DC5 Advice

pics for sure its nt the real thing as the plate were in white. original shud be 17" n i think even its in the region of rm75k, its a type-s.

timmy,
i'll be goin penang this thursdae till sundae. wanna meet up for tea ? :biggrin:
 
stylites:

bro, anytime you're in penang , give me a call , i'll get all the DC5's out to come and give you a warm welcome!!! :biggrin:

whatcha doing in penang? work or business?

Bump: stylites:

bro, anytime you're in penang , give me a call , i'll get all the DC5's out to come and give you a warm welcome!!! :biggrin:

whatcha doing in penang? work or business?

Bump: Penang , if you go dyno at Northern Garage, it's a Dastek Dynamometer a.k.a. Super Happy Optimistic Dyno!

it measures at engine / crank ......... not on wheel.

i've seen some ridiculous figures on that dyno ............

one white dc5 , a3 cams , Intake, header, exhaust, = 250 to 260 hp easily!

makes you happy for a while :smokin:


for a real challenge, try Link's dyno ......... 4 rollers, that's a real load!
 
stylites:

bro, anytime you're in penang , give me a call , i'll get all the DC5's out to come and give you a warm welcome!!! :biggrin:

whatcha doing in penang? work or business?

Bump: stylites:

bro, anytime you're in penang , give me a call , i'll get all the DC5's out to come and give you a warm welcome!!! :biggrin:

whatcha doing in penang? work or business?

Bump: Penang , if you go dyno at Northern Garage, it's a Dastek Dynamometer a.k.a. Super Happy Optimistic Dyno!

it measures at engine / crank ......... not on wheel.

i've seen some ridiculous figures on that dyno ............

one white dc5 , a3 cams , Intake, header, exhaust, = 250 to 260 hp easily!

makes you happy for a while :smokin:


for a real challenge, try Link's dyno ......... 4 rollers, that's a real load!

i'll ring u up for tea then any good nightspots for booze :smokin:
my gf's frm penang so will be visiting her relatives n to visit a few frens of mine.
c u then :biggrin:
 
stylites:

bro, anytime you're in penang , give me a call , i'll get all the DC5's out to come and give you a warm welcome!!! :biggrin:

whatcha doing in penang? work or business?

Bump: stylites:

bro, anytime you're in penang , give me a call , i'll get all the DC5's out to come and give you a warm welcome!!! :biggrin:

whatcha doing in penang? work or business?

Bump: Penang , if you go dyno at Northern Garage, it's a Dastek Dynamometer a.k.a. Super Happy Optimistic Dyno!

it measures at engine / crank ......... not on wheel.

i've seen some ridiculous figures on that dyno ............

one white dc5 , a3 cams , Intake, header, exhaust, = 250 to 260 hp easily!

makes you happy for a while :smokin:


for a real challenge, try Link's dyno ......... 4 rollers, that's a real load!

dyno meter didnt have a real messurement yet..not like a kg or mm..got a real figaer.

at link also the same.even u dyno at gt or n1,or speedwork, some is on engine some is on wheel.

4 roller is for 2wheel or 4 wheel la...same story if u got a acam ,intake n exhast u dyno on wheel 230hp...that a same story on engine 250hp...they all just a cuculate a messurment...bro..n let we tune to the max.....:driver:
 
walauweii miri damn boring man. I eat ayam penyet + massage all day long..:sleep: tomorrow only start working.

what kind of massage bro?? b.a.t.i.n?? heh!heh!

Bump:
Hey guys....

Here... what do u guys reckon?? Fishy huh?

http://www.mudah.my/honda-integra-dc5-vtec-kuala-lumpur-1738761.htm?ca=8_s

RM75K?

TYPE - S perhaps?

Bump:
stylites:

a.k.a. Super Happy Optimistic Dyno!

hihihi! i like the name!
 
Last edited:
rev555:
mate, please, check your facts. Dynamometers measure power. power comes in a variety of units for measurement, BTU / hour (or minutes or seconds) , calories per time, HP (horsepower in either metric or electric) , Kilowatts , megawatts, etc.

the difference between these dyno's is where the measurements are taken , calibration, and correction settings.

and 4 roller doesn't mean 4 wheel dyno's mate :hmmmm:
it means that there is 4 rollers in series for a pair of parralel wheels , hence the term "load dyno".

