Microtech

[vteckiller]

Teh Microtech LT10-s have Gnd at beside the crank input 1 and also the Power M/C beside the crank input 2 is use for what? Where I can get the ignition input drawing diagram?

Bump: Teh Microtech LT10-s have Gnd at beside the crank input 1 and also the Power M/C beside the crank input 2 is use for what? Where I can get the ignition input drawing diagram?

hope this will help u out..its lt8 but the crank sensor wiring is 100% the same..
http://www.microtechefi.com/pdf/LT8HONDAVTEC16Toothanti-clock.pdf

Bump:

Teh Microtech LT10-s have Gnd at beside the crank input 1 and also the Power M/C beside the crank input 2 is use for what? Where I can get the ignition input drawing diagram?

Bump: Teh Microtech LT10-s have Gnd at beside the crank input 1 and also the Power M/C beside the crank input 2 is use for what? Where I can get the ignition input drawing diagram?

http://www.microtechefi.com/pdf/LT8HONDAVTEC16Toothanti-clock.pdf
try this la..
the lt10s and lt8 shares the same cranksensor wiring

 

[zaxxmivec]

best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

 

[vteckiller]

best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

y your friend so poor thing one..
could be due to many factors...poor rebore or timing not right or fuel pump presure not constannt..

since u scared better u install afc la..

 

[3rd GearPerformance House]

U cant say the ECU is a problem,over 100pc of ecu im install with stock engine,never facing any problem.But some time have a problem with the other engine rebuilder.For me when tuning for daily driving we make a economic fuel comsuption.For boost and performance depent on your engine set up.For stock Mivec 1.6 we make 165whp and good torque.Pls beware with a Non Authority Microtech tuner.

best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: U cant say the ECU is a problem,over 100pc of ecu im install with stock engine,never facing any problem.But some time have a problem with the other engine rebuilder.For me when tuning for daily driving we make a economic fuel comsuption.For boost and performance depent on your engine set up.For stock Mivec 1.6 we make 165whp and good torque.Pls beware with a Non Authority Microtech tuner.

best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

Bump: best,good,performance for microtch,that wht i know.... i want try 4 my wira mivec but stil afraid about wht happen 2 my friend, 1 week after instll, engine get overhl, piston ring jam, oil engine smell petrol, full tank petrol can use about 200km..... explain bro.tq?

 

[zaxxmivec]

thanks bro!!! maybe

(Pls beware with a Non Authority Microtech tuner.) my prend say, 'tuner' at industrial area in subang... jz beware maybe....:wavey:

Bump: thanks bro!!! maybe

(Pls beware with a Non Authority Microtech tuner.) my prend say, 'tuner' at industrial area in subang... jz beware maybe....:wavey:

 

[3rd GearPerformance House]

Yah good for u and your frends..

thanks bro!!! maybe

(Pls beware with a Non Authority Microtech tuner.) my prend say, 'tuner' at industrial area in subang... jz beware maybe....:wavey:

Bump: thanks bro!!! maybe

(Pls beware with a Non Authority Microtech tuner.) my prend say, 'tuner' at industrial area in subang... jz beware maybe....:wavey:

 

[vteckiller]

i wonder who he is refering too? in subang industrial ?

 

[3rd GearPerformance House]

Better go to Mellinium la bro...he expert person about mikotek la bro.Have a good dyno facility there.

Bump: Better go to Mellinium la bro...he expert person about mikotek la bro.Have a good dyno facility there.

 

[kimloong_8]

How I can change the Input Trig and Out Put Trig? I cann't find in the Microtech LT10 inside the setup screen!!!! My only can see Teeth CAS and TDCref CAS. How I know the microtech ECU for the car model? Thank

 

[cooljas]

is this thread gonna get burning soon?i smell smoke.........

 

[Enslaved]

U cant say the ECU is a problem,over 100pc of ecu im install with stock engine,never facing any problem.But some time have a problem with the other engine rebuilder.For me when tuning for daily driving we make a economic fuel comsuption.For boost and performance depent on your engine set up.For stock Mivec 1.6 we make 165whp and good torque.Pls beware with a Non Authority Microtech tuner.

How much would you usually be able to tune for a 1.8 mivec with stock cams and stock CR of 11? Using 1.8 stock pistons. Thanks

Bump:

U cant say the ECU is a problem,over 100pc of ecu im install with stock engine,never facing any problem.But some time have a problem with the other engine rebuilder.For me when tuning for daily driving we make a economic fuel comsuption.For boost and performance depent on your engine set up.For stock Mivec 1.6 we make 165whp and good torque.Pls beware with a Non Authority Microtech tuner.

How much would you usually be able to tune for a 1.8 mivec with stock cams and stock CR of 11? Using 1.8 stock pistons. Thanks

 

[3rd GearPerformance House]

That ECU for Nissan engine.

How I can change the Input Trig and Out Put Trig? I cann't find in the Microtech LT10 inside the setup screen!!!! My only can see Teeth CAS and TDCref CAS. How I know the microtech ECU for the car model? Thank

Bump: Around 170-175whp but Mivec come from Mellinium all power2.Like a KAP from MAG.Izam Mivec and others.

How much would you usually be able to tune for a 1.8 mivec with stock cams and stock CR of 11? Using 1.8 stock pistons. Thanks

Bump:

How much would you usually be able to tune for a 1.8 mivec with stock cams and stock CR of 11? Using 1.8 stock pistons. Thanks

 

[Enslaved]

Bump: Around 170-175whp but Mivec come from Mellinium all power2.Like a KAP from MAG.Izam Mivec and others.

Yes but most are turbocharged! i plan on keeping mine NA...thanks for the info!

 

[3rd GearPerformance House]

That number the Hp is NA la bro not for turbo la.Kalau turbo charge already 320whp and 300lb torque.

Yes but most are turbocharged! i plan on keeping mine NA...thanks for the info!

Bump: That number the Hp is NA la bro not for turbo la.Kalau turbo charge already 320whp and 300lb torque.

Yes but most are turbocharged! i plan on keeping mine NA...thanks for the info!

 

[N-gage]

syah,who win sdb,haaa?????

 

[kimloong_8]

That ECU for Nissan engine.


This it can use in all nissan car or for some model only?

 

[3rd GearPerformance House]

Only for nissan.

That ECU for Nissan engine.


This it can use in all nissan car or for some model only?

Bump: Not sure.i go back early.but many car heve a problem that day.hope 2nd race again get a good result.but we enjoy with a new timing.

syah,who win sdb,haaa?????

 

[Trinityblood]

A class.
1.charade 4wheel.
2.Evo9 stpowered.
3.Evo7 th 87

B class.
1.Ah lai r eng.
2.Blue satria(otr body)
3.

C class and others
dint pay attn....:sleep:

very late race edi...but good new timing light and damm big screen timing result,juz
the placement a bit off..could be higher would be nice...

 

[Enslaved]

That number the Hp is NA la bro not for turbo la.Kalau turbo charge already 320whp and 300lb torque.

Yes i know..i was just commenting about Millenium's power packed cars, they are mostly turbocharged..how much torque on average can be extracted from the 1.8 mivec NA?

 

[SDF]

A class.
1.charade 4wheel (10.9)
2.Evo9 TH87 (11.5)
3.Evo9 STPower (10.3)



Bump: A class.
1.charade 4wheel (10.9)
2.Evo9 TH87 (11.5)
3.Evo9 STPower (10.3)