The 4agze Forum

[turbo10]

im using a 4afe ori knock sensor........no rpm cut at all~!!!! juz used it 2day~!!!!so happy~!!!

no rpm cut at all? can u elaborate more on that? no rpm cut umean can rev until max?

 

[scoupe]

does that mean, got no power dip at5k plus rpm?

 

[miriguy]

i think what he is trying to say is about the power loss at 5.5k rpm.
i had that prob as well when i was trying with another SC. My boost is 1.05 bar and he is only merely 0.8 bar. surprisingly he can catch up with me.

 

[lilwhite]

to change it aa......mine ori knock sensor worn off....so i try my luck on my 4afe knock sensor...it works.....and yeah...there is no power dip at 5.5.......im sorry i really hav no idea how 2 change it....


and according to wat miriguy says....i think da 0.8 boost must hav done some tuning on da fuel supply.....

 

[miriguy]

can you ask your mechanic how he reach the sensor?

whats yr boost level now?

 

[c70]

Hi... I have ae101 gze into ae92 longmeter.
Had the same problem with you.
So I used the old speed meter gear from ae92 gze connected to the long speed meter. But problem is i still have my original ae101 speed meter gear connected and hanging in the engine bay, because if i remove it, i will get my engine check light on (because ecu detecting speed meter not running). *sigh*...HELP!!!

Then for rpm, I have used the digital to analogue rpm 'sensor' (don't know the actual term for it) from VR4. Its a square black color sensor with 3 connectors.

Mayb other sifus here can tell how they did their connection for ae101 gze digital meter to our local ae92/111 analogue meters?

Cheers.

guys....i juz installed da meter....from ae111....da speed and evthing is running good.....but oni da rpm is not working......anyone face these kinda prob b4???or its da prob wit da meter?

 

[miriguy]

today changed knock sensor to the one from a Supra. i still get the power dip.
what injector is best for 4agze?

 

[corolla92levin]

today changed knock sensor to the one from a Supra. i still get the power dip.
what injector is best for 4agze?

gsr..1.8.enough

 

[miriguy]

plug and play?

 

[miriguy]

i removed the ABV to test the power dip, still the same. what could be the problem? My charger or injector?

 

[shamburke]

i that case it is the limit that has been set by the computer....
still by removing the sensor..then the engine unit and the charger unit.. also is another issue...

rest assured than, if you still not happy, tukau 3sgte!!!

 

[futeball]

hehehehe.... agree with bro sham.....i think that's the best way to satisfy ur need....
also u can bolt on turbo.....sure no power dip after this....
have the "siput" thing....sure can boost to 3 bar....hehehe...

many others choices....1jz also can ma...Malaysia Boleh!

 

[miriguy]

its not that i dont want to BOT, im just not satisfied or not fully played with SC yet. Its also a common problem.

i havent remove the speed sensor from the ECU yet, not sure if that helps or not. Im sure its not a faulty charger.

im going to adjust the timing, maybe lowering it abit to see how it goes. The needle marker has been removed when i installed in a larger pulley.

 

[futeball]

good luck on ur R&D....:top:

 

[miriguy]

adoi, i need to change to my stock pulley before i set the timing. Will update you guys again. From my adjustable fuel regulator, my pressure is set to 48. is that normal? it cant be adjusted any lower.

 

[miriguy]

can i put in AE92 4agze MAP ECU into my AE101 MAP engine? the sockets are the same
any pros and cons?

Bump: can i put in AE92 4agze MAP ECU into my AE101 MAP engine? the sockets are the same
any pros and cons?

 

[EvolutionZ]

HI SIFUS,

any recommendation on what spark plug to use for 4AGE 16v 1600 engine?
juz bought it, so mechanic recommend lots of after market part and i also blur....cozt me bout rm200 wor...but i dont think this engine must use those high quality premium plugs like evos or scooby...

need advice...thanks

Bump: HI SIFUS,

any recommendation on what spark plug to use for 4AGE 16v 1600 engine?
juz bought it, so mechanic recommend lots of after market part and i also blur....cozt me bout rm200 wor...but i dont think this engine must use those high quality premium plugs like evos or scooby...

need advice...thanks

 

[futeball]

miriguy - The 101 map ecu cannot fit/run in ae92 map/airflow although the 3 sockets are the same, but the serial/model number are not the same. My "pomen" already test it last week. For more detail, ask Dr. Wong....

EvolutionZ - Just buy regular ngk or denso plug....cheap & easy to find. ur mechanic recommend u the performance plug, that's why the price is rocket high...but it comes with good quality & performance.

 

[miriguy]

hi guys

can FCD help the power loss at 6k?

Bump: hi guys

can FCD help the power loss at 6k?

 

[futeball]

thought already finish with that 6k power loss....:sleep::sleep:
try join the Aussie forum and ask there....the Aussie have many expert & otai with chargers.

here i think no idea how to overcome ur power loss.... as bro shamburke stated earlier....
just think about what he said.... he's otai with chargers since i was in secondary school....

if not, u just waste ur time & money with r&d but the output still the same.....no solutions....
maybe after 8 to 10 times changing 'things' in your car then u'll get the result....but the big question is when? is it on the 10th try? or the 100th try?
don't use highway, use shortcut....

my 2 cent....