Bump: .


Stylites:

as long as you bring your own women , it's ok, cause Penang is unfortunately very very short on women supply :biggrin:

we don't have many dc5's , but they're nice folks. except for me ! mauahahahahhah :biggrin:

Bump: .


Stylites:

as long as you bring your own women , it's ok, cause Penang is unfortunately very very short on women supply :biggrin:

we don't have many dc5's , but they're nice folks. except for me ! mauahahahahhah :biggrin:
 
pics for sure its nt the real thing as the plate were in white. original shud be 17" n i think even its in the region of rm75k, its a type-s.

timmy,
i'll be goin penang this thursdae till sundae. wanna meet up for tea ? :biggrin:

Very fishy.. even Type-S are still selling 100k to 120k and it mentioned only cash buyer for 04 still can get loan! I will try to contact the seller.. if really 75k i really interested buy 1 more.. hehehehe
 
out of topic from the rest of the thread (coz i've been so out of touch of the forum), have any of you tried hankook tires? s1 evo or something like that. I've recently put them on coz they're bloody cheap and they are surprisingly good. I can't really push them hard yet until the next track day. ;) for 300 bucks a pop, it's worth a try.

has anyone tried and has a different experience?
 
rev555:
mate, please, check your facts. Dynamometers measure power. power comes in a variety of units for measurement, BTU / hour (or minutes or seconds) , calories per time, HP (horsepower in either metric or electric) , Kilowatts , megawatts, etc.

the difference between these dyno's is where the measurements are taken , calibration, and correction settings.

and 4 roller doesn't mean 4 wheel dyno's mate :hmmmm:
it means that there is 4 rollers in series for a pair of parralel wheels , hence the term "load dyno".

Bump
Stylites:

as long as you bring your own women , it's ok, cause Penang is unfortunately very very short on women supply :biggrin:

we don't have many dc5's , but they're nice folks. except for me ! mauahahahahhah :biggrin:

Bump: .


Stylites:

as long as you bring your own women , it's ok, cause Penang is unfortunately very very short on women supply :biggrin:

we don't have many dc5's , but they're nice folks. except for me ! mauahahahahhah :biggrin:

ow..i see....thanks for the infor.....! what car u drive bro..?:driver:
 
Mr Vagabond here drives a soup up DC5R too Mr Rev ... :P
 
i wanna sell tein ha for dc5 anyone here inters ...? rm 2500 with pillow ball too...just been revavle..
 
heh heh ...... no lar ...........

up north here in Penang ......... nobody knows what an Integra or DC5 is .......

........ they call them Modified-2-door-Civics !

Bump: Actually Tein HA is now equivalent to Tein's which model?
super street? flex? monoflex? or super racing?

Bump: Actually Tein HA is now equivalent to Tein's which model?
super street? flex? monoflex? or super racing?
 
owh ... a modified 2 doors civic eh? ...

ahahhahah ... funny ...
 
tein ha is super street ......is twin tude....shock..i was change the new bearing n revavle the shock oledi.all in side is new....cos i order the new buddy clud racing spec damper arriv next week..just wanna to sell it...:driver:

Bump: tein ha is super street ......is twin tude....shock..i was change the new bearing n revavle the shock oledi.all in side is new....cos i order the new buddy clud racing spec damper arriv next week..just wanna to sell it...:driver:

Bump: does anyone know sepang drag race at april when...?

Bump: does anyone know when sepang drag race next month...?april...
 
Just wondering if the new civic can fit in our stock dc5 rims?

Got one potential buyer ... and who wants to sell their stock rims?

ehheehhe

Bump: Just wondering if the new civic can fit in our stock dc5 rims?

Got one potential buyer ... and who wants to sell their stock rims?

ehheehhe
 
Sepang Drag race was on next week 14/3/2009

new civic FD will Fit stock DC5 rim but the offset a bit deep in side
 
i have a set stock dc 5 rim ...the of set may be deep inside a bit but can add spacer ..should be no problem..rm2000.
 
woooo .. rev ... no hard feelings but rm2k is above the market price :)

I sell of mine recently and i would be lucky if i could sell it at your price :P
 
haha..no haeart feeling man.hahah..just try my luck weather can sell high price hihi:listen:

but if u selling on cheap price once u wanna buy back the rim it will dificult to find..hahaha.
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience