Custom Intake Manifold VR4 - 4G63T

[nismoskyliner33]

Anyone interested?

It comes with extra 4 injectors... that means, 1 extra injector for each chamber....

all you need is an injector controller...

pressure tested and proven in australia. improved torque and horse by more than 15% (without extra injector function) and 35% (with extra injector controller and aftermarket ECU)...

I have friends who wants me to do it for them but unfortunately the volume is not big enough. so now looking for those whose interested. this is because it is custom handmade, lotsa components need at least 10 pcs as a minimum quantity otherwise, they don wan to do...

i need 3 more guys who is really interested. Please PM me. cheers..

 

[jinkl]

price bro

 

[V8_nutter]

Injector placement/placing is wrong !

 

[hybrid evo]

Injector placement/placing is wrong !

why wrong bro? i know usually people place at the intercooler piping if got 2 pieces of extra injectors. if got 4 extra injectors not at the intake manifold as shown in the pictures ah bro?

 

[kRiminaLz]

Injector placement/placing is wrong !

no harm if it can still deliver sufficient fuel n increase performance..

 

[dolly]

krminalz, what he meant is the injector placement is at a bad angle. you are gonna spray the runner's wall with fuel. You'd ideally want it to shoot straight to the valves/chamber

 

[SR20VE]

can i know what material that been used to build your intake manifold?is it stainless?or alluminium?

 

[huakenny]

krminalz, what he meant is the injector placement is at a bad angle. you are gonna spray the runner's wall with fuel. You'd ideally want it to shoot straight to the valves/chamber

the air n fuel hv to mix together 1st before it get compressed....as long as it can mix then ok lo...no point shoot directly to valves a.....unless it is Diesel engine..

my2cent

 

[zakie]

brape harga?? give the price 1st laaaa,
then ask laa the material......

 

[abflug34]

talking about custom intake manifold. i have 1 silly question
looking from the pic below..
the standart intake manifold have some inlectsocket or pcv attach to the manifold.. but some intake manifold just come empty just solid. have TB hole and injector hole only.
http://img209.imageshack.us/img209/9313/intakefa6.png
http://img224.imageshack.us/img224/7949/magnusintakevy0.jpg
http://img147.imageshack.us/img147/174/magnusintake2lxs8.jpg

dont shoot me.. thanx..

 

[abflug34]

like the pic below. and compared to pic above.
http://img226.imageshack.us/img226/4624/image06fm2.jpg

 

[nismoskyliner33]

haha... frens... project over and done with.. its over.. sold 10 units to australia. no need compare or anything..

 

[abflug34]

haha... frens... project over and done with.. its over.. sold 10 units to australia. no need compare or anything..

i need some knowlegde about custom intake manifold..

 

[nismoskyliner33]

know ma tell lor.. dunno ma keep quiet lor..

i need some knowlegde about custom intake manifold..

ok... what do u want to know?

 

[davidv00]

hi nismoskyliner, besides VR4 and 4G63T, what other custom manifold you do?

 

[nismoskyliner33]

custom plenums..

hi nismoskyliner, besides VR4 and 4G63T, what other custom manifold you do?

yo david, i'm not doing anymore now.. as this custom thing is too expensive doing in malaysia.. thai's can do it half my cost.. no point. the buyers dont appreciate engineered stuffs that really works.. instead, only the look they r after..

if u want to custom your intake, "one-off", i can help you to do the calculations..

 

[davidv00]

send u PM for further discussion.

 

[abflug34]

dear davidvoo

i would like to ask about the hole at intake body. what is the function?vacum?for sensors? im still a new bee in this stuff. hope u can give some info.. thanx a lot bro
http://img98.imageshack.us/img98/9334/magnusevointakebottomlf3.jpg

 

[davidv00]

hi bro, i m not that qualified to answer your question here, please contact nismoskyliner33

 

[SR20VE]

hoping to know the anwers.. thanx david