Custom-made roll-cages available for various applications!

ninja_iga

3,000 RPM
Senior Member
Dec 1, 2003
3,376
2
3,138
Visit site
hi

it's been a whole year since we started our roll-cage program.
Since then, we've several Kancils roll-cages built and raced in the MSS SuperKompak series.
These cages are designed to be strong, stiff and comply with the rules and regulations of the race series, welded-on for best possible strength and safety.

Our roll-cages are:
  • strong
  • well designed
  • well built
  • fully welded joints
  • designed with your safety in mind
  • custom made to any race spec (please consult us on the possiblities)
  • proper spec steel in sizes and material (ERW or CDS)
  • applicable to just about any car (custom-made)
We also offer bolt-in designs, depending on application for various cars (trucks and 4WD are our recent projects)

Give us a call and find out more via a free-consultation service.
A cheap roll-cage can be easily done anywhere at any exhaust shop.
A properly designed cage will save your life, especially when you'd need it the most! (which is why you have one in the first place!)


Stanley
012-211-3039
UltraRacing
 

ninja_iga

3,000 RPM
Senior Member
Thread starter
Dec 1, 2003
3,376
2
3,138
Visit site
hi proton63t,

depends on your requirements.

A simple 6point, bolt-on without diagonal for street use may cost about RM900+
Add more bars, of course costs more.

Weld-in cages are cheaper simply because it's alot simpler and less material costs.

Please specify what's your requirements and for what use/event, we'll advise accordingly.

Stanley
 

proton63t

500 RPM
Senior Member
Mar 21, 2007
565
1
1,518
thanks stanley,

I have a sentimental oldjunk (saga), was my first car anyway, now the car feels so wobbly even in slow speed cornering. I just want to roll-cage it for normal street use and sometimes for some fast driving, thats all.

Car is 10yrs+- and engine is 4g15.

RM900 seems reasonable to me, what are your advises ?

Will the rollcage be very notieable from outside ? (wanna avoid roadblock all cost)

Regards
 

ninja_iga

3,000 RPM
Senior Member
Thread starter
Dec 1, 2003
3,376
2
3,138
Visit site
any suggestion how many points on satria?any point lesser than 6 points?
for Satrias,
maybe a half-cage is practical.

That's slightly cheaper too.
our Half-cage mounts to the seat belt mounting points for extra rigidity and strength.
 

proton63t

500 RPM
Senior Member
Mar 21, 2007
565
1
1,518
Ninja,

I think roll-caged my saga is reasonable. Is it same price RM900 ?
And yes, I'd like the rollcage to b in black color, possible ?
 

ninja_iga

3,000 RPM
Senior Member
Thread starter
Dec 1, 2003
3,376
2
3,138
Visit site
hi

a welded in cage, wont be powder-coated just like the bolt-in.
It has to be spray-painted. *pls take note*

RM900 will be a very simple 6point welded-in.
To add more points or bars, is subject to your requirements and will cost accordingly.

Come and visit us in our shop in Ampang,
call me directly
Stanley
 

proton63t

500 RPM
Senior Member
Mar 21, 2007
565
1
1,518
thanks for the info, will looking forward to u.

Is it still the same place in Pandan Indah Ultra Racing workshop there?
 

mi_scuzi

Known Member
Senior Member
Aug 7, 2005
219
0
1,516
Selangor
for Satrias,
maybe a half-cage is practical.

That's slightly cheaper too.
our Half-cage mounts to the seat belt mounting points for extra rigidity and strength.
okies..how bout the price of the half-cage?so the point properly will be around 4?
 

Random Post Every 5 Minutes

wat liquid u guys use? how much ah? where to buy? my aircon not cold still got gas means condensor dirty and i too lazy drive to aircon shop and want to save $$ and learn at the same time
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience