AFR setting for B16A

[Oderf]

ya lo.... how can it be possible ? i mean using fpr but still can get lean at low rpm and rich mixture at high rpm ? aiyyo..penin wooo....

or better dun use fpr n just set the vafc tu have lean and rich mixture combination throughout the rpm range ? ajar la sifu2 sekalian....

 

[hattech-v]

jilo4 use 4 fpr if not mistaken.. ekekkeke

 

[EFN]

B16A Series
- Standard Pressure (with Vacuum Hose connected at Idle) = 30PSI
- Full Throttle =40PSI

Optimal setup for B16A with RON97 Fuel & Performance Mods
- Around 32 to 36PSI (With Vacuum Hose Connected at Idle)

But then each engine is different even if they belong to the same family, so testings & dyno is highly recommended

* 14PSI = 1BAR
*28PSI = 2BAR

Hope this helps.

 

[hattech-v]

there master of FPR has spoken...

 

[Oderf]

Thanks bro, i've been running rich all this while then.... haiyyo... no wonder la fc so high... sigh...

 

[hattech-v]

fc high shudnt be a problem for u.... u rich guy.. haha

 

[Oderf]

if rich i wont be running on B16A la bro.... at least B18CR.... or maybe K20A... ada brani ? ha..ha..ha...