Mivec Club

[rockfire82]

anyone knows where to replace the ecu capacitors. the mivec.co.nz recomend to replace capacitor for those >10 years ecu.

 

[popout]

hi
anyone tried e-manage on 1.6 mivec (A) and how da performance??

 

[mojotudam]

hi, just wanna ask if u guys can recommend any good mivec mechs in subang area. my mivec can't seem to engage:hmmmm:

 

[jjchow]

hi newbie reporting in..... juz wanna ask when got a tt for mivec club here..?

 

[dundi]

yaya.. when got tt ??

 

[soonhongauto]

DENSO Iridium Brand New IK16/20 Offer @ RM 180/4pcs
Free Gifts includes:
1) Iridium Plug gapping from 1.1mm to 0.8mm (worth RM 40/set)
2) 1 x Limited Iridium Hp Strap (Worth RM 25/pc)
3) 3 x Iridium Stickers (Worth RM 12)

Benefits of Gapping to 0.8mm:
http://www.globaldenso.com/PLUG/catalog/t-manual/pdf/P052.pdf

Plug Gapping from 1.1mm to 0.8mm:
http://www.globaldenso.com/PLUG/catalog/asia/pdf/P016.pdf
As long as IK16/20 (Original 1.1mm) once is gapped to 0.8mm => more power and performance can be expected (immediate effect after installed).

For more info, pls surf to:
http://www.zerotohundred.com/newfor...m-power-with-gapping-free-gift-promotion.html

Measurement of plug gapping to 0.8mm will be shown to buyer during order collection.

 

[phantomRX8]

guys, i have a question. has anyone heard that civic b16b type r pistons can be used on a mivec engine? coz i read b4 in a local bahasa car mag of a mivec which uses CTR pistons. sure it involves a lil' bit of modification but still it can be done right? anyone has any idea or info on this?

 

[lost78]

IK22 for mivec is already set gap to 0.8mm. based on what i found myself and from denso homepage. so no need to custom gap

 

[dav]

hi to all the mivec sifus out der...
may i noe which part of kepong is mr henry aka ahloon's workshop located at ??
planning to pay a visit to his workshop....thinking of hybrid my 1.6 mivec to 1.8....

and i would lik to noe a safc2 can fine tune a hybrid 1.8 mivec anot ???
or i can onli use either vafc2 or emanage ? coz i nw own 1 safc2 and thinkin of whether it still can b use anot...

ohh yeaa btw i m new here can i join the club ??
i gain alot of knowledges read thru tis forum....

 

[rell]

hey anyone know how much is a mivec head wif da ecu box too? i wanna buy to fix it wif my 4g92 block. can anyone help me out?

 

[zul218]

hi to all sifus and mivec owner,

do u all know what is bar setting when replacing Jun T2 cam? my mechanic just replaced Jun T2 cam. engine can start but valve bar made a lousy sound. the gap is very2 big to cam. then my mechanic reset back valve bar, int 15 n ext 20. the sound disappear but engine cannot start. the engine will start if give more fuel. in bahasa tarik skit la cable throttle tu. so anyone can help me?

TQ

 

[soonhongauto]

Brand New DENSO Iridium with Gapping Offer + Free Gifts Promo
IK/Q/W16/20 @ RM 180/4pcs
IK/Q/W22/24, IKH/IT16/20L@ RM 190/4pcs

Free Gifts includes:
1) Iridium Plug gapping from 1.1mm to 0.8mm (worth RM 40/set)
2) 1 x Limited Iridium Hp Strap (Worth RM 25/pc)
3) 3 x Iridium Stickers (Worth RM 12)

Benefits of Gapping to 0.8mm:
http://www.globaldenso.com/PLUG/catalog/t-manual/pdf/P052.pdf

For more info, pls surf to:
http://www.zerotohundred.com/newforums/engine-and-performance/172852-denso-iridium-power-with-gapping-free-gift-promotion.html

As long as IK/KH/Q/W/T16/20L (Original 1.1mm) once is gapped to 0.8mm => more power and performance can be expected (immediate effect after installed).

Measurement of plug gapping to 0.8mm will be shown to buyer during order collection.

 

[kevinn7]

bila tt again la...

 

[skywalker.campro]

hello guys..
i'm a newbie here.. currently driving waja with CJ4A Mivec inside..
locatin in shah alam.. hopefully can make as much friends and sharing knowledge here.. thanks..

 

[skywalker.campro]

what happened to this club?? not active anymore?? so sad laa like this..what if somebody organize a TT, then we all can gather...hehe

 

[heavyfoot]

hello guys..
i'm a newbie here.. currently driving waja with CJ4A Mivec inside..
locatin in shah alam.. hopefully can make as much friends and sharing knowledge here.. thanks..

Hehe same here...

 

[sreshtapatil]

any idea where i can find pistons anywhere in the world for 4g92.. dohc mivec.. please help..

 

[bride1987]

bro... my fren is using 4g92 mivec now.... he's planning to change to 4g93 block... i wanna ask can the mivec piston be used in the 4g93 block? and wat else need to mod to change the block.... thanks to all mivec bros.... :)

 

[popout]

wat is the diffrent btw 4g92 DOHC non-mivec and mivec piston??

 

[skywalker.campro]

mivec piston gives more higher compression.. thus resulted your car faster response / pick up..

 

[popout]

Anyone can advise me plz my mivec auto pickup worst than a 1.3 wira why .......my engine sound smooth during during normal drive but when above 5k the mivec activated and car still feel under power. same as my previous engine 1.5 auto sifu help me plz

 

[GTR]

problem

i think ur MIVEC did no operate. whats the maximum RPM can achive now?

 

[popout]

my mivec sure engage when above 5k rpm the sound change but feel no power too , by the way my paiping is stock which is 1.5 one , is the painping cause such low power??

 

[LSLMIVEC]

hi all newbie here. just wanna ask anyone here can quote me price for timing belt kit set for mivec(include timing belt, bearing & other part needed)

 

[soonhongauto]

Brand New DENSO Iridium with Gapping Offer + Free Gifts Promo

IK/Q/W16/20 @ RM 180/4pcs
IK/Q/W22/24, IKH/IT16/20L@ RM 190/4pcs

Free Gifts includes:
1) Iridium Plug gapping from 1.1mm to 0.8mm (worth RM 40/set)
2) 1 x Limited Iridium Hp Strap (Worth RM 25/pc)
3) 3 x Iridium Stickers (Worth RM 12)

Benefits of Gapping to 0.8mm:
http://www.globaldenso.com/PLUG/cata...l/pdf/P052.pdf

For more info, pls surf to:
http://www.zerotohundred.com/newforums/engine-and-performance/172852-denso-iridium-power-with-gapping-free-gift-promotion.html

As long as IK/KH/Q/W/T16/20L (Original Gap from Factory 1.1mm) once is gapped to 0.8mm => more power and performance can be immediately felt after installed.

Measure of plug gapping to 0.8mm will be shown to buyer during order collection.