Seeking help on turbo boost

[vr2turbo]

cant think of any other solutions for you bro, kinda rusty now....anyways do update once the issue managed to be solved.

Because his problem is unique. The ikan tulang can control the amount of boost but his is not going up so nothing to control......lol

 

[kurt_629]

Because his problem is unique. The ikan tulang can control the amount of boost but his is not going up so nothing to control......lol

mine already config to 100% always boost.. also cannot boost with the air flow sensor..

 

[DanzEterna]

will your engine die if you remove the MAF sensor?

 

[kurt_629]

will your engine die if you remove the MAF sensor?

Will. I cannot do that on normal road. Especially during traffic light, when coming to stop, the engine wll dies off due to no aid flow sensor.
Then I cannot step brake.
Super dangerous..

Look on the bright side, I got a safety car that cannot boost. Haha

 

[DanzEterna]

I experienced one time that my car also unable to boost more than 0.5, I thought was the turbo actuator,
but actually required some vacuum hose routing & snap on the "tulang ikan", after that able to boost beyond 0.5bar.

 

[kurt_629]

I experienced one time that my car also unable to boost more than 0.5, I thought was the turbo actuator,
but actually required some vacuum hose routing & snap on the "tulang ikan", after that able to boost beyond 0.5bar.

definitely a lot of thoughts and time spent on my car..

some mechanic say its the turbo, advise me to change.
but if its the turbo, why can I still boost to 1 bar when I remove the air flow.

if there's a need to change, I would change..
I just got conned too many times..
I came to know the wastegate is gone, either its fake or sold to me in bad condition as half cut..
anyway, I already inform the mechanic, going to do a replacement for me..
this is the 3rd wastegate..

 

[DanzEterna]

u need to custom a downpipe for the wastegate too

 

[kurt_629]

u need to custom a downpipe for the wastegate too

I have that..
even wrapped in thermal

manifold, coated in ceramic high temp paint..

very kiasu..

 

[vr2turbo]

I have that..
even wrapped in thermal

manifold, coated in ceramic high temp paint..

very kiasu..

Why kiasu, mine everything stock.....lol

 

[mike_lim12]

have u check ecu?

Sent from my SM-N9208 using Tapatalk

 

[kurt_629]

have u check ecu?

Sent from my SM-N9208 using Tapatalk

nope, going to when I am back from holiday

 

[vr2turbo]

So many things to check on........

 

[mnymy]

Kurt..check your Blow Off. If it leak it will trhrow out the air pressure required by the engine to achieve boost. Put your hand in front of it nose and pull the accelerator using your hand..if some air comes out when u open the throttle then it is already damage. The air should only comes out after the desired boost..for standard evo 3 is 0.7 bar. Let us know the finding.

 

[kurt_629]

Kurt..check your Blow Off. If it leak it will trhrow out the air pressure required by the engine to achieve boost. Put your hand in front of it nose and pull the accelerator using your hand..if some air comes out when u open the throttle then it is already damage. The air should only comes out after the desired boost..for standard evo 3 is 0.7 bar. Let us know the finding.

if standard evo 3 is 0.7bar, that is what I am having now..

then how do you explain if I took out the air flow, I can boost till 1.0 bar?

my blow off, is standard Mitsubishi, the black boring looking type, once its throw out, the air will goes back to the engine again

 

[vr2turbo]

My standard is 0.6, but one time my vacuum hose broke and I boost 1.1.....lol

 

[DanzEterna]

if standard evo 3 is 0.7bar, that is what I am having now..

then how do you explain if I took out the air flow, I can boost till 1.0 bar?

my blow off, is standard Mitsubishi, the black boring looking type, once its throw out, the air will goes back to the engine again

u r using the std recirculating bov? the air will be directed into the turbine, y not use the external type?

 

[vr2turbo]

I think he changed back all to standard......lol

 

[kurt_629]

u r using the std recirculating bov? the air will be directed into the turbine, y not use the external type?

told you guys, I'm a stock/standard.

nothing is modified..

hey buddy, how are you?
I probably will go genting on Xmas, not exactly the genting but bukit tinggi area.
If you are free, let's do a meet up? :rolleyes:

 

[DanzEterna]

told you guys, I'm a stock/standard.

nothing is modified..

hey buddy, how are you?
I probably will go genting on Xmas, not exactly the genting but bukit tinggi area.
If you are free, let's do a meet up? :rolleyes:

wassup buddy, fine tq bro
long way till xmas, nothing la in bukit tinggi, genting better
no worries, so far no plans yet....u driving your evo3 during your trip?

 

[kurt_629]

wassup buddy, fine tq bro
long way till xmas, nothing la in bukit tinggi, genting better
no worries, so far no plans yet....u driving your evo3 during your trip?

bukit tinggi got nice food, very fresh.
lots of tongka ali for sale.

yeah, once confirmed, I give you a ring.

yeah, the lousy evo 3.. can only boost 0.7 bar..
no money to buy new car.
plus already spend so much to recon the car..
hence had to live with it