How to tune 1.5 honda carb engine? Its the single carb engine.. I wan to tune it for better pick up and FC. Me newbie here. Need alil help from the sifu's
PJ area..
Need some info on tuning the idling a/f screw on stock Aisan carburettor on Proton 4G15P, imagine we all looking from inside the car to outside, the screw, when we turn clockwise is lean or rich?
Also, the car seemed to be a little spluttering/juddering when release the pedal(throttle down), does that mean it's running a little too rich?
screw in means lean... screw out means rich....Need some info on tuning the idling a/f screw on stock Aisan carburettor on Proton 4G15P, imagine we all looking from inside the car to outside, the screw, when we turn clockwise is lean or rich?
Also, the car seemed to be a little spluttering/juddering when release the pedal(throttle down), does that mean it's running a little too rich?
screw in means lean... screw out means rich....
screw in = direction how u close tap water
screw out = direction how u open tap water
but there is more than jz screwing in/out the AFR screw... opening/closing the fuel jet in the carburetor also plays an important part... notice the nut size 17 jz below the AFR screw behind ur carburetor??.. thats where the fuel jet located...
all fuel jets of weber DGV located inside the carburetor... which means u need to take the carburetor apart to get access to those jettings....wat bout the 32/36 weber bro.. where is the fuel jet screw?
all fuel jets of weber DGV located inside the carburetor... which means u need to take the carburetor apart to get access to those jettings....
datz why last time Ramly dont like to see my face each time i go back there for tuning... unlike dcnf or dcoe which can change jetting without removing the whole carburetor assembly....
forgot already lo... sold my weber few years back... ramly didnt want to teach me how to tune weber carburetors... kedekut fella.....ow oke.. i think i know which 1.. btw, wat size is your jetting?/ eheheee..
forgot already lo... sold my weber few years back... ramly didnt want to teach me how to tune weber carburetors... kedekut fella.....
no idea... lolz... can try find tofu_maniac... he is from sarawak, but not kuching laa... dunno either sibu or miri... forgot already...haha.. do u know any1 in kuching dat can tune weber besides nick.. ehehee.e.
no idea... lolz... can try find tofu_maniac... he is from sarawak, but not kuching laa... dunno either sibu or miri... forgot already...
hehehe bro what is your dcnf 40 problem ? n my i know where r u ? sarawak ?i got one 40 dcnf, but bro.. not advisable.. part hardly to find bro..
hehehe bro what is your dcnf 40 problem ? n my i know where r u ? sarawak ?
Similar threads | |
---|---|