Custom-made roll-cages available for various applications!

[ninja_iga]

hi

it's been a whole year since we started our roll-cage program.
Since then, we've several Kancils roll-cages built and raced in the MSS SuperKompak series.
These cages are designed to be strong, stiff and comply with the rules and regulations of the race series, welded-on for best possible strength and safety.

Our roll-cages are:

• strong
• well designed
• well built
• fully welded joints
• designed with your safety in mind
• custom made to any race spec (please consult us on the possiblities)
• proper spec steel in sizes and material (ERW or CDS)
• applicable to just about any car (custom-made)

We also offer bolt-in designs, depending on application for various cars (trucks and 4WD are our recent projects)

Give us a call and find out more via a free-consultation service.
A cheap roll-cage can be easily done anywhere at any exhaust shop.
A properly designed cage will save your life, especially when you'd need it the most! (which is why you have one in the first place!)


Stanley
012-211-3039
UltraRacing

 

[proton63t]

Ninja,

How much would a rollcage costs for a regular sedan ?

 

[ninja_iga]

hi proton63t,

depends on your requirements.

A simple 6point, bolt-on without diagonal for street use may cost about RM900+
Add more bars, of course costs more.

Weld-in cages are cheaper simply because it's alot simpler and less material costs.

Please specify what's your requirements and for what use/event, we'll advise accordingly.

Stanley

 

[proton63t]

thanks stanley,

I have a sentimental oldjunk (saga), was my first car anyway, now the car feels so wobbly even in slow speed cornering. I just want to roll-cage it for normal street use and sometimes for some fast driving, thats all.

Car is 10yrs+- and engine is 4g15.

RM900 seems reasonable to me, what are your advises ?

Will the rollcage be very notieable from outside ? (wanna avoid roadblock all cost)

Regards

 

[calvin tong]

proton63t,
u can request black colour so cant see so clear at outside...

 

[mi_scuzi]

any suggestion how many points on satria?any point lesser than 6 points?

 

[ninja_iga]

hi proton63t,

if you'd like to stiffen your car, and maybe plan to keep it long, maybe a welded in cage is better.

road-blocks however, we cant guarantee anything for that.

 

[ninja_iga]

any suggestion how many points on satria?any point lesser than 6 points?

for Satrias,
maybe a half-cage is practical.

That's slightly cheaper too.
our Half-cage mounts to the seat belt mounting points for extra rigidity and strength.

 

[proton63t]

Ninja,

I think roll-caged my saga is reasonable. Is it same price RM900 ?
And yes, I'd like the rollcage to b in black color, possible ?

 

[ninja_iga]

hi

a welded in cage, wont be powder-coated just like the bolt-in.
It has to be spray-painted. *pls take note*

RM900 will be a very simple 6point welded-in.
To add more points or bars, is subject to your requirements and will cost accordingly.

Come and visit us in our shop in Ampang,
call me directly
Stanley

 

[proton63t]

thanks for the info, will looking forward to u.

Is it still the same place in Pandan Indah Ultra Racing workshop there?

 

[ninja_iga]

yes,
the one and only.

 

[mi_scuzi]

for Satrias,
maybe a half-cage is practical.

That's slightly cheaper too.
our Half-cage mounts to the seat belt mounting points for extra rigidity and strength.

okies..how bout the price of the half-cage?so the point properly will be around 4?

 

[ninja_iga]

hi

a half cage, can be welded on, or bolted on.

a bolted on would cost more, RM800
welded on, RM700

pls note: 4points only, no diagonal support. For diagonal/cross bar, pls add 150-200

 

[ninja_iga]

custom made roll-cages are also available for off-road 4 x 4 vehicles.

 

[monmon]

yikes... costly. approved by FIA?

 

[ninja_iga]

monmon

for the FIA spec steel, it'll be alot more expensive, about 4-5k?
that steel is a control item, and not sufficient demand to bring in the quantity.
hence, the very expensive price tag for a length of tube!

 

[GoldenHawk]

Can't the cages be made to blend in with the interior as to reduce suspicion by the authorities?
After all, the point of a cage like this is to stiffen the ride, to take a full track assult or roll over I guess...
Just a curious Saga owner

 

[ninja_iga]

GoldenHawk

it's possible, but it's more work.
and you may need to retrim your upholstery and interior to match. (like the German tuner, RUF )

 

[ninja_iga]

latest update* 13th Sept*

pls check 1st page for all the info. :)