesome!
i did tried b4.. but manually.. i cut the stickers bout roughly d size i wan.. juz say 8 by 3 inch.. then i stick masking tape, n start drawing n measuring... juz a 'momo' took me almost half n hour....huaaaa :frown: traditional way.... dats juz geometric shape... if organic like 'recaro'... haih so many tries n errors.. sumore look like pirated..end up tearing them of :thumpdown
Need abit of yr help la brother joe.. n haf 2 admit dat the NFSU is damn cun! simple n creative. how la u got the patience... i rememba last time, i bleed my fingers n had hand cramps..
So juz few questions:
- u knoe where can get the 'transparent' stickers? u knoe like u, u used masking tape 2 transfer yr finished vinyl 2 d car.. but usually custom stickers shop using this.. so dat can stick more accurately.. its like a thin sticky film.. veri hard 2 find those la.. more or less like food wrapping plastic dat wan..hope u get wat i mean
- bout printer, is it ok 2 use normal A4 printer? would d sticker 'crumple' abit since u r printing it the back of it.. cuz those stickers r been rolled frontwards from shops.
- haf u tried stick yr stickers in engine bay? heatproof tak? if not hafto go Tom's Stickers there buy liao.. mahal siot..
- And lastly wat software u used? Photoshop?
Cuz im actually tryin 2 do d same project like u...
if im not mistaken u r doin the dodge viper stripes style ryte i assume?
Where else im trying 2 do d side wan.. like Satria R3 but ade garis putus2.. from headlight 2 tail light hehe... :rolleyes:
flames n tribals r to complicated..so juz stick 2 simplicity
i did tried b4.. but manually.. i cut the stickers bout roughly d size i wan.. juz say 8 by 3 inch.. then i stick masking tape, n start drawing n measuring... juz a 'momo' took me almost half n hour....huaaaa :frown: traditional way.... dats juz geometric shape... if organic like 'recaro'... haih so many tries n errors.. sumore look like pirated..end up tearing them of :thumpdown
Need abit of yr help la brother joe.. n haf 2 admit dat the NFSU is damn cun! simple n creative. how la u got the patience... i rememba last time, i bleed my fingers n had hand cramps..
So juz few questions:
- u knoe where can get the 'transparent' stickers? u knoe like u, u used masking tape 2 transfer yr finished vinyl 2 d car.. but usually custom stickers shop using this.. so dat can stick more accurately.. its like a thin sticky film.. veri hard 2 find those la.. more or less like food wrapping plastic dat wan..hope u get wat i mean
- bout printer, is it ok 2 use normal A4 printer? would d sticker 'crumple' abit since u r printing it the back of it.. cuz those stickers r been rolled frontwards from shops.
- haf u tried stick yr stickers in engine bay? heatproof tak? if not hafto go Tom's Stickers there buy liao.. mahal siot..
- And lastly wat software u used? Photoshop?
Cuz im actually tryin 2 do d same project like u...
if im not mistaken u r doin the dodge viper stripes style ryte i assume?Where else im trying 2 do d side wan.. like Satria R3 but ade garis putus2.. from headlight 2 tail light hehe... :rolleyes:
flames n tribals r to complicated..so juz stick 2 simplicity
Last edited:
abeyus said:
use photoshop n mirror.
| Similar threads | |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Marketplace Latest
-
BMW F30 Bodykit/Tailpipe
- Started by jeff6126
- Exterior and Body
The Marketplace Top Posts
-
Top Secret Nissan R35 GTR GTR35
- Started by aycy
- Cars for sale
A thread every 60 seconds
Recent Posts
Search
Enjoying Zerotohundred?
Log-in for an ad-less experience