Bloob sound for ur klekang sound door..

may i ask how to colok the hose inside?bcoz the hose is soft one right? how to make it hard so that can go into the hole easier?need some lubricant?wanna try it but wondering scare cannot go in or go in half way, since this is the 1st time ma...
 
done this yesterday.

the hose cost for 6 meter RM3.60 (1 x RM0.60) at DIY shop seksyen 18 shah alam.

feel the different. for RM3.60 it's worth to try for me.

**this hose soft. so u need to massage the rubber to allow this hose travel inside 'HER'... hahahahha.
 
anyone can show the pic of the hose use? as i noe there is two type, one is white color(trasparent) and another type is green color which is softer one. which one to use ler?scare later use the wrong one to cucuk into the door rubber...then cannot take out pulak...
 
heheheh.... the transparent wan bro.... dun wori bro....if ur door rubber hav little hole, there must be several. if canot jolok inside, try to jolok from another hole.

but actually the rubber got big hole inside. the hose small oni. around 3-4mm in diameter oni.... of u canot jolok that hose, maybe u can use sum lubricant...mayb wd40 or wateva....
 
B.U.M.P

sowwi.... miz my post... its been a long time... :D
 
Sound proof your door helps to make your interior more comfortable as it eliminates sounds from outside..lots of accessories shop have this.

Plus the 'petua', the result will be better :)
 
i tried it recently but it didt seem to give me good result, the klekang seem to come from the metal to metal contact sound from door latch

anyway to improve this?
 
wait..if sound proof our car.got advantage and disadvantage right..can i know what the disadvantages of sound proof our car? means like if driveshaft not nice already cant hear ah? i dun have any experiences on sound proof .. tak pernah cuba but wanna put at my car..ehhh i see all the reply in this thread many "jolok" words :biggrin::marchmellow:

---------- Post added at 11:19 PM ---------- 6 hour anti-bump limit - Previous post was at 11:17 PM ----------

ehh to topic starter..can u post picture of first after ada hole at the rubber then the tube pic and how u "masuk" the aquarium tube..huhuhu i dunno sorry for asking u . hehe.coz i noob in diy ni~
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